OE Quality
60-Day Returns

Bosal 093-2013 Catalytic Converter
Bosal BRExhaust Universal Catalytic Converter
The Bosal BRExhaust Federal Universal Standard Load OBDII Catalytic Converter, part number 093-2013, is built for Federal/EPA emissions applications that require a weld-in universal converter. Its stainless steel construction is made for corrosion resistance and long service life, while the OBDII-focused design helps keep the check engine light off when installed on the correct vehicle application.
Compatible With a wide range of vehicles including Toyota Yaris, Honda Civic, Hyundai Elantra, Audi A4 Quattro, and Jeep Grand Cherokee applications, this converter is a practical choice for emissions-related exhaust repair. The 093-2013 part number is also listed across many rear, front, left, and right positions depending on the vehicle.
Key Features
- Federal/EPA compliant universal catalytic converter
- Stainless steel body for corrosion resistance
- Clam shell body type
- Weld-on inlet and outlet attachments
- One catalytic converter included
- OBDII-oriented design for emissions system service
- Professional cutting and welding installation required
Product Line Details
BRExhaust Federal Universal Standard Load OBDII Catalytic Converter units are engineered for vehicles that follow Federal OBDII EPA standards. This product line focuses on emissions compliance and reliable exhaust system function in universal, weld-in applications where exact vehicle-specific fitment is not used.
Detailed Description
Bosal 093-2013 is a universal catalytic converter for Federal emissions applications that need a stainless steel, weld-in replacement. It is listed for a broad range of vehicles from 1995 through 2015, including many Honda Civic, Toyota Prius, and Hyundai Sonata applications, along with select Audi, BMW, Cadillac, Dodge, Ford, Jaguar, Mercedes-Benz, Nissan, Scion, Suzuki, Volkswagen, and other models. Because fitment varies by year, model, and position, the exact application should be matched before installation.
This part cross-references no listed interchange numbers in the provided data.
What It Helps Address
- Failed or restricted catalytic converter replacement
- Check engine light concerns tied to catalyst efficiency
- Emissions test failures on Federal OBDII EPA vehicles
- Rust or corrosion damage in the exhaust section
- Need for a weld-in universal converter on supported applications
Installation Notes and Tips
- Cutting and welding are required during installation.
- Professional installation is highly recommended.
- No mounting hardware, clamps, gaskets, or hangers are included.
- Verify the exact year, make, model, and position before ordering.
- Some applications include emissions-specific notes, such as Federal emissions equipped or California emissions equipped vehicles registered outside California.
Quality Assurance
Built by Bosal with stainless steel construction and an emissions-focused OBDII design, this converter is intended for reliable service in Federal/EPA applications. The product information provided does not list a warranty.
Fitment
- Fits 2007-2015 Toyota Yaris, N/A
- Fits 2009-2012 Honda Ridgeline, N/A
- Fits 2006-2010 Hyundai Elantra, N/A
- Fits 1996-1998 Hyundai Elantra, N/A
- Fits 2005-2010 Kia Sportage, N/A
- Fits 2006-2009 Audi A3 Quattro, N/A
- Fits 2005-2009 Audi A4 Quattro, N/A
- Fits 2004-2009 Audi S4, rear right
- Fits 2004-2009 Audi S4, rear left
- Fits 2005-2009 Jaguar Super V8, right
- Fits 2005-2009 Jaguar Super V8, left
- Fits 2004-2009 Jaguar Vanden Plas, left
- Fits 2004-2009 Jaguar Vanden Plas, right
- Fits 2004-2009 Jaguar XJ8, right
- Fits 2004-2009 Jaguar XJ8, left
- Fits 2004-2009 Jaguar XJR, left
- Fits 2004-2009 Jaguar XJR, right
- Fits 2009 Scion tC, rear
- Fits 2005-2006 Scion tC, rear
- Fits 2004-2009 Toyota Prius, rear
- Fits 2005-2008 Audi A4, N/A
- Fits 2005-2008 Hyundai Tucson, N/A
- Fits 2006-2007 BMW 530i, rear right
- Fits 2006-2007 BMW 530i, rear left
- Fits 2006-2007 BMW 530xi, rear right
- Fits 2006-2007 BMW 530xi, rear left
- Fits 2004-2007 Cadillac CTS, left
- Fits 2004-2007 Cadillac CTS, right
- Fits 2005-2007 Cadillac STS, left
- Fits 2005-2007 Cadillac STS, right
- Fits 2007 Chrysler Aspen, N/A
- Fits 2005-2007 Dodge Durango, N/A
- Fits 2003-2007 Honda Civic, N/A
- Fits 1996-1998 Honda Civic, N/A
- Fits 2006-2007 Hyundai Sonata, N/A
- Fits 1999-2001 Hyundai Sonata, N/A
- Fits 2007 Scion tC, N/A
- Fits 2000-2006 Audi TT Quattro, left
- Fits 2000-2006 Audi TT Quattro, right
- Fits 2004-2006 Dodge Dakota, N/A
- Fits 2001-2006 Ford Ranger, front
- Fits 2005-2006 Jeep Grand Cherokee, N/A
- Fits 2004-2006 Mazda B3000, front
- Fits 2004-2006 Mazda B4000, front
- Fits 2004-2006 Volkswagen Phaeton, rear right
- Fits 2004-2006 Volkswagen Phaeton, rear left
- Fits 2004-2005 Chevrolet Cavalier, rear
- Fits 2004-2005 Chevrolet Classic, rear
- Fits 2004-2005 Chevrolet Malibu, rear
- Fits 2000-2005 Jaguar S-Type, right
- Fits 2000-2005 Jaguar S-Type, left
- Fits 2004-2005 Pontiac Grand Am, rear
- Fits 2004-2005 Pontiac Sunfire, rear
- Fits 2001-2005 Saturn L300, front
- Fits 1999-2005 Suzuki Grand Vitara, rear
- Fits 2000-2005 Volkswagen Passat, rear right
- Fits 2000-2005 Volkswagen Passat, rear left
- Fits 2005 Volkswagen Touareg, front
- Fits 2004 Chevrolet Malibu, front right
- Fits 2004 Chevrolet Malibu, front left
- Fits 2004 Dodge Durango, left
- Fits 2001-2004 Hyundai Santa Fe, N/A
- Fits 2004 Jeep Grand Cherokee, left
- Fits 1999-2004 Jeep Grand Cherokee, front
- Fits 2004 Oldsmobile Alero, rear
- Fits 2003-2004 Saturn Ion, N/A
- Fits 2003-2004 Toyota 4Runner, left
- Fits 2003-2004 Toyota 4Runner, right
- Fits 2000-2004 Toyota Avalon, front
- Fits 2004 Volkswagen R32, left
- Fits 2004 Volkswagen R32, right
- Fits 2002-2003 Audi S6, left
- Fits 2002-2003 Audi S6, right
- Fits 1996-2003 Chevrolet Cavalier, N/A
- Fits 1999-2003 Chevrolet Tracker, rear
- Fits 2002-2003 Jeep Grand Cherokee, front
- Fits 2002-2003 Jeep Grand Cherokee, left
- Fits 2001-2003 Jeep Wrangler, front
- Fits 2003 Mercedes-Benz CL600, left
- Fits 2003 Mercedes-Benz CL600, right
- Fits 1998-2003 Mercedes-Benz E320, right
- Fits 1998-2003 Mercedes-Benz E320, left
- Fits 2003 Mercedes-Benz S600, left
- Fits 1999-2003 Oldsmobile Alero, N/A
- Fits 2000-2003 Pontiac Grand Am, N/A
- Fits 1996-1998 Pontiac Grand Am, N/A
- Fits 1996-2003 Pontiac Sunfire, N/A
- Fits 2001-2003 Saturn L200, N/A
- Fits 2001-2003 Saturn LW200, N/A
- Fits 2001-2003 Saturn LW300, front
- Fits 2001-2003 Suzuki Vitara, rear
- Fits 2002-2003 Suzuki XL-7, N/A
- Fits 2001-2003 Toyota Sienna, front
- Fits 1998-2002 Chevrolet Prizm, N/A
- Fits 2001-2002 Kia Rio, N/A
- Fits 1999-2002 Mercedes-Benz ML320, right
- Fits 1999-2002 Mercedes-Benz ML320, left
- Fits 1999-2002 Mercedes-Benz ML320, front
- Fits 1999-2002 Mercedes-Benz ML320, rear
- Fits 2001-2002 Saturn L100, N/A
- Fits 1996-2002 Toyota Corolla, N/A
- Fits 2000-2001 Audi A6, front left
- Fits 2000-2001 Audi A6, front right
- Fits 1997-2001 Honda CR-V, N/A
- Fits 2001 Kia Optima, N/A
- Fits 1999-2001 Lexus ES300, N/A
- Fits 1999-2001 Mazda Protege, rear
- Fits 1999-2001 Mercedes-Benz ML430, right
- Fits 1999-2001 Mercedes-Benz ML430, left
- Fits 2001 Toyota Solara, rear
- Fits 1998-2000 Chevrolet Metro, N/A
- Fits 1997-2000 Chrysler Sebring, N/A
- Fits 1996-2000 Dodge Avenger, N/A
- Fits 1998-2000 INFINITI QX4, rear left
- Fits 1998-2000 INFINITI QX4, rear right
- Fits 1998-2000 INFINITI QX4, right
- Fits 1998-2000 INFINITI QX4, left
- Fits 2000 Saturn LS, N/A
- Fits 2000 Saturn LS1, N/A
- Fits 2000 Saturn LS2, front
- Fits 2000 Saturn LW2, front
- Fits 1999-2000 Suzuki Vitara, rear
- Fits 1999-2000 Suzuki Vitara, N/A
- Fits 1996-2000 Toyota Tacoma, N/A
- Fits 2000 Volvo S70, N/A
- Fits 1997-1999 Acura CL, N/A
- Fits 1996-1999 Acura Integra, N/A
- Fits 1996-1999 Audi A4, left
- Fits 1996-1999 Audi A4, right
- Fits 1996-1999 Audi A4 Quattro, left
- Fits 1996-1999 Audi A4 Quattro, right
- Fits 1995-1999 Audi A6, left
- Fits 1995-1999 Audi A6, right
- Fits 1995-1999 Audi A6 Quattro, left
- Fits 1995-1999 Audi A6 Quattro, right
- Fits 1997-1999 Audi A8, right
- Fits 1997-1999 Audi A8, left
- Fits 1997-1999 Chevrolet Malibu, N/A
- Fits 1996-1999 Ford Taurus, front
- Fits 1997-1999 Hyundai Tiburon, N/A
- Fits 1999 Jeep Cherokee, N/A
- Fits 1996-1999 Mercury Sable, front
- Fits 1999 Pontiac Grand Am, N/A
- Fits 1995-1999 Toyota Celica, rear
- Fits 1995-1998 Acura TL, N/A
- Fits 1997-1998 BMW 528i, left
- Fits 1997-1998 BMW 528i, right
