BCBC
Stock

BCBC M256S Engine Oil Pump

Brand BCBC M256S
Gear Material Steel
Width 3.07
Width 78.0
Height 141.0
Height 5.53
Grade Type Standard replacement
Gasket Or Seal Included No
Mounting Hole Quantity 1
Housing Material Cast iron
Drive Type Drive shaft
Oil Pump Type Gear
Pickup Tube Diameter 0.750
Pickup Tube Diameter 19.00
Drive Shaft Included No
Mounting Hole Diameter 0.25
Mounting Hole Diameter 6.0
Adjustable Bypass Pressure No
Alternate Pressure Springs Included No
Oil Pump Pressure Type Standard pressure
Oil Pump Volume Type Standard volume
Bolts Included No
Bushing Included No
Cotter Pin Included No
Cover Material Cast iron
Finish Rust preventative
Gears Included Yes
Governor Spinner Included No
Guide Included No
Inlet Size (in) 0.750
Inlet Size (mm) 19.00
Product line Stock
Fits Ford and Mazda · 47 vehicles

Standard replacement. Built for stock applications with consistent oil pressure and flow.

Steel gear design. Machined gears and cast iron construction support wear resistance.

Individually tested. Each pump is checked for pressure and flow before release.

Cross-references Sealed Power 224-43636S, 1F81-14-100 and 5L5Z-6600-AA for the same application. See all 13.

$125.30Free shipping
In stock · usually ships same day before 1pm CST
Step 1 — Confirm fitment
Free return shipping if it doesn't fit when you check fitment here first.
Select your vehicle to confirm fitment
Verify this part fits before purchasing β€” free returns if it doesn't
Step 2 — Quantity
Order total $125.30
Free shipping to the continental U.S.
Free returns within 60 days if it doesn't fit when fitment is verified.

Engine Oil Pump Overview

This Melling engine oil pump, part number M256S, is a standard replacement pump built for dependable oil pressure control. It is made in the USA and uses gear and gerotor technology to support efficient pump operation in stock applications.

Compatible with Ford Ranger, Mazda B3000, Ford F-100 Ranger, and Ford Aerostar applications listed below, this M256S oil pump is engineered for consistent pressure and flow. The cast iron housing, steel gears, and precision-ground end plates are selected for wear resistance and stable performance.

Key Features

  • Standard replacement engine oil pump for stock applications
  • Steel gears with cast iron housing and cover
  • Gear and gerotor design for efficient oil delivery
  • Precision-ground end plates for improved wear resistance
  • Individually tested for pressure and flow
  • Rust preventative finish for added surface protection

Detailed Description

Melling M256S is an engine oil pump designed for stock-style service where consistent oil pressure matters. The pump uses close-tolerance machined gears, a drive shaft design, and a standard pressure, standard volume configuration to help maintain proper engine lubrication under operating conditions. The included pickup screen and pump cover support a complete pump assembly, while the 0.750-inch inlet size and cast iron construction reflect a durable OE-style design.

This part cross-references Sealed Power 224-43636S for the same application. It is a practical choice for Ford Ranger and Mazda B3000 service work, as well as Ford F-100 Ranger and Ford Aerostar applications that call for M256S. The M256S part number is also useful when matching interchange references during engine repair.

What It Is Used For

  • Low oil pressure caused by a worn pump
  • Inconsistent oil delivery in a stock engine
  • Excessive wear in pump gears or housing
  • Oil circulation issues during engine service
  • Replacement during engine rebuild or maintenance

Installation Notes and Tips

Verify fitment by year, make, model, and application notes before installation. Confirm the pickup tube diameter, mounting hole size, and drive type match the original setup. Clean the mounting surface and inspect the oiling system for debris or wear before installing the new pump. The M256S should be installed with the correct engine-specific procedures and primed according to service requirements.

Quality Assurance

Melling manufactures this pump in the USA and tests each unit for pressure and flow under conditions that simulate engine operation. The M256S is built to production standards using quality materials and close-tolerance machining for consistent service performance.

This part fits 47 vehicles
Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
YearMakeModelLitersCylindersNotes
2008FordRanger3.0LV6Stock
2008MazdaB30003.0LV6Stock
2007FordRanger3.0LV6Stock
2007MazdaB30003.0LV6Stock
2006FordRanger3.0LV6Stock
2006MazdaB30003.0LV6Stock
2005FordRanger3.0LV6Stock
2005MazdaB30003.0LV6Stock
2004FordRanger3.0LV6Stock
2004MazdaB30003.0LV6Stock
2003FordRanger3.0LV6Stock
2003MazdaB30003.0LV6Stock
2002FordRanger3.0LV6Stock
2002MazdaB30003.0LV6Stock
2001FordF-100 Ranger3.0LV6Stock
2001FordRanger3.0LV6Stock
2001MazdaB30003.0LV6Stock
2000FordF-100 Ranger3.0LV6Stock
2000FordRanger3.0LV6Stock
2000MazdaB30003.0LV6Stock
1999FordF-100 Ranger3.0LV6Stock
1999FordRanger3.0LV6Stock
1999MazdaB30003.0LV6Stock
1998FordF-100 Ranger3.0LV6Stock
1998FordRanger3.0LV6Stock
1998MazdaB30003.0LV6Stock
1997FordAerostar3.0LV6Stock
1997FordF-100 Ranger3.0LV6Stock
1997FordRanger3.0LV6Stock
1997MazdaB30003.0LV6Stock
1996FordAerostar3.0LV6Stock
1996FordF-100 Ranger3.0LV6Stock
1996FordRanger3.0LV6Stock
1996MazdaB30003.0LV6Stock
1995FordAerostar3.0LV6Stock
1995FordRanger3.0LV6Stock
1995MazdaB30003.0LV6Stock
1994FordAerostar3.0LV6Stock
1994FordRanger3.0LV6Stock
1994MazdaB30003.0LV6Stock
1993FordAerostar3.0LV6Stock
1993FordRanger3.0LV6Stock
1992FordAerostar3.0LV6Stock
1992FordRanger3.0LV6Stock
1991FordAerostar3.0LV6Stock
1991FordRanger3.0LV6Stock
1990FordAerostar3.0LV6Stock
Directly replaces or cross-references 13 part numbers
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.
Sealed Power — 224-43636S1F81-14-1005L5Z-6600-AA224-43434S224-43497224-63636S601-2089EM-256SEP256SF77Z-6600-AAN/AOP4142PO25-M256