Calorstat TE7194.97J Engine Coolant Thermostat Housing Assembly

Engine Coolant Thermostat Housing Assembly

Calorstat TE7194.97J is an engine coolant thermostat housing assembly built with a plastic housing, black finish, and a gasket seal included for service replacement. It is specified with a 206.0 degree start-to-open temperature and two outlet ports, making it a direct-fit cooling system component for select Audi, Bentley, and related applications.

Compatible With 2013-2018 Audi S6, 2013-2018 Audi S7, 2013-2018 Audi S8, 2013-2018 Audi RS7, 2013-2018 Audi A8 Quattro, and 2013-2018 Bentley Continental and Flying Spur applications listed below. Calorstat TE7194.97J is also cross-referenced to Dorman HELP 15932 for the same application.

Key Features

• Plastic thermostat housing assembly with black finish
• Start-to-open temperature: 206.0°F
• Gasket included with gasket-type seal
• Two outlet ports for the cooling circuit layout
• Five mounting holes for OE-style attachment
• Calorstat TE7194.97J part number for accurate ordering

Detailed Description

This engine coolant thermostat housing assembly is designed for vehicles that use a 97 C / 206 F opening temperature specification. The housing material is plastic, and the included gasket helps support a proper seal at the thermostat housing interface. Calorstat TE7194.97J is a practical replacement for cooling system service on Audi S6, Audi S7, Audi S8, Audi RS7, Audi A8 Quattro, Bentley Continental, and Bentley Flying Spur models listed in the fitment data.

Use TE7194.97J when replacing a cracked housing, a leaking thermostat housing seal, or a thermostat assembly that is no longer regulating coolant flow correctly. The two outlet ports and five-hole mounting pattern match the listed applications, helping maintain the original cooling system configuration.

Common Issues This Part Can Address

• Coolant leaks at the thermostat housing
• Cracked or heat-aged plastic housing
• Improper engine warm-up from thermostat control issues
• Temperature fluctuation caused by a worn housing seal
• Cooling system service on vehicles with the 206°F opening specification

Installation Notes and Tips

Confirm the OE part number and opening temperature before installation. Inspect the mating surfaces, coolant passages, and adjacent hoses for wear or contamination before fitting the new housing. Replace the gasket seal as part of the service, and refill and bleed the cooling system according to the vehicle manufacturer procedure after installation. Verify there are no leaks and that operating temperature stabilizes normally.

Quality Assurance

Calorstat TE7194.97J is built as a replacement thermostat housing assembly for the listed Audi and Bentley applications. The included gasket seal supports a proper service installation, and the part number cross-reference helps confirm application matching before purchase.

Fitment

• Fits 2017-2018 Audi A8 Quattro, N/A, to 11/27/2017
• Fits 2018 Audi RS7, N/A, opening temp: 97 C / 206 F
• Fits 2014-2016 Audi RS7, N/A, opening temp: 97 C / 206 F
• Fits 2013-2018 Audi S6, N/A, opening temp: 97 C / 206 F
• Fits 2018 Audi S7, N/A, opening temp: 97 C / 206 F
• Fits 2013-2016 Audi S7, N/A, opening temp: 97 C / 206 F
• Fits 2018 Audi S8, N/A, to 11/27/2017
• Fits 2015-2018 Bentley Flying Spur, N/A, opening temp: 97 C / 206 F
• Fits 2017 Audi RS7, N/A, to 11/27/2017
• Fits 2017 Audi S7, N/A, to 11/27/2017
• Fits 2013-2017 Audi S8, N/A, opening temp: 97 C / 206 F
• Fits 2013-2017 Bentley Continental, N/A, opening temp: 97 C / 206 F
• Fits 2013-2016 Audi A8 Quattro, N/A, opening temp: 97 C / 206 F