Beck Arnley 083-3825 Disc Brake Rotor - Front

OE-Style Front Brake Rotor for Lexus and Toyota

Beck Arnley 083-3825 is a premium front disc brake rotor built for direct replacement on select Lexus and Toyota applications. It is engineered around OE form, fit, and function, with a vented design and smooth surface finish for consistent braking performance.

Compatible with 2022-2025 Lexus NX250, 2022-2025 Lexus NX350, 2022-2025 Lexus NX350h, and 2025 Toyota Crown Signia, this rotor is a fitment-focused solution for front brake service. The Beck Arnley 083-3825 part number is also useful when cross-checking catalog listings for the same application.

Key Features

• Front disc brake rotor for select Lexus and Toyota vehicles
• Premium grade construction
• Vented rotor design for front axle use
• Smooth surface type
• Rotor outside diameter: 328 mm
• Rotor thickness: 28 mm
• Minimum thickness: 25 mm
• Rotor center bore inside diameter: 62 mm
• Bolt hole center to center length: 114 mm
• 5 lug hole quantity with 15.5 mm lug hole diameter

Detailed Description

Beck Arnley 083-3825 is designed as an OE replacement rotor for foreign nameplate vehicles, with attention to the dimensions and mounting details that matter during brake service. The vented rotor construction supports front brake applications, while the smooth friction surface provides a clean contact area for pad bedding and everyday stopping performance. Key measurements include a 328 mm outside diameter, 28 mm thickness, 25 mm minimum thickness, 49 mm height, and 62 mm center bore, helping ensure the part matches the original brake setup on the listed vehicles.

This rotor is a direct replacement choice for drivers servicing a Lexus NX250, Lexus NX350, Lexus NX350h, or Toyota Crown Signia front brake system. Beck Arnley sources parts through a global network and specifies them to meet OE-style requirements for form, fit, and function. Part number 083-3825 is the reference to use when verifying the correct front rotor for these applications.

What This Rotor Helps Address

• Brake pulsation caused by worn or uneven front rotors
• Reduced braking consistency from rotor wear below service limits
• Noise or vibration during front brake operation
• Service replacement for scored or heat-affected rotors
• OE-style front brake maintenance on listed Lexus and Toyota models

Installation Notes and Tips

Confirm rotor thickness and minimum thickness before installation, and inspect the hub and pad condition at the same time. Clean the hub mounting surface thoroughly so the rotor seats flat, and verify the 5-lug pattern and 114 mm bolt hole center-to-center length against the vehicle before assembly. For best results, replace or service brake pads as needed and follow the vehicle manufacturer’s brake service procedure.

Quality Assurance

Beck Arnley parts are specified for direct replacement use on foreign nameplate vehicles, with OE-quality expectations for fit and function. The brand’s sourcing and product standards are aimed at delivering a rotor that matches the listed application requirements for dependable front brake service.