Bilstein 24-302074 Suspension Shock Absorber - Front

Bilstein B6 4600 Front Shock for Ram 2500

The Bilstein B6 4600 is a direct-fit front shock absorber for stock-height Ram 2500 trucks. Built with a monotube design and a velocity-sensitive digressive piston, it delivers consistent damping response across changing road conditions. Part number 24-302074 is tuned for the specific front application on 2019-2025 Ram 2500 models.

Key Features

• Direct-fit replacement shock absorber for the front of 2019-2025 Ram 2500
• Monotube internal design for consistent fade-resistant performance
• Velocity-sensitive digressive piston for responsive damping
• Non-adjustable damping with application-specific tuning
• Smooth body, non-coilover construction
• 46mm body diameter with yellow painted finish
• Blue straight boot included
• Upper stem mount and lower eye mount, 14.4mm

Product Details

The Bilstein B6 4600 line is aimed at stock-height light trucks and SUVs that need a firmer, more controlled ride than worn OE shocks can provide. For Ram 2500 front suspension service, part number 24-302074 uses Bilstein’s monotube architecture to maintain stable damping under repeated compression and rebound cycles. The tuned valving helps improve ride control, steering response, and comfort without requiring adjustment.

This part cross-references Monroe Shocks & Struts (e.g., 68443166AB) for the same application.

What It Helps Address

• Excessive front-end bounce after bumps
• Nose dive during braking
• Loose or unsettled steering feel
• Reduced ride control from worn factory shocks
• Harshness and inconsistency over changing pavement

Installation Notes

Compatible With 2019-2025 Ram 2500, front. Verify upper stem and lower eye mounting points before installation, and confirm the shock matches the stock-height suspension configuration. Part number 24-302074 is a front shock absorber, so it should be installed in the correct axle position and side-specific orientation if required by the vehicle setup.

Quality Assurance

Bilstein engineers the B6 4600 series as an application-specific shock absorber line for light trucks and SUVs. The 46mm monotube design and tuned valving are selected to deliver consistent performance for the listed Ram 2500 front fitment.