- Fits 1997-1998 BMW 540i, left
- Fits 1997-1998 BMW 540i, right
- Fits 1997-1998 BMW 740i, left
- Fits 1997-1998 BMW 740i, right
- Fits 1996-1998 BMW 740iL, left
- Fits 1996-1998 BMW 740iL, right
- Fits 1996-1998 Ford Mustang, left center
- Fits 1996-1998 Ford Mustang, right center
- Fits 1996-1998 Lincoln Mark VIII, N/A
- Fits 1997-1998 Mercedes-Benz C230, N/A
- Fits 1996-1998 Mercury Villager, rear
- Fits 1995-1998 Nissan 240SX, front
- Fits 1996-1998 Nissan Quest, rear
- Fits 1996-1997 Chrysler Concorde, front left
- Fits 1996-1997 Chrysler Concorde, front right
- Fits 1996-1997 Chrysler LHS, front left
- Fits 1996-1997 Chrysler LHS, front right
- Fits 1996-1997 Dodge Intrepid, front left
- Fits 1996-1997 Dodge Intrepid, front right
- Fits 1995-1997 Geo Metro, N/A
- Fits 1995-1997 Geo Metro, front
- Fits 1996-1997 Geo Prizm, N/A
- Fits 1996-1997 Honda Accord, N/A
- Fits 1996-1997 Honda Civic del Sol, N/A
- Fits 1996-1997 Honda Odyssey, N/A
- Fits 1997 Hyundai Accent, rear
- Fits 1997 Hyundai Tiburon, N/A
- Fits 1996-1997 Kia Sephia, rear
- Fits 1996-1997 Kia Sephia, N/A
- Fits 1996-1997 Oldsmobile Achieva, N/A
- Fits 1996-1997 Saab 900, left
- Fits 1996-1997 Toyota Celica, N/A
- Fits 1996 Chevrolet Corsica, N/A
- Fits 1996 Chrysler New Yorker, front left
- Fits 1996 Chrysler New Yorker, front right
- Fits 1996 Ford Escort, N/A
- Fits 1996 Hyundai Accent, rear
- Fits 1996 Hyundai Accent, N/A
- Fits 1995-1996 Mercedes-Benz C220, rear left
- Fits 1995-1996 Mercedes-Benz C220, rear right
- Fits 1996 Mercedes-Benz S320, N/A
- Fits 1996 Mercury Tracer, N/A
- Fits 1995-1996 Mitsubishi Mighty Max, N/A
- Fits 1996 Toyota Camry, rear
- Fits 1995 Hyundai Accent, rear
| Brand | Bosal |
| Part Number | 093-2013 |
| Position | BRExhaust Federal Universal Standard Load OBDII Catalytic Converter, Right, Left, Front Left, Rear Left, Rear Right, Rear, Front Right, Left Center, Right Center, and Front |
| Mounting Hardware Included | No |
| Body Type | Clam shell |
| Clamp Included | No |
| Converter Quantity | 1 |
| Gasket Included | No |
| Hangers Included | No |
| Inlet Attachment | Weld-on |
| Material | Stainless steel |
| Outlet Attachment | Weld-on |
| Title | Brexhaust standard load federal / epa compliant universal catalyt |
This part fits 705 vehicles. Search below:
| Year | Make | Model | Submodel | Body Type | Drive Type | Transmission | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|---|---|---|
| 2015 | Toyota | Yaris | 1.5L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2014 | Toyota | Yaris | 1.5L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2013 | Toyota | Yaris | 1.5L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2012 | Honda | Ridgeline | 3.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2012 | Toyota | Yaris | 1.5L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2011 | Honda | Ridgeline | 3.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2011 | Toyota | Yaris | 1.5L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2010 | Honda | Ridgeline | 3.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2010 | Hyundai | Elantra | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2010 | Kia | Sportage | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2010 | Toyota | Yaris | 1.5L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2009 | Audi | A3 Quattro | 3.2L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2009 | Audi | A4 Quattro | Cabriolet | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 2009 | Audi | S4 | 4.2L | V8 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2009 | Audi | S4 | 4.2L | V8 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2009 | Honda | Ridgeline | 3.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2009 | Hyundai | Elantra | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2009 | Jaguar | Super V8 | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2009 | Jaguar | Super V8 | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2009 | Jaguar | Vanden Plas | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2009 | Jaguar | Vanden Plas | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2009 | Jaguar | XJ8 | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2009 | Jaguar | XJ8 | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2009 | Jaguar | XJR | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2009 | Jaguar | XJR | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2009 | Kia | Sportage | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2009 | Scion | tC | 2.4L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2009 | Toyota | Prius | 1.5L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2009 | Toyota | Yaris | 1.5L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2008 | Audi | A3 Quattro | 3.2L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2008 | Audi | A4 | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2008 | Audi | A4 Quattro | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2008 | Audi | S4 | 4.2L | V8 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2008 | Audi | S4 | 4.2L | V8 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2008 | Hyundai | Elantra | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2008 | Hyundai | Tucson | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2008 | Jaguar | Super V8 | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2008 | Jaguar | Super V8 | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2008 | Jaguar | Vanden Plas | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2008 | Jaguar | Vanden Plas | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2008 | Jaguar | XJ8 | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2008 | Jaguar | XJ8 | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2008 | Jaguar | XJR | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2008 | Jaguar | XJR | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2008 | Kia | Sportage | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2008 | Toyota | Prius | 1.5L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2008 | Toyota | Yaris | 1.5L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Audi | A3 Quattro | 3.2L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Audi | A4 | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Audi | A4 Quattro | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Audi | S4 | 4.2L | V8 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Audi | S4 | 4.2L | V8 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | BMW | 530i | 3.0L | L6 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | BMW | 530i | 3.0L | L6 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | BMW | 530xi | 3.0L | L6 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | BMW | 530xi | 3.0L | L6 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Cadillac | CTS | 3.6L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Cadillac | CTS | 3.6L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Cadillac | CTS | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Cadillac | CTS | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Cadillac | STS | 3.6L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Cadillac | STS | 3.6L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Chrysler | Aspen | 4.7L | V8 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Dodge | Durango | 4.7L | V8 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Honda | Civic | 1.3L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Hyundai | Elantra | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Hyundai | Sonata | 3.3L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Hyundai | Tucson | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Jaguar | Super V8 | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Jaguar | Super V8 | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Jaguar | Vanden Plas | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Jaguar | Vanden Plas | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Jaguar | XJ8 | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Jaguar | XJ8 | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Jaguar | XJR | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Jaguar | XJR | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Kia | Sportage | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Scion | tC | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Toyota | Prius | 1.5L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2007 | Toyota | Yaris | 1.5L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Audi | A3 Quattro | 3.2L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Audi | A4 | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Audi | A4 Quattro | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Audi | S4 | 4.2L | V8 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Audi | S4 | 4.2L | V8 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Audi | TT Quattro | 1.8L | L4 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Audi | TT Quattro | 3.2L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Audi | TT Quattro | 1.8L | L4 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Audi | TT Quattro | 3.2L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | BMW | 530i | 3.0L | L6 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | BMW | 530i | 3.0L | L6 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | BMW | 530xi | 3.0L | L6 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | BMW | 530xi | 3.0L | L6 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Cadillac | CTS | 3.6L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Cadillac | CTS | 3.6L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Cadillac | CTS | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Cadillac | CTS | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Cadillac | STS | 3.6L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Cadillac | STS | 3.6L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Dodge | Dakota | 3.7L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Dodge | Durango | 4.7L | V8 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Dodge | Durango | 3.7L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Ford | Ranger | 4.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Ford | Ranger | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Honda | Civic | 1.3L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Hyundai | Elantra | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Hyundai | Sonata | 3.3L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Hyundai | Tucson | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Jaguar | Super V8 | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Jaguar | Super V8 | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Jaguar | Vanden Plas | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Jaguar | Vanden Plas | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Jaguar | XJ8 | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Jaguar | XJ8 | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Jaguar | XJR | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Jaguar | XJR | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Jeep | Grand Cherokee | 3.7L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Kia | Sportage | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Mazda | B3000 | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Mazda | B4000 | 4.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Scion | tC | 2.4L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Toyota | Prius | 1.5L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Volkswagen | Phaeton | 4.2L | V8 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2006 | Volkswagen | Phaeton | 4.2L | V8 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Audi | A4 | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Audi | A4 Quattro | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Audi | S4 | 4.2L | V8 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Audi | S4 | 4.2L | V8 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Audi | TT Quattro | 1.8L | L4 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Audi | TT Quattro | 3.2L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Audi | TT Quattro | 1.8L | L4 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Audi | TT Quattro | 3.2L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Cadillac | CTS | 3.6L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Cadillac | CTS | 3.6L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Cadillac | CTS | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Cadillac | CTS | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Cadillac | STS | 3.6L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Cadillac | STS | 3.6L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Chevrolet | Cavalier | 2.2L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Chevrolet | Classic | 2.2L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Chevrolet | Malibu | 2.2L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Dodge | Dakota | 3.7L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Dodge | Durango | 4.7L | V8 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Dodge | Durango | 3.7L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Ford | Ranger | 4.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Ford | Ranger | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Honda | Civic | 1.3L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Hyundai | Tucson | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Jaguar | S-Type | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Jaguar | S-Type | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Jaguar | S-Type | 3.0L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Jaguar | S-Type | 3.0L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Jaguar | Super V8 | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Jaguar | Super V8 | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Jaguar | Vanden Plas | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Jaguar | Vanden Plas | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Jaguar | XJ8 | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Jaguar | XJ8 | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Jaguar | XJR | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Jaguar | XJR | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Jeep | Grand Cherokee | 3.7L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Kia | Sportage | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Mazda | B3000 | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Mazda | B4000 | 4.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Pontiac | Grand Am | 2.2L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Pontiac | Sunfire | 2.2L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Saturn | L300 | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Scion | tC | 2.4L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Suzuki | Grand Vitara | 2.5L | V6 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Toyota | Prius | 1.5L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Volkswagen | Passat | 2.8L | V6 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Volkswagen | Passat | 2.8L | V6 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Volkswagen | Phaeton | 4.2L | V8 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Volkswagen | Phaeton | 4.2L | V8 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2005 | Volkswagen | Touareg | 3.2L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Audi | S4 | 4.2L | V8 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Audi | S4 | 4.2L | V8 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Audi | TT Quattro | 1.8L | L4 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Audi | TT Quattro | 3.2L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Audi | TT Quattro | 1.8L | L4 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Audi | TT Quattro | 3.2L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Cadillac | CTS | 3.6L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Cadillac | CTS | 3.6L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Chevrolet | Cavalier | 2.2L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Chevrolet | Classic | 2.2L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Chevrolet | Malibu | 2.2L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Chevrolet | Malibu | 3.5L | V6 | Front Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Chevrolet | Malibu | 3.5L | V6 | Front Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Dodge | Dakota | 4WD | 4.7L | V8 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 2004 | Dodge | Dakota | RWD | 4.7L | V8 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 2004 | Dodge | Dakota | 3.7L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Dodge | Durango | 4.7L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Ford | Ranger | 4.