BCBC 384S Engine Oil Pump Pickup Tube and Screen

Engine Oil Pickup Tube Overview

This Melling engine oil pump pickup tube and screen assembly, part number 384S, is a standard replacement component for maintaining oil supply and filtration at the pickup point. It is built with galvanized steel construction and includes a gasket or seal for proper installation.

Compatible with 2003-2006 Kia Sorento, stock application, this pickup tube and screen helps keep debris out of the oil pump while supporting steady oil flow. The straight tube design, flanged end, and two-hole mounting pattern reflect a service-style replacement for the lubrication system.

Key Features

• Standard replacement pickup tube and screen assembly
• Galvanized steel tube and screen construction
• Straight tube design with flanged end
• Gasket or seal included
• Two mounting holes for installation alignment
• Part number 384S

Detailed Description

The Melling 384S pickup tube and screen assembly is used in the engine lubrication system to draw oil into the pump while screening out contaminants before they reach critical internal components. Melling notes that contamination from engine wear and extended oil change intervals can affect oil flow and pressure control, which is why a new pickup tube and screen is recommended during oil pump service. This part cross-references 26250-39850 for the same application.

For Kia Sorento oil pump service, part number 384S provides a direct service replacement format with a 6.35-inch tube length, 0.65-inch inside diameter, and 2.5-inch screen face diameter. The galvanized steel construction is suited to engine oil exposure, and the included gasket or seal supports proper sealing at installation.

What It Is Used For

• Restoring oil pickup flow when the original screen is restricted
• Replacing a worn or contaminated pickup tube during oil pump service
• Reducing debris entry into the oil pump inlet
• Addressing oil flow issues caused by sludge or internal engine wear
• Supporting proper lubrication system operation in the engine

Installation Notes and Tips

Install the pickup tube and screen as part of oil pump service and verify that the sealing surfaces are clean before assembly. The part is supplied without mounting hardware, so confirm the existing fasteners are serviceable before beginning installation. Follow the vehicle service procedure for torque and alignment requirements.

Quality Assurance

Melling recommends replacing the pickup tube and screen whenever an oil pump is installed. The 384S is a standard replacement part built for lubrication-system service and contamination control.