/live/media/BS/BS_16193_Fro.jpg)
OE Quality
60-Day Returns
Bosch 16193 Oxygen Sensor - Downstream
Bosch Actual OE Oxygen Sensor for Hyundai Tucson
Bosch 16193 is a specific-fit, narrow-band heated oxygen sensor for the downstream position on select 2016-2018 Hyundai Tucson models. It provides the ECU with air-fuel-ratio feedback for stable closed-loop control and emissions monitoring.
Key Features
- Specific-fit downstream oxygen sensor for select Hyundai Tucson applications
- Narrow-band heated design for faster light-off and quicker closed-loop operation
- 4-wire configuration with square female connector and pin terminals
- Threaded mounting with 18 mm thread size and 22 mm hex size
- Wiring harness included with 27.8 in harness length
- Metal housing built for high-temperature and vibration exposure
- Bosch Actual OE Oxygen Sensor line reflects Bosch OE development experience
Product Details
Bosch 16193 is built as a standard replacement oxygen sensor for the downstream location on 2016-2018 Hyundai Tucson models. Bosch’s Actual OE Oxygen Sensor line draws on decades of OE sensor development, using ceramic sensing elements and controlled heater operation to improve response time and maintain accurate lambda feedback under changing exhaust temperatures. This part cross-references Monroe Shocks & Struts (e.g., 392102ETL2, 392102ETL4) for the same application.
What This Sensor Helps Address
- Check engine light related to oxygen sensor performance
- Incorrect air-fuel ratio feedback to the ECU
- Slow sensor response during closed-loop operation
- Emissions test failures tied to downstream sensor faults
- Rough combustion control caused by degraded sensor output
Installation Notes
Fits 2016-2018 Hyundai Tucson, downstream. Verify the connector shape, 4-wire layout, and threaded mounting style before installation. The sensor uses an 18 mm thread diameter and 22 mm hex size, so the correct oxygen sensor socket or wrench is recommended. Confirm the harness routing and connector location match the original part before final tightening.
Quality Assurance
Bosch manufactures this oxygen sensor to OE-level specifications using durable materials and heater control strategies developed for demanding exhaust environments. Bosch’s long history in oxygen sensor engineering supports consistent signal accuracy and dependable operation in normal service conditions.
| Brand | Bosch |
|---|---|
| Part Number | 16193 |
| Position | Actual OE Oxygen Sensor, Downstream |
| Wiring Harness Length | 27.8 |
| Terminal Type | Pin |
| Universal Or Specific Fit | Specific |
| Wire Quantity | 4 |
| Grade Type | Standard replacement |
| Connector Shape | Square |
| Terminal Quantity | 4 |
| Connector Gender | Female |
| Terminal Gender | Female |
| Overall Length | 31.1 |
| Mounting Type | Threaded |
| Automotive Color / Finish | Steel |
| Automotive Item Weight (lbs) | 0.240304 lb |
| Heated (Oxygen Sensor) | Yes |
| Hex Size (Oxygen Sensor) | 22 mm |
| Housing Material | Metal |
| Length (Sealing Surface To End Of Connector) | 29.9 in |
| Mounting Bracket Included | No |
| Oxygen Sensor Type | Narrow-band heated |
| Sensor Type | Narrow-band |
| Thread Diameter (Oxygen Sensor) | 18 mm |
| Thread Size | 18 |
| Wiring Harness Included | Yes |
This part fits 3 vehicles. Search below:
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2018 | Hyundai | Tucson | 2.0L | L4 | Downstream | Actual OE Oxygen Sensor |
| 2017 | Hyundai | Tucson | 2.0L | L4 | Downstream | Actual OE Oxygen Sensor |
| 2016 | Hyundai | Tucson | 2.0L | L4 | Downstream | Actual OE Oxygen Sensor |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.