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Ford | Ranger | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Honda | Civic | 1.3L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Hyundai | Santa Fe | 2.7L | V6 | N/A | Federal Emissions Equipped; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Jaguar | S-Type | 3.0L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Jaguar | S-Type | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Jaguar | S-Type | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Jaguar | S-Type | 3.0L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Jaguar | Vanden Plas | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Jaguar | Vanden Plas | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Jaguar | XJ8 | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Jaguar | XJ8 | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Jaguar | XJR | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Jaguar | XJR | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Jeep | Grand Cherokee | 4.7L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Jeep | Grand Cherokee | 4.0L | L6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Mazda | B3000 | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Mazda | B4000 | 4.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Oldsmobile | Alero | 2.2L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Pontiac | Grand Am | 2.2L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Pontiac | Sunfire | 2.2L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Saturn | Ion | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Saturn | Ion | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Saturn | L300 | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Suzuki | Grand Vitara | 2.5L | V6 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Toyota | 4Runner | 4.0L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Toyota | 4Runner | 4.0L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Toyota | Avalon | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Toyota | Prius | 1.5L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Volkswagen | Passat | 2.8L | V6 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Volkswagen | Passat | 2.8L | V6 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Volkswagen | Phaeton | 4.2L | V8 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Volkswagen | Phaeton | 4.2L | V8 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Volkswagen | R32 | 3.2L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2004 | Volkswagen | R32 | 3.2L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Audi | S6 | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Audi | S6 | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Audi | TT Quattro | 1.8L | L4 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Audi | TT Quattro | 1.8L | L4 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Chevrolet | Cavalier | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Chevrolet | Tracker | 2.0L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Ford | Ranger | 4.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Honda | Civic | 1.3L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Hyundai | Santa Fe | 2.7L | V6 | N/A | Federal Emissions Equipped; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Jaguar | S-Type | 3.0L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Jaguar | S-Type | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Jaguar | S-Type | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Jaguar | S-Type | 3.0L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Jeep | Grand Cherokee | 4.7L | V8 | Front | Cutting and Welding Required During Installation; Split Date To: To 5/2/2003; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Jeep | Grand Cherokee | 4.7L | V8 | Left | Cutting and Welding Required During Installation; Split Date To: To 5/2/2003; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Jeep | Grand Cherokee | 4.0L | L6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Jeep | Wrangler | 4.0L | L6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Mercedes-Benz | CL600 | 5.5L | V12 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Mercedes-Benz | CL600 | 5.5L | V12 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Mercedes-Benz | E320 | 3.2L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Mercedes-Benz | E320 | 3.2L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Mercedes-Benz | S600 | 5.5L | V12 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Oldsmobile | Alero | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Pontiac | Grand Am | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Pontiac | Sunfire | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Saturn | Ion | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Saturn | L200 | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Saturn | L300 | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Saturn | LW200 | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Saturn | LW300 | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Suzuki | Grand Vitara | 2.5L | V6 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Suzuki | Vitara | 2.0L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Suzuki | XL-7 | 2.7L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Toyota | 4Runner | 4.0L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Toyota | 4Runner | 4.0L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Toyota | Avalon | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Toyota | Sienna | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Volkswagen | Passat | 2.8L | V6 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2003 | Volkswagen | Passat | 2.8L | V6 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Audi | S6 | 4.2L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Audi | S6 | 4.2L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Audi | TT Quattro | 1.8L | L4 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Audi | TT Quattro | 1.8L | L4 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Chevrolet | Cavalier | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Chevrolet | Cavalier | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Chevrolet | Prizm | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Chevrolet | Tracker | 2.0L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Chevrolet | Tracker | 1.6L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Ford | Ranger | 4.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Hyundai | Santa Fe | 2.7L | V6 | N/A | Federal Emissions Equipped; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Jaguar | S-Type | 3.0L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Jaguar | S-Type | 3.0L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Jeep | Grand Cherokee | 4.7L | V8 | Front | Cutting and Welding Required During Installation; Split Date To: To 5/2/2003; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Jeep | Grand Cherokee | 4.7L | V8 | Left | Cutting and Welding Required During Installation; Split Date To: To 5/2/2003; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Jeep | Grand Cherokee | 4.0L | L6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Jeep | Wrangler | 4.0L | L6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Kia | Rio | 1.5L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Mercedes-Benz | E320 | 4Matic | 3.2L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 2002 | Mercedes-Benz | E320 | 4Matic | 3.2L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 2002 | Mercedes-Benz | ML320 | 3.2L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Mercedes-Benz | ML320 | 3.2L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Mercedes-Benz | ML320 | 3.2L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Mercedes-Benz | ML320 | 3.2L | V6 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Oldsmobile | Alero | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Pontiac | Grand Am | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Pontiac | Sunfire | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Pontiac | Sunfire | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Saturn | L100 | Automatic | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 2002 | Saturn | L200 | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Saturn | L300 | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Saturn | LW200 | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Saturn | LW300 | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Suzuki | Grand Vitara | 2.5L | V6 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Suzuki | Vitara | 2.0L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Suzuki | XL-7 | 2.7L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Toyota | Avalon | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Toyota | Corolla | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Toyota | Sienna | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Volkswagen | Passat | 2.8L | V6 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2002 | Volkswagen | Passat | 2.8L | V6 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Audi | A6 | 2.8L | V6 | Front Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Audi | A6 | 2.8L | V6 | Front Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Audi | TT Quattro | 1.8L | L4 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Audi | TT Quattro | 1.8L | L4 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Chevrolet | Cavalier | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Chevrolet | Cavalier | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Chevrolet | Prizm | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Chevrolet | Tracker | 2.0L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Chevrolet | Tracker | 1.6L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Ford | Ranger | 4.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Honda | CR-V | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Hyundai | Santa Fe | 2.7L | V6 | N/A | Federal Emissions Equipped; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Hyundai | Sonata | 2.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Jaguar | S-Type | 3.0L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Jaguar | S-Type | 3.0L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Jeep | Grand Cherokee | 4.0L | L6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Jeep | Wrangler | 4.0L | L6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Kia | Optima | 2.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Kia | Rio | 1.5L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Lexus | ES300 | 3.0L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Mazda | Protege | 1.6L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Mercedes-Benz | E320 | 4Matic | 3.2L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 2001 | Mercedes-Benz | E320 | 4Matic | 3.2L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 2001 | Mercedes-Benz | ML320 | 3.2L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Mercedes-Benz | ML320 | 3.2L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Mercedes-Benz | ML320 | 3.2L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Mercedes-Benz | ML320 | 3.2L | V6 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Mercedes-Benz | ML430 | 4.3L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Mercedes-Benz | ML430 | 4.3L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Oldsmobile | Alero | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Pontiac | Grand Am | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Pontiac | Sunfire | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Pontiac | Sunfire | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Saturn | L100 | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Saturn | L200 | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Saturn | L300 | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Saturn | LW200 | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Saturn | LW300 | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Suzuki | Grand Vitara | 2.5L | V6 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Suzuki | Vitara | 1.6L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Suzuki | Vitara | 2.0L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Toyota | Avalon | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Toyota | Corolla | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Toyota | Sienna | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Toyota | Solara | 2.2L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Volkswagen | Passat | 2.8L | V6 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2001 | Volkswagen | Passat | 2.8L | V6 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Audi | A6 | 2.8L | V6 | Front Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Audi | A6 | 2.8L | V6 | Front Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Audi | TT Quattro | 1.8L | L4 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Audi | TT Quattro | 1.8L | L4 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Chevrolet | Cavalier | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Chevrolet | Cavalier | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Chevrolet | Metro | 1.0L | L3 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Chevrolet | Prizm | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Chevrolet | Tracker | 1.6L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Chevrolet | Tracker | 2.0L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Chrysler | Sebring | Coupe | 2.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 2000 | Dodge | Avenger | 2.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Honda | CR-V | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Hyundai | Sonata | 2.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | INFINITI | QX4 | 3.3L | V6 | Rear Left | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | INFINITI | QX4 | 3.3L | V6 | Rear Right | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Jaguar | S-Type | 3.0L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Jaguar | S-Type | 3.0L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Jeep | Grand Cherokee | 4.0L | L6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Jeep | Wrangler | 4.0L | L6 | Front | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Lexus | ES300 | 3.0L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Mazda | Millenia | 2.3L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Mazda | Protege | 1.6L | L4 | Rear | Cutting and Welding Required During Installation; California Emissions Equipped Vehicles Registered Outside Of California; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Mazda | Protege | 1.8L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Mercedes-Benz | C230 | 2.3L | L4 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Mercedes-Benz | C230 | 2.3L | L4 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Mercedes-Benz | E320 | 4Matic | 3.2L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 2000 | Mercedes-Benz | E320 | 4Matic | 3.2L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 2000 | Mercedes-Benz | ML320 | 3.2L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Mercedes-Benz | ML320 | 3.2L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Mercedes-Benz | ML320 | 3.2L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Mercedes-Benz | ML320 | 3.2L | V6 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Mercedes-Benz | ML430 | 4.3L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Mercedes-Benz | ML430 | 4.3L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Mercedes-Benz | SLK230 | 2.3L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Nissan | Pathfinder | 3.3L | V6 | Rear Left | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Nissan | Pathfinder | 3.3L | V6 | Rear Right | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Nissan | Pathfinder | 3.3L | V6 | Right | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Nissan | Pathfinder | 3.3L | V6 | Left | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Oldsmobile | Alero | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Pontiac | Grand Am | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Pontiac | Sunfire | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Pontiac | Sunfire | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Saturn | LS | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Saturn | LS1 | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Saturn | LS2 | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Saturn | LW2 | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Suzuki | Grand Vitara | 2.5L | V6 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Suzuki | Vitara | 1.6L | L4 | Rear | Cutting and Welding Required During Installation; California Emissions Equipped Vehicles Registered Outside Of California; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Suzuki | Vitara | 2.0L | L4 | Rear | Cutting and Welding Required During Installation; California Emissions Equipped Vehicles Registered Outside Of California; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Suzuki | Vitara | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; Federal Emissions Equipped; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Suzuki | Vitara | 1.6L | L4 | N/A | Cutting and Welding Required During Installation; Federal Emissions Equipped; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Toyota | Avalon | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Toyota | Corolla | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Toyota | Tacoma | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Volkswagen | Passat | 2.8L | V6 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Volkswagen | Passat | 2.8L | V6 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 2000 | Volvo | S70 | AWD | 2.4L | L5 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1999 | Acura | CL | 2.3L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Acura | Integra | GS | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1999 | Acura | Integra | LS | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1999 | Audi | A4 | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Audi | A4 | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Audi | A4 Quattro | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Audi | A4 Quattro | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Audi | A6 | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Audi | A6 | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Audi | A6 Quattro | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Audi | A6 Quattro | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Audi | A8 | 3.7L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Audi | A8 | 3.7L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Chevrolet | Cavalier | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Chevrolet | Cavalier | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Chevrolet | Malibu | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Chevrolet | Metro | 1.0L | L3 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Chevrolet | Prizm | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Chevrolet | Tracker | 1.6L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Chevrolet | Tracker | 2.0L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Chrysler | Sebring | Coupe | 2.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1999 | Dodge | Avenger | 2.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Ford | Taurus | LX | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1999 | Ford | Taurus | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Honda | CR-V | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Hyundai | Sonata | 2.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Hyundai | Tiburon | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; Split Date To: To 8/16/1998; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | INFINITI | QX4 | 3.3L | V6 | Rear Left | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | INFINITI | QX4 | 3.3L | V6 | Rear Right | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Jeep | Cherokee | 4.0L | L6 | N/A | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Jeep | Grand Cherokee | 4.0L | L6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Lexus | ES300 | 3.0L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Mazda | Millenia | 2.3L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Mazda | Millenia | 2.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Mazda | Protege | 1.6L | L4 | Rear | Cutting and Welding Required During Installation; California Emissions Equipped Vehicles Registered Outside Of California; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Mazda | Protege | 1.8L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Mercedes-Benz | C230 | 2.3L | L4 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Mercedes-Benz | C230 | 2.3L | L4 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Mercedes-Benz | E320 | 4Matic | 3.2L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1999 | Mercedes-Benz | E320 | 4Matic | 3.2L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1999 | Mercedes-Benz | ML320 | 3.2L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Mercedes-Benz | ML320 | 3.2L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Mercedes-Benz | ML320 | 3.2L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Mercedes-Benz | ML320 | 3.2L | V6 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Mercedes-Benz | ML430 | 4.3L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Mercedes-Benz | ML430 | 4.3L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Mercedes-Benz | SLK230 | 2.3L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Mercury | Sable | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Nissan | Pathfinder | 3.3L | V6 | Rear Left | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Nissan | Pathfinder | 3.3L | V6 | Rear Right | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Nissan | Pathfinder | 3.3L | V6 | Right | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Nissan | Pathfinder | 3.3L | V6 | Left | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Oldsmobile | Alero | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Pontiac | Grand Am | 2.4L | L4 | N/A | 2nd Design; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Pontiac | Grand Am | 2.4L | L4 | N/A | 1st Design; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Pontiac | Sunfire | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Pontiac | Sunfire | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Suzuki | Grand Vitara | 2.5L | V6 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Suzuki | Vitara | 1.6L | L4 | Rear | Cutting and Welding Required During Installation; California Emissions Equipped Vehicles Registered Outside Of California; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Suzuki | Vitara | 2.0L | L4 | Rear | Cutting and Welding Required During Installation; California Emissions Equipped Vehicles Registered Outside Of California; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Suzuki | Vitara | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; Federal Emissions Equipped; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Suzuki | Vitara | 1.6L | L4 | N/A | Cutting and Welding Required During Installation; Federal Emissions Equipped; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Toyota | Celica | 2.2L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Toyota | Corolla | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1999 | Toyota | Tacoma | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Acura | CL | 2.3L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Acura | Integra | GS | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1998 | Acura | Integra | LS | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1998 | Acura | Integra | RS | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1998 | Acura | TL | 2.5L | L5 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Audi | A4 | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Audi | A4 | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Audi | A4 Quattro | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Audi | A4 Quattro | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Audi | A6 | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Audi | A6 | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Audi | A6 Quattro | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Audi | A6 Quattro | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Audi | A8 | 3.7L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Audi | A8 | 3.7L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | BMW | 528i | 2.8L | L6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | BMW | 528i | 2.8L | L6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | BMW | 540i | 4.4L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | BMW | 540i | 4.4L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | BMW | 740i | 4.4L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | BMW | 740i | 4.4L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | BMW | 740iL | 4.4L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | BMW | 740iL | 4.4L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Chevrolet | Cavalier | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Chevrolet | Cavalier | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Chevrolet | Malibu | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Chevrolet | Metro | 1.0L | L3 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Chevrolet | Prizm | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Chrysler | Sebring | Coupe | 2.