Beck Arnley 083-3800 Disc Brake Rotor - Front

OE-Style Front Brake Rotor

The Beck Arnley 083-3800 is a premium vented disc brake rotor built for front axle applications on select Hyundai and Kia models. It is engineered as a direct replacement for OE fit, form, and function, with dimensions that match the original braking setup for a precise install.

Compatible with 2022-2026 Hyundai Ioniq 5 front, 2022-2026 Hyundai Tucson front, 2023-2025 Hyundai Ioniq 6 front, and select Kia EV6 and Sportage front applications, this rotor is a practical choice when you need a replacement that follows factory specifications.

• Part number: 083-3800
• Premium grade type for OE-style replacement needs
• Vented rotor design for front brake applications
• Smooth surface type
• Rotor outside diameter: 296 mm
• Rotor thickness: 26 mm
• Minimum thickness: 23.4 mm
• Rotor center bore inside diameter: 68 mm
• Hub outside diameter: 159 mm
• Bolt hole center to center length: 114 mm
• 5 lug hole design with 12.8 mm lug hole diameter
• Height: 44 mm

Detailed Fitment and Application

Beck Arnley 083-3800 is built for drivers replacing a front disc brake rotor on late-model Hyundai and Kia EV platforms. It matches the OE-style dimensions needed for proper rotor alignment and braking contact, including the vented construction, 5-lug pattern, and specified center bore and hub measurements.

This rotor fits 2022-2026 Hyundai Ioniq 5, front; 2022-2026 Hyundai Tucson, front; 2023-2025 Hyundai Ioniq 6, front; 2022-2024 Kia EV6, front; and 2023-2025 Kia Sportage, front. For Kia EV6 applications, notes include GT-Line, Light, Light Long Range, and Wind where listed.

What This Rotor Helps Address

• Front brake pulsation from a worn or uneven rotor surface
• Reduced braking consistency caused by rotor wear below service limits
• Noise or vibration related to rotor condition
• OE replacement needs after brake service on Hyundai Ioniq 5, Hyundai Tucson, Hyundai Ioniq 6, Kia EV6, or Kia Sportage
• Restoring factory-style brake geometry on vented front rotor applications

Installation Notes and Tips

Verify rotor thickness, minimum thickness, hub diameter, bolt pattern, and center bore before installation. Because this is a front vented rotor, confirm the vehicle’s brake package and trim-specific fitment, especially on Kia EV6 models with listed configuration notes. Inspect pads, caliper hardware, and hub condition during service to help ensure even rotor contact and proper braking performance.

Quality Assurance

Beck Arnley sources parts through a global network and specifies them to meet OE-style requirements for foreign nameplate applications. The 083-3800 is produced to support direct replacement use with attention to fit, function, and durability.