/live/media/VI/VI_9917411B_Ang.jpg)
BBB Industries 99-17411B Disc Brake Caliper - Front Left
| Brand | BBB Industries 99-17411B |
|---|---|
| Position | Front Left |
| Pads Included | No |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Inlet Fitting Type | Banjo bolt |
| Caliper Color | Gray |
| Piston Material | Steel |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Size | M10-1.0 x 33 |
| Bleeder Screw Thread (mm) | M10-1.0 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Cast Numbers | 5705 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Finish | Rust preventative |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | A940, 5705 |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Piston 1 Diameter (mm) | 57 |
| Piston Outside Diameter (in) | 2 |
| Piston Outside Diameter (mm) | 57 |
| Piston Quantity | 2 |
| Wear Sensors Included | No |
| Fits | — |
Remanufactured caliper. Includes installation hardware for a ready-to-fit replacement.
Cast iron construction. Built with steel pistons and a rust-preventative finish.
Complete hardware included. Comes with bracket, bleeder screw, dust boots, and slides.
Remanufactured Brake Caliper for Disc Brake Service
BBB Industries 99-17411B is a remanufactured disc brake caliper with installation hardware for brake hydraulic service. It features a cast iron housing, gray rust-preventative finish, steel pistons, and a 57 mm dual-piston design for consistent braking performance. This BBB Industries reman caliper w/ installation hardware is built for applications that use a banjo bolt inlet and M10-1.0 bleeder and inlet threads.
Key Features
- Remanufactured disc brake caliper for brake hydraulic replacement
- Cast iron construction with gray rust-preventative finish
- 57 mm steel pistons with dual-piston design
- Caliper slides included for service-ready installation
- Bracket included for the specified application
- Bleeder screw included; dust boots included
- Banjo bolt inlet fitting type
- Package contents include brake pad installation hardware with banjo bolt and copper crush washers where applicable
Product Details
BBB Industries 99-17411B is a reman caliper built for disc brake hydraulic repair where the original unit uses a 57 mm, two-piston layout and a bracketed mounting design. The gray finish helps resist corrosion, while the cast iron housing and steel pistons provide the structural characteristics expected in a brake caliper replacement. This part number 99-17411B is a practical choice for brake service on vehicles such as Honda Civic and similar applications that require the same caliper configuration.
BBB Industries reman caliper w/ installation hardware is part of the brand’s remanufactured brake hydraulics offering, focused on restoring original-style fit and function for service technicians and DIY brake repairs. If your vehicle calls for a banjo bolt inlet, M10-1.0 threads, and a bracketed caliper assembly, part number 99-17411B is built to match those requirements.
Common Problems This Part Can Address
- Brake drag caused by a sticking or seized caliper
- Uneven braking from worn piston seals or internal corrosion
- Brake fluid leakage at the caliper body or bleeder area
- Noise or vibration related to caliper wear or damaged hardware
- Reduced braking response from a failing hydraulic caliper assembly
Installation Notes and Tips
Verify caliper mounting style, inlet fitting type, piston size, and thread specifications before installation. This caliper uses a banjo bolt inlet and M10-1.0 thread sizing, so matching the original brake hose connection is important. Inspect brake hoses, pads, rotors, and mounting surfaces during service, and bleed the brake system after installation to remove air from the hydraulic circuit. Confirm vehicle-specific fitment for the exact Honda Civic application before ordering.
Quality Assurance
BBB Industries remanufactures brake components to support OE-style replacement needs with service-ready hardware and application-specific construction. Part number 99-17411B is remanufactured and inspected for brake hydraulic replacement use.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||