BCBC 246S Engine Oil Pump Pickup Tube and Screen

Engine Oil Pump Pickup Tube and Screen

This Melling oil pump pickup tube and screen assembly is a standard replacement part for stock engine applications. It helps supply oil to the pump while screening out debris that can disrupt oil flow and pressure control. Part number 246S is made in the USA and cross-references Monroe Shocks & Struts (e.g., 55-HS, 224-1143H) for the same application.

Key Features

• Galvanized steel tube and screen construction for corrosion resistance in engine oil service
• Straight tube design with a 0.6 in. inside diameter and 1.17 in. tube length
• 2.92 in. screen face diameter for oil pickup coverage
• Standard replacement grade for stock engine builds
• No mounting hardware or gasket/seal included

Detailed Description

Part number 246S is an engine oil pump pickup tube and screen assembly used in Chevrolet and GMC truck, van, and SUV applications that require a stock-style oil pickup setup. It is built with galvanized steel for both the tube and screen, and the straight tube layout supports a direct replacement approach in compatible engine oiling systems. Melling recommends replacing the pickup tube and screen during oil pump service to help keep contaminants from affecting oil delivery and pressure regulation. This part fits 1982-1996 Chevrolet C10, C20, C30, K10, K20, K30, Blazer, Suburban, P20, P30, G20, G30, R10, R20, R30, V10, V20, V30, Tahoe, Express 2500, and Express 3500, as well as 1982-1996 GMC C1500, C2500, C3500, K1500, K2500, K3500, Jimmy, P2500, P3500, G2500, G3500, R1500, R2500, R3500, V1500, V2500, V3500, Savana 2500, Savana 3500, and Yukon, with stock notes where listed. Part number 246S is a practical choice for Chevrolet C1500 and GMC K2500 oil system service when a replacement pickup tube and screen is needed.

What It Is Used For

• Restoring oil pickup function when the original screen is restricted or damaged
• Reducing debris entry into the oil pump inlet
• Addressing oil flow issues caused by contamination in the lubrication system
• Supporting proper oil pressure control during pump service
• Replacing a worn pickup tube during engine rebuild or maintenance

Installation Notes and Tips

Install the pickup tube and screen as part of oil pump service and verify proper seating before engine start-up. Check the oiling system for contamination, wear debris, and any signs of restricted flow before reassembly. Because no mounting hardware or gasket/seal is included, confirm the required service parts are on hand before installation.

Quality Assurance

Melling identifies this assembly as made in the USA and recommends pickup tube and screen replacement during oil pump installation to help maintain proper lubrication system performance.