Beck Arnley 083-3375 Disc Brake Rotor - Front

Reliable Disc Brake Rotor for Toyota 4Runner and Pickup

The Beck Arnley 083-3375 disc brake rotor is designed specifically for Toyota 4Runner and Pickup models. Engineered as a solid, non-vented rotor, it provides consistent braking performance for vehicles requiring a 6-lug wheel setup with a 140 mm bolt pattern.

• Solid disc brake rotor, non-vented design
• 6 lug holes with 15 mm lug stud hole diameter
• 140 mm bolt pattern for precise fitment
• Rotor outer diameter of 302 mm and height of 48 mm
• Minimum thickness of 11.5 mm and surface thickness of 12.5 mm
• Center hole diameter of 100 mm for proper hub alignment
• Compatible with Toyota 4Runner and Pickup models

Technical Specifications and Design Details

This Beck Arnley disc brake rotor (part number 083-3375) features a solid construction without venting, suitable for applications where vented rotors are not required. The rotor measures 302 mm in outer diameter and 48 mm in height, with a rotor hub outer diameter of 182 mm and an inner diameter of 168.5 mm. The 6-lug configuration with a 140 mm bolt pattern and 15 mm lug stud hole diameter ensures compatibility with specific Toyota 4Runner and Pickup wheel assemblies. The rotor's minimum thickness is 11.5 mm, with a surface thickness of 12.5 mm, meeting OEM specifications for safe and reliable braking performance.

Applications and Problem Solving

• Replacement for worn or warped rotors on Toyota 4Runner and Pickup
• Addresses brake pulsation caused by uneven rotor surfaces
• Restores proper braking performance and pedal feel
• Suitable for vehicles requiring a solid, non-vented rotor design
• Compatible with 6-lug wheel setups with 140 mm bolt pattern

Installation Notes and Tips

Ensure the rotor surface is clean and free of debris before installation. Verify the bolt pattern and lug stud hole diameter match your vehicle specifications. It is recommended to replace brake pads simultaneously to maintain optimal braking performance. Check rotor thickness before installation to confirm it meets or exceeds the minimum thickness of 11.5 mm. Proper torque specifications should be followed when securing the rotor to the hub.

Quality Assurance and Warranty

Beck Arnley disc brake rotors are manufactured to meet or exceed OEM standards for fit, form, and function. While specific warranty details are not provided here, Beck Arnley products typically come with a limited warranty against defects in materials and workmanship. Refer to the product packaging or manufacturer documentation for complete warranty information.