Brembo 08.7104.11 Disc Brake Rotor - Rear

Brembo UV Coated Rear Rotor

The Brembo 08.7104.11 is a rear disc brake rotor built as a direct OE-style replacement for select Honda and Acura applications. It uses a UV-coated surface for corrosion resistance and a grey cast iron construction for stable braking performance and everyday driving comfort.

Key Features

• Premium UV coated rotor with solvent-free surface protection
• Grey cast iron construction for consistent braking feel
• Solid rotor design for rear brake applications
• 4-hole mounting pattern
• Fixing screws included
• Intelligent marking shows part number and minimum thickness
• Outside diameter: 239 mm
• Nominal thickness: 10 mm; minimum thickness: 8 mm

Product Details

Brembo’s Premium UV Coated OE Equivalent Rotor line is made for direct replacement service where factory-style fit and finish matter. The UV-coated braking surfaces help protect the disc from corrosion, including the plate surfaces, while the grey cast iron material supports quieter operation and reduced vibration. Part number 08.7104.11 is a solid rear rotor with a 239 mm outside diameter and 48.1 mm height, making it a precise match for the listed rear brake applications. This part cross-references Centric Parts (e.g., 120.40017, 121.40017) for the same application.

Compatible With 1990-1993 Acura Integra, rear; 1990-1991 Honda CRX, rear; 1988-1991 Honda Prelude, rear; and 1989 Honda Accord, rear. Brembo 08.7104.11 is a practical choice when replacing worn rear brake rotors on these vehicles and restoring consistent pedal response.

What It Helps Address

• Brake pulsation from rotor wear or thickness variation
• Corrosion on the braking surface
• Noise and vibration from aged rear rotors
• Reduced braking consistency from worn disc surfaces
• Service issues caused by rotors below minimum thickness

Installation Notes

Inspect pads, calipers, and hardware before installation. For best braking restoration, replace rotors and pads together, and verify rotor thickness against the minimum specification marked on the disc. Clean the hub mounting surface before installing the rotor to help prevent runout-related brake noise or pedal pulsation.

Quality Assurance

Brembo develops this rotor as an OE-equivalent replacement built to meet or exceed OEM specifications. The UV coating, cast iron construction, and part marking details are intended to support reliable service and straightforward identification during brake maintenance.