Cardone 19-6462 Disc Brake Caliper - Front Right

Remanufactured Front Right Brake Caliper

Cardone 19-6462 is a remanufactured unloaded disc brake caliper for the front right position on select Hyundai Santa Fe and Kia Sorento applications. Built to OE fitment standards and pressure-tested for consistent brake performance, it is a practical replacement for a worn or sticking caliper on the 2010-2013 Hyundai Santa Fe and 2011-2013 Kia Sorento.

Key Features

• Remanufactured Original Equipment-style caliper for direct fitment
• Phenolic piston with a 63.4492 mm piston diameter
• New high-temperature EPDM rubber seals for durability
• New bleeder screw for reliable bleeding and sealing
• Plastic cap plug protects brake port threads during installation
• Oil emulsion finish with gray caliper color and rust-inhibiting treatment
• Hardware kit included; mounting bracket included where applicable
• Unloaded caliper design; pads are not included

Product Details

This Cardone Unloaded Caliper line focuses on OE-style replacement parts that are remanufactured with new premium components. The 19-6462 is pressure-tested, finished with a rust inhibitor, and assembled with new seals, stainless steel hardware clips, and new mounting pins where applicable. It is a solid choice for drivers searching for a front right brake caliper for Hyundai Santa Fe or Kia Sorento models that need restored hydraulic braking performance and proper pedal response.

This part cross-references Hyundai 581300W100 and Kia 581901UA00 for the same application.

What It Can Help Fix

• Brake drag from a sticking or seized front right caliper
• Uneven braking or pull during stops
• Brake fluid leakage at the caliper body or bleeder area
• Soft or inconsistent brake pedal feel caused by caliper wear
• Corrosion-related caliper performance loss

Installation Notes

• Fits 2011-2013 Kia Sorento, front right, phenolic piston assembly, includes installation hardware, mount bracket not included; unloaded caliper.
• Fits 2010-2012 Hyundai Santa Fe, front right, phenolic piston assembly, includes installation hardware, mount bracket not included; unloaded caliper.
• Use the OE-specified brake fluid listed on the master cylinder reservoir cap.
• Bleed the brake system thoroughly after installation to remove trapped air.
• A silicone grease is used on floating caliper mounting pins.
• Confirm inlet and bleeder port sizing before installation: M10x1.0.

Quality Assurance

Cardone remanufactures this caliper to rigorous quality and performance standards and pressure-tests each unit before release. The process uses new internal components and reduces raw material and energy use compared with manufacturing a new part.