/live/media/A1/A1_18B4626_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Cardone 18-B4626 Disc Brake Caliper - Rear Right
| Brand | Cardone 18-B4626 |
|---|---|
| Position | Rear Right |
| Bleeder Port Size | M10x1.0 |
| Brake Caliper Finish | Oil emulsion |
| Caliper Color | Gray |
| E-Waste | No |
| Inlet Port Size | M10x1.0 |
| Installation Hardware Included | Yes |
| Mounting Bolts Included | No |
| Package Contents | Caliper; bracket; hardware kit |
| Pads Included | No |
| Piston Material | Steel |
| Piston Quantity | 1 |
| Piston Size (OD) (in) | 2.125 |
| Piston Size (OD) (mm) | 53.975 |
| Product Condition | Remanufactured |
| Product line | Unloaded Caliper w/Bracket |
| Fits | Chevrolet · 9 vehicles |
Remanufactured OE part. Built to original equipment standards for a precise fit and dependable performance.
Complete installation hardware. Includes a bracket and hardware kit for a simpler, more complete install.
Pressure-tested caliper. Verified for consistent braking performance with new premium components.
Cross-references Chevrolet 18021518 for the same application. See all 1.
Remanufactured Rear Right Brake Caliper
Cardone 18-B4626 is a remanufactured disc brake caliper with bracket for the rear right position on select Chevrolet Caprice and Chevrolet Impala applications. It is built with a steel piston, new seals, and a corrosion-resistant finish to support consistent braking performance and OE-style fitment.
Key Features
- Fits 1994-1996 Chevrolet Caprice, rear right, with Police Package or without Police Package
- Fits 1994-1996 Chevrolet Impala, rear right
- Unloaded caliper with bracket where applicable for the listed applications
- Steel piston with 2.125 in. (53.975 mm) piston size
- M10x1.0 inlet and bleeder port size
- Oil emulsion finish with gray caliper color
- New bleeder screw, seals, hardware clips, and mounting pins where applicable
- Plastic cap plugs protect brake port threads during installation
Product Details
This Cardone Unloaded Caliper w/Bracket line focuses on remanufactured OE-style brake hydraulics with application-specific fitment. Part number 18-B4626 is pressure-tested and remanufactured with premium replacement components, including high-temperature EPDM rubber seals and durable piston construction. For rear brake service on a Chevrolet Caprice or Chevrolet Impala, this caliper is built to restore proper hydraulic operation and maintain a clean, service-ready finish.
This part cross-references Chevrolet 18021518 for the same application.
Common Brake Issues It Can Address
- Rear brake drag or uneven pad contact
- Brake fluid leakage at the caliper
- Corrosion or sticking in the caliper piston area
- Soft or inconsistent brake pedal feel caused by caliper hydraulic problems
- Poor rear brake performance on the affected Chevrolet Caprice or Chevrolet Impala
Installation Notes
Use the OE-specified brake fluid listed on the master cylinder reservoir cap and replace fluid from a sealed container. Silicone grease is used on floating caliper mounting pins. Bleeder port size is M10x1.0, and the unit is supplied as an unloaded caliper with bracket for the listed fitments. Verify rear right placement and vehicle configuration before installation.
Quality Assurance
Cardone remanufactures this caliper to OE-style standards and pressure-tests each unit for consistent brake performance. The process uses fewer raw materials and less energy than producing a new part, while new premium components are used throughout the remanufacturing process.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1996 | Chevrolet | Caprice | Rear Right | with Police Package; with Metal Piston; Supplied with Mounting Bracket; Supplied with Standard Boots; Installation Hardware Included; Unloaded Caliper w/Bracket |
| 1996 | Chevrolet | Caprice | Rear Right | without Police Package; with Metal Piston; Supplied with Mounting Bracket; Supplied with Standard Boots; Installation Hardware Included; Unloaded Caliper w/Bracket |
| 1996 | Chevrolet | Impala | Rear Right | Disc Brake Caliper with Metal Piston, Mounting Bracket, Standard Boots, and Installation Hardware.; Unloaded Caliper w/Bracket |
| 1995 | Chevrolet | Caprice | Rear Right | with Police Package; with Metal Piston; Supplied with Mounting Bracket; Supplied with Standard Boots; Installation Hardware Included; Unloaded Caliper w/Bracket |
| 1995 | Chevrolet | Caprice | Rear Right | without Police Package; with Metal Piston; Supplied with Mounting Bracket; Supplied with Standard Boots; Installation Hardware Included; Unloaded Caliper w/Bracket |
| 1995 | Chevrolet | Impala | Rear Right | Disc Brake Caliper with Metal Piston, Mounting Bracket, Standard Boots, and Installation Hardware.; Unloaded Caliper w/Bracket |
| 1994 | Chevrolet | Caprice | Rear Right | with Police Package; with Metal Piston; Supplied with Mounting Bracket; Supplied with Standard Boots; Installation Hardware Included; Unloaded Caliper w/Bracket |
| 1994 | Chevrolet | Caprice | Rear Right | without Police Package; with Metal Piston; Supplied with Mounting Bracket; Supplied with Standard Boots; Installation Hardware Included; Unloaded Caliper w/Bracket |
| 1994 | Chevrolet | Impala | Rear Right | Disc Brake Caliper with Metal Piston, Mounting Bracket, Standard Boots, and Installation Hardware.; Unloaded Caliper w/Bracket |
| No rows match your filter. | ||||