/live/media/VI/VI_9917356B_Ang.jpg)
BBB Industries 99-17356B Disc Brake Caliper - Front Left
| Brand | BBB Industries 99-17356B |
|---|---|
| Position | Front Left |
| Pads Included | No |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Inlet Fitting Type | Banjo bolt |
| Caliper Color | Gray |
| Piston Material | Steel |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Size | M10-1.0 x 32 |
| Bleeder Screw Thread (mm) | M10-1.0 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Cast Numbers | 5702 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Finish | Rust preventative |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 5702 |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Piston 1 Diameter (mm) | 57 |
| Piston Outside Diameter (in) | 2 |
| Piston Outside Diameter (mm) | 57 |
| Piston Quantity | 2 |
| Wear Sensors Included | No |
| Fits | — |
Remanufactured caliper. Includes installation hardware for a ready-to-install replacement.
Cast iron housing. Provides durable braking performance with a rust-preventative finish.
Dual-piston design. Delivers strong, even clamping force for consistent brake response.
BBB Industries 99-17356B Reman Caliper Overview
BBB Industries 99-17356B is a remanufactured disc brake caliper with installation hardware for brake hydraulic service. It features a cast iron housing, gray rust-preventative finish, steel pistons, and a 57 mm dual-piston design for consistent braking performance. This reman caliper w/ installation hardware line is built for direct replacement service where the original caliper uses a banjo bolt inlet and M10-1.0 bleeder and inlet threads.
Key Features
- Remanufactured disc brake caliper with bracket included
- Cast iron construction with gray rust-preventative finish
- Dual 57 mm steel pistons
- Caliper slides included for service-ready installation
- Bleeder screw included; dust boots included
- Banjo bolt inlet fitting with M10-1.0 thread sizing
- Brake pad installation hardware included where applicable
- Housing and bracket cast number 5702
Product Details
The BBB Industries reman caliper w/ installation hardware, part number 99-17356B, is a brake hydraulics replacement component built around a remanufactured cast iron body and a two-piston layout. The gray finish adds rust prevention, while the included bracket, slides, bleeder screw, and dust boots support a complete caliper service. For shoppers searching for a BBB Industries brake caliper for Honda Civic or Acura Integra brake repair, 99-17356B provides the core hydraulic hardware needed for a direct caliper replacement where the application matches the listed thread and inlet specifications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Repair Uses
- Leaking brake fluid at the caliper body or bleeder area
- Uneven brake pad wear caused by sticking caliper pistons
- Corrosion on the original caliper housing or bracket
- Brake drag from worn slides or damaged dust boots
- Brake pedal feel issues related to caliper hydraulic wear
Installation Notes
Verify inlet fitting type, thread size, piston diameter, and bracket configuration before installation. Replace copper crush washers where applicable and bleed the brake system after installation to remove air from the hydraulic circuit. Confirm pad fitment and rotor condition during service, and inspect the mounting points and brake hose connection for wear or damage. This BBB Industries 99-17356B caliper is intended for applications that match the listed brake hardware and hydraulic specifications.
Quality Assurance
BBB Industries remanufactured brake components are built for replacement service using application-specific hardware and dimensional specifications. Confirm vehicle fitment by matching the caliper casting numbers, inlet thread, and piston size to the original part before ordering.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||