/live/media/VI/VI_9917963A_Lef.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
BBB Industries 99-17963A Disc Brake Caliper - Rear Right
| Brand | BBB Industries 99-17963A |
|---|---|
| Position | Rear Right |
| Pads Included | No |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Inlet Fitting Type | Banjo bolt |
| Caliper Color | Gray |
| Piston Material | Phenolic |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Size | M10-1.0 x 33 |
| Bleeder Screw Thread (mm) | M10-1.0 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Finish | Rust preventative |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 8c24-2k327/8-b, 3055/6 |
| Inlet Port Thread Size (in) | 3/8-24 |
| Inlet Thread Size | 3/8-24 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Piston 1 Diameter (mm) | 54 |
| Piston Outside Diameter (in) | 2 |
| Piston Outside Diameter (mm) | 54 |
| Piston Quantity | 2 |
| Wear Sensors Included | No |
| Fits | — |
Remanufactured caliper. Includes installation hardware for a quicker, easier brake service.
Cast iron housing. Delivers durable strength with a rust-preventative finish.
Complete brake hardware. Includes bracket, bleeder screw, dust boots, and slides.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Remanufactured Disc Brake Caliper Overview
BBB Industries 99-17963A is a remanufactured disc brake caliper with installation hardware for brake hydraulic service. It features a gray cast iron housing, a 54 mm phenolic piston, and a rust preventative finish for dependable replacement on the correct application. This BBB Industries reman caliper w/ installation hardware is built for drivers searching for a direct-fit brake caliper replacement, including Ford Mustang brake caliper and Ford Explorer brake caliper applications where this part number is specified.
Key Features
- Remanufactured disc brake caliper from BBB Industries
- Part number: 99-17963A
- Gray cast iron construction with rust preventative finish
- 54 mm phenolic piston for hydraulic actuation
- Bracket included for the specified application
- Bleeder screw included
- Caliper slides included
- Dust boots included
- Banjo bolt inlet fitting with 3/8-24 inlet port thread
- Brake pad installation hardware and copper crush washers included where applicable
Product Details
The BBB Industries Reman Caliper w/ Installation Hardware line focuses on remanufactured brake hydraulics built to restore proper caliper function with application-specific fitment. Part number 99-17963A uses a phenolic piston, a cast iron body, and a gray rust preventative coating to support consistent brake operation. The caliper includes a bracket, bleeder screw, slides, and dust boots, and it uses a banjo bolt inlet connection with M10-1.0 bleeder threads and a 3/8-24 inlet port thread. For shoppers comparing Ford Mustang and Ford Explorer brake caliper replacement options, 99-17963A is the exact part number to verify against the vehicle’s brake system requirements.
Common Problems This Part Can Address
- Brake fluid leakage from a worn caliper housing or seal area
- Uneven braking caused by sticking or seized caliper movement
- Soft or inconsistent brake pedal response from hydraulic caliper wear
- Brake drag related to damaged slides, boots, or piston components
- Corrosion on the caliper body affecting brake performance
Installation Notes and Tips
Confirm the vehicle’s brake configuration, mounting style, inlet fitting type, and piston size before installation. This caliper uses a banjo bolt inlet and 3/8-24 inlet port thread, so the brake line connection must match the original setup. Bleed the brake system after installation, inspect the pads and rotor condition, and verify smooth caliper slide movement before returning the vehicle to service. For Ford Mustang and Ford Explorer brake repairs, match the part number 99-17963A to the original caliper specification before ordering.
Quality Assurance
BBB Industries remanufactured brake hydraulics are built for application-specific replacement and inspected as part of the remanufacturing process. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||