Brembo 09.C938.11 Disc Brake Rotor - Rear

Brembo UV Coated Rear Rotor for Volvo

The Brembo 09.C938.11 is a rear disc brake rotor built as a direct OE-style replacement for select Volvo applications. It uses a UV-coated surface for added protection and a grey cast iron construction for consistent braking performance.

Key Features

• Premium UV Coated OE equivalent rotor from Brembo
• Grey cast iron construction with vented design
• 320 mm outside diameter, 20 mm nominal thickness, 17.50 mm minimum thickness
• Height: 43 mm
• Solvent-free UV coating helps protect the disc and braking plate surfaces
• Intelligent marking shows the part number and minimum thickness
• Direct replacement for rear brake service on Volvo S60, S90, V60, V90, XC60, and XC90 applications

Product Details

Brembo’s Premium UV Coated OE Equivalent Rotor line is built for drivers who want a replacement rotor that matches original equipment specifications while adding corrosion protection to the braking surfaces. The 09.C938.11 rotor is a vented rear rotor made from grey cast iron and engineered for select Volvo models, including rear brake applications on the Volvo S60, Volvo S90, and Volvo XC60. For vehicles with the correct 320 mm rear rotor setup, this part number provides a direct service replacement.

This part cross-references Raybestos Brakes (e.g., 982109, 982109FZN) for the same application.

What It Helps Address

• Brake pulsation from worn or uneven rear rotors
• Noise and vibration during braking
• Corrosion on exposed rotor surfaces
• Reduced braking consistency from rotor wear
• Service replacement needs for rear Volvo brake maintenance

Installation Notes

Verify rotor diameter, thickness, and rear fitment before installation. This rotor is listed for rear applications on select 2016-2022 Volvo S60, S90, V60, V60 Cross Country, V90, V90 Cross Country, XC60, and XC90 models, including vehicles with 320 mm rear rotors where noted. Brembo recommends replacing rotors and pads together to restore braking performance, and pairing this rotor with Brembo NAO/Ceramic or Low Met brake pads.

Quality Assurance

Brembo develops this rotor as an OE-equivalent replacement built to meet or exceed OEM specifications. The UV coating is solvent-free, and the rotor includes clear wear identification markings for service reference.