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1998 | Dodge | Avenger | 2.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Ford | Mustang | 4.6L | V8 | Left Center | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Ford | Mustang | 4.6L | V8 | Right Center | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Ford | Taurus | LX | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1998 | Ford | Taurus | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Honda | Civic | EX | 1.6L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1998 | Honda | CR-V | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Hyundai | Elantra | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Hyundai | Tiburon | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; Split Date To: To 8/16/1998; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | INFINITI | QX4 | 3.3L | V6 | Rear Left | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | INFINITI | QX4 | 3.3L | V6 | Rear Right | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Lincoln | Mark VIII | 4.6L | V8 | N/A | Dual Outlet; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Mazda | Millenia | 2.3L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Mazda | Millenia | 2.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Mercedes-Benz | C230 | 2.3L | L4 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Mercedes-Benz | C230 | 2.3L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Mercedes-Benz | E320 | 4Matic | 3.2L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1998 | Mercedes-Benz | E320 | 4Matic | 3.2L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1998 | Mercedes-Benz | SLK230 | 2.3L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Mercury | Sable | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Mercury | Villager | 3.0L | V6 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Nissan | 240SX | 2.4L | L4 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Nissan | Pathfinder | 3.3L | V6 | Rear Left | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Nissan | Pathfinder | 3.3L | V6 | Rear Right | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Nissan | Pathfinder | 3.3L | V6 | Right | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Nissan | Pathfinder | 3.3L | V6 | Left | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Nissan | Quest | 3.0L | V6 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Pontiac | Grand Am | GT | Manual | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||
| 1998 | Pontiac | Grand Am | SE | Manual | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||
| 1998 | Pontiac | Sunfire | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Pontiac | Sunfire | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Toyota | Celica | 2.2L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Toyota | Corolla | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1998 | Toyota | Tacoma | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Acura | CL | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Acura | Integra | GS | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1997 | Acura | Integra | LS | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1997 | Acura | Integra | RS | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1997 | Acura | TL | 2.5L | L5 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Audi | A4 | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Audi | A4 | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Audi | A4 Quattro | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Audi | A4 Quattro | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Audi | A6 | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Audi | A6 | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Audi | A6 Quattro | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Audi | A6 Quattro | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Audi | A8 | 3.7L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Audi | A8 | 3.7L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | BMW | 528i | 2.8L | L6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | BMW | 528i | 2.8L | L6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | BMW | 540i | 4.4L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | BMW | 540i | 4.4L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | BMW | 740i | 4.4L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | BMW | 740i | 4.4L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | BMW | 740iL | 4.4L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | BMW | 740iL | 4.4L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Chevrolet | Cavalier | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Chevrolet | Cavalier | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Chevrolet | Malibu | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Chrysler | Concorde | 3.5L | V6 | Front Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Chrysler | Concorde | 3.5L | V6 | Front Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Chrysler | LHS | 3.5L | V6 | Front Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Chrysler | LHS | 3.5L | V6 | Front Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Chrysler | Sebring | Coupe | 2.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1997 | Dodge | Avenger | 2.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Dodge | Intrepid | 3.5L | V6 | Front Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Dodge | Intrepid | 3.5L | V6 | Front Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Dodge | Intrepid | 3.3L | V6 | Front Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Dodge | Intrepid | 3.3L | V6 | Front Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Ford | Mustang | 4.6L | V8 | Left Center | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Ford | Mustang | 4.6L | V8 | Right Center | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Ford | Taurus | LX | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1997 | Ford | Taurus | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Geo | Metro | 1.0L | L3 | N/A | Federal Emissions Equipped; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Geo | Metro | 1.0L | L3 | Front | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Geo | Prizm | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Geo | Prizm | 1.6L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Honda | Accord | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Honda | Accord | 2.7L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Honda | Civic | EX | 1.6L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1997 | Honda | Civic del Sol | Si | 1.6L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1997 | Honda | Civic del Sol | VTEC | 1.6L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1997 | Honda | CR-V | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Honda | Odyssey | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Hyundai | Accent | 1.5L | L4 | Rear | Cutting and Welding Required During Installation; Split Date To: To 5/1/1997; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Hyundai | Elantra | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Hyundai | Tiburon | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Hyundai | Tiburon | 2.0L | L4 | N/A | Cutting and Welding Required During Installation; Split Date To: To 8/16/1998; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Kia | Sephia | 1.6L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Kia | Sephia | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Lincoln | Mark VIII | 4.6L | V8 | N/A | Dual Outlet; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Mazda | Millenia | 2.3L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Mazda | Millenia | 2.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Mercedes-Benz | C230 | 2.3L | L4 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Mercedes-Benz | C230 | 2.3L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Mercury | Sable | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Mercury | Villager | 3.0L | V6 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Nissan | 240SX | 2.4L | L4 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Nissan | Quest | 3.0L | V6 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Oldsmobile | Achieva | Manual | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1997 | Pontiac | Grand Am | GT | Manual | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||
