Bilstein 24-001182 Suspension Shock Absorber - Rear

Bilstein B8 Performance Plus Shock Absorber

The Bilstein B8 Performance Plus shock absorber is a performance-focused OE replacement for vehicles running aftermarket lowering springs. Built with a monotube internal design and application-specific valve settings, it is engineered to sharpen handling response while maintaining the control expected from Bilstein suspension components. Part number 24-001182 is finished in Bilstein yellow paint and uses a blue straight boot.

B8 Performance Plus Series Details

The B8 Performance Plus line is Bilstein’s lowered-vehicle damper range, developed for drivers who want improved suspension control after lowering the ride height. This shock absorber uses a stem upper mount and an eye 10mm lower mount, making it a direct-fit suspension upgrade for the listed application. Bilstein Shock Absorbers in the B8 Performance Plus series are tested to meet or exceed OE standards for quality and consistency.

• Monotube internal design for consistent damping response
• Application-specific valve settings for lowered-suspension tuning
• Blue straight boot and yellow painted finish
• Stem upper mount and eye 10mm lower mount
• Part number 24-001182 for suspension service and upgrade work

Detailed Product Description

Bilstein 24-001182 is a B8 Performance Plus shock absorber built for vehicles equipped with aftermarket lowering springs. The monotube construction helps deliver controlled damping under spirited driving and everyday road use, while the valving is matched to the lowered suspension setup rather than a stock ride height. For drivers searching for a Bilstein shock absorber for lowered suspension, or a Bilstein B8 Performance Plus damper for a sportier street setup, this part provides a focused suspension solution. It is a strong choice for BMW 3 Series and BMW 5 Series applications where precise ride control and stable handling are priorities.

This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.

What This Shock Absorber Helps Address

• Excessive body motion after lowering springs are installed
• Soft or underdamped ride feel from OE-style shocks on lowered vehicles
• Reduced steering response during cornering and lane changes
• Loss of suspension control caused by mismatched damper and spring rates
• Uneven handling balance when upgrading to a sport suspension setup

Installation Notes and Tips

Install 24-001182 on the vehicle position specified by the application catalog and verify that the lowering springs, mounts, and suspension geometry match the intended setup. Because this damper is tuned for lowered ride height, it should be paired with aftermarket lowering springs rather than stock-height springs. Confirm the stem upper mount and eye 10mm lower mount before installation, and inspect related suspension components for wear at the same time.

Quality Assurance

Bilstein rigorously tests B8 Performance Plus dampers to meet or exceed OE standards. The 24-001182 shock absorber is built to Bilstein’s suspension quality expectations for consistent performance in lowered-spring applications.