/live/media/VI/VI_9918044A_Generic.jpg)
BBB Industries 99-18044A Disc Brake Caliper - Front Right
| Brand | BBB Industries 99-18044A |
|---|---|
| Position | Front Right |
| Pads Included | No |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Inlet Fitting Type | Banjo bolt |
| Caliper Color | Gray |
| Piston Material | Steel |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Size | M10-1.0 x 33 |
| Bleeder Screw Thread (mm) | M10-1.0 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | Yes |
| Caliper Finish | Rust preventative |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 5403, 791 |
| Inlet Port Thread Size (in) | 3/8-24 |
| Inlet Thread Size | 3/8-24 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Piston 1 Diameter (mm) | 54 |
| Piston Outside Diameter (in) | 2 |
| Piston Quantity | 2 |
| Wear Sensors Included | No |
| Product line | Reman Caliper w/ Installation Hardware |
| Fits | Ford · 5 vehicles |
Remanufactured caliper. Includes installation hardware for a ready-to-install replacement.
Cast iron construction. Provides durable braking performance with a rust-preventative finish.
Complete hardware set. Includes slides, bracket, bleeder screw, and dust boots.
Remanufactured Front Right Caliper for Ford Super Duty
BBB Industries 99-18044A is a remanufactured disc brake caliper for the front right position on select 1999-2000 Ford F-250 Super Duty, F-350 Super Duty, and 2000 Ford Excursion applications. It is built with a cast iron housing, steel pistons, and a gray rust-preventative finish for service replacement use.
The BBB Industries Reman Caliper w/ Installation Hardware line focuses on remanufactured brake hydraulics with application-specific hardware details. For this part, the caliper includes the bracket, caliper slides, bleeder screw, dust boots, and pad installation hardware, along with a banjo bolt and copper crush washers where applicable.
- Part number: 99-18044A
- Remanufactured disc brake caliper for front right installation
- Cast iron housing with steel pistons
- 54 mm piston diameter and dual-piston design
- Gray finish with rust preventative coating
- Banjo bolt inlet fitting with 3/8-24 inlet thread
- Bleeder screw included; M10-1.0 thread size
- Bracket included for the listed applications
- Caliper slides, dust boots, and hardware included
This BBB Industries brake caliper is built for direct replacement on the front right side of 1999 Ford F-250 Super Duty, 1999 Ford F-350 Super Duty, 2000 Ford Excursion, 2000 Ford F-250 Super Duty through 12/20/99, and 2000 Ford F-350 Super Duty. It is a remanufactured brake hydraulic component intended for vehicles using the specified bracket and inlet configuration, with housing cast numbers 5403 and 791 noted for identification. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Caliper Can Address
- Uneven front brake pad wear on the right side
- Brake drag caused by sticking caliper hardware or piston movement
- Brake fluid seepage at the caliper body or bleeder area
- Corrosion-related caliper seizure on older Ford Super Duty trucks
- Noisy or inconsistent braking from worn hydraulic components
Installation Notes
Verify front right fitment before installation, especially on 1999 Ford F-250 Super Duty and F-350 Super Duty applications where bracket compatibility is noted. Confirm the banjo bolt connection, 3/8-24 inlet thread, and M10-1.0 bleeder screw specification match the vehicle’s brake line and service setup. Inspect pads, rotors, and hoses during replacement to ensure the new caliper operates correctly.
Quality Assurance
BBB Industries remanufactures brake hydraulics with application-specific component details and service-ready hardware configurations. Part number 99-18044A is a remanufactured caliper assembly built for the listed Ford front right applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2000 | Ford | Excursion | Front Right | Supplied w/ Mounting Bracket; w/ Steel Piston; Reman Caliper w/ Installation Hardware |
| 2000 | Ford | F-250 Super Duty | Front Right | Supplied w/ Mounting Bracket; w/ Steel Piston; To 12/20/99; Reman Caliper w/ Installation Hardware |
| 2000 | Ford | F-350 Super Duty | Front Right | Supplied w/ Mounting Bracket; w/ Steel Piston; Reman Caliper w/ Installation Hardware |
| 1999 | Ford | F-250 Super Duty | Front Right | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| 1999 | Ford | F-350 Super Duty | Front Right | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| No rows match your filter. | ||||