| 1997 | Pontiac | Grand Am | SE | Manual | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||
| 1997 | Pontiac | Sunfire | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Pontiac | Sunfire | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Saab | 900 | 2.5L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Toyota | Celica | 2.2L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Toyota | Celica | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Toyota | Corolla | 1.6L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Toyota | Corolla | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1997 | Toyota | Tacoma | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Acura | Integra | LS | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1996 | Acura | Integra | RS | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1996 | Acura | Integra | Special Edition | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1996 | Acura | TL | 2.5L | L5 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Audi | A4 | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Audi | A4 | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Audi | A4 Quattro | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Audi | A4 Quattro | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Audi | A6 | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Audi | A6 | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Audi | A6 Quattro | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Audi | A6 Quattro | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | BMW | 740iL | 4.4L | V8 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | BMW | 740iL | 4.4L | V8 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Chevrolet | Cavalier | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Chevrolet | Cavalier | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Chevrolet | Corsica | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Chrysler | Concorde | 3.5L | V6 | Front Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Chrysler | Concorde | 3.5L | V6 | Front Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Chrysler | Concorde | 3.3L | V6 | Front Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Chrysler | Concorde | 3.3L | V6 | Front Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Chrysler | LHS | 3.5L | V6 | Front Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Chrysler | LHS | 3.5L | V6 | Front Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Chrysler | New Yorker | 3.5L | V6 | Front Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Chrysler | New Yorker | 3.5L | V6 | Front Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Dodge | Avenger | 2.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Dodge | Intrepid | 3.5L | V6 | Front Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Dodge | Intrepid | 3.5L | V6 | Front Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Dodge | Intrepid | 3.3L | V6 | Front Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Dodge | Intrepid | 3.3L | V6 | Front Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Ford | Escort | 1.9L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Ford | Mustang | 4.6L | V8 | Left Center | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Ford | Mustang | 4.6L | V8 | Right Center | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Ford | Taurus | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Geo | Metro | 1.0L | L3 | N/A | Federal Emissions Equipped; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Geo | Metro | 1.0L | L3 | Front | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Geo | Prizm | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Geo | Prizm | 1.6L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Honda | Accord | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Honda | Accord | 2.7L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Honda | Civic | EX | 1.6L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1996 | Honda | Civic del Sol | Si | 1.6L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1996 | Honda | Civic del Sol | VTEC | 1.6L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1996 | Honda | Odyssey | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Hyundai | Accent | 1.5L | L4 | Rear | Cutting and Welding Required During Installation; California Emissions Equipped Vehicles Registered Outside Of California; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Hyundai | Accent | 1.5L | L4 | N/A | Federal Emissions Equipped; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Hyundai | Elantra | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Kia | Sephia | 1.6L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Kia | Sephia | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Lincoln | Mark VIII | 4.6L | V8 | N/A | Dual Outlet; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Mazda | Millenia | 2.3L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Mazda | Millenia | 2.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Mercedes-Benz | C220 | 2.2L | L4 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Mercedes-Benz | C220 | 2.2L | L4 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Mercedes-Benz | S320 | 3.2L | L6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Mercury | Sable | 3.0L | V6 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Mercury | Tracer | 1.9L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Mercury | Villager | 3.0L | V6 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Mitsubishi | Mighty Max | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Nissan | 240SX | 2.4L | L4 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Nissan | Quest | 3.0L | V6 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Oldsmobile | Achieva | Manual | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | |||
| 1996 | Pontiac | Grand Am | GT | Manual | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||
| 1996 | Pontiac | Grand Am | SE | Manual | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||
| 1996 | Pontiac | Sunfire | 2.2L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Pontiac | Sunfire | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Saab | 900 | 2.5L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Toyota | Camry | 2.2L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Toyota | Celica | 2.2L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Toyota | Celica | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Toyota | Corolla | 1.6L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Toyota | Corolla | 1.8L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1996 | Toyota | Tacoma | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1995 | Acura | TL | 2.5L | L5 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1995 | Audi | A6 | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1995 | Audi | A6 | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1995 | Audi | A6 Quattro | 2.8L | V6 | Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1995 | Audi | A6 Quattro | 2.8L | V6 | Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1995 | Geo | Metro | 1.0L | L3 | N/A | Federal Emissions Equipped; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1995 | Geo | Metro | 1.0L | L3 | Front | California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1995 | Hyundai | Accent | 1.5L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1995 | Mazda | Millenia | 2.3L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1995 | Mazda | Millenia | 2.5L | V6 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1995 | Mercedes-Benz | C220 | 2.2L | L4 | Rear Left | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1995 | Mercedes-Benz | C220 | 2.2L | L4 | Rear Right | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1995 | Mitsubishi | Mighty Max | 2.4L | L4 | N/A | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1995 | Nissan | 240SX | 2.4L | L4 | Front | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter | ||||
| 1995 | Toyota | Celica | 2.2L | L4 | Rear | Cutting and Welding Required During Installation; BRExhaust Federal Universal Standard Load OBDII Catalytic Converter |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.