/live/media/A1/A1_19B7385_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Cardone 19-B7385 Disc Brake Caliper - Front Right
| Brand | Cardone 19-B7385 |
|---|---|
| Position | Front Right |
| Pad Wear Sensor Included | No |
| Mounting Hardware Included | Yes |
| Bracket Included | Yes |
| Grade Type | Regular |
| Casting Number | 0160 |
| Casting Number | Kf600;0200 |
| Pads Included | No |
| Caliper Casting Material | Cast iron |
| Mounting Bolt Included | No |
| Bleeder Screw Included | Yes |
| Anti-Rattle Spring Included | No |
| Caliper Slides Included | Yes |
| Piston Quantity | 1 |
| Caliper Type | Floating |
| Piston Diameter | 2.136 |
| Piston Diameter | 54 |
| Inlet Fitting Type | Banjo |
| Caliper Color | Gray |
| Mounting Hole Diameter | 0.551 |
| Mounting Hole Diameter | 13.98989 |
| Abutment Clips Included | Yes |
| Mounting Bracket Included | Yes |
| Piston Material | Steel |
| Bleeder Screw Quantity | 1 |
| Caliper Finish | Powder coated |
| Bleeder Screw Cap Included | No |
| Bleeder Thread Size | M8x1.0 |
| Contains Electronic Components | No |
| Does it require SDS | No |
| Dust Boots Included | Yes |
| Product line | Remanufactured Brake Caliper |
| Fits | Mazda · 6 vehicles |
Remanufactured brake caliper. Built to rigorous quality and performance standards.
Pressure-tested. Delivers consistent brake performance you can trust.
Complete hardware included. Arrives ready for a simple, complete installation.
Cross-references BJY73398Z for the same application. See all 1.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Remanufactured Front Right Brake Caliper
Restore consistent braking performance on compatible Mazda applications with this Cardone remanufactured disc brake caliper. Built for the front right position, Cardone 19-B7385 is pressure-tested and assembled with new premium components for dependable operation and a straightforward replacement.
Compatible With 2014-2016 Mazda 3 and 2014-2016 Mazda 3 Sport, front right.
Key Features
- Remanufactured disc brake caliper for the front right position
- Floating caliper design with one 54 mm steel piston
- Cast iron caliper body with powder-coated gray finish
- Bleeder screw, dust boots, caliper slides, abutment clips, bracket, and mounting hardware included
- Banjo inlet fitting with M10x1.0 inlet thread size
- 100% pressure-tested for brake system performance verification
- Cardone 19-B7385 for Mazda 3 and Mazda 3 Sport applications
Product Details
Cardone’s Remanufactured Brake Caliper line focuses on restoring original braking function with new wear components and verified hydraulic integrity. This unit uses a floating caliper layout, cast iron construction, and a steel piston to deliver stable pedal response and reliable clamping force. The included bracket, slides, dust boots, and abutment clips support a complete front-right brake caliper replacement on 2014-2016 Mazda 3 and Mazda 3 Sport models.
This part cross-references Monroe Shocks & Struts (e.g., BJY73398Z) for the same application. Part number 19-B7385 is a direct reference for shoppers searching for a remanufactured front right brake caliper for Mazda 3 brake repair.
Common Problems This Part Can Address
- Uneven braking or pull to one side during braking
- Sticking or seized front right caliper movement
- Brake fluid seepage at the caliper assembly
- Low brake pedal caused by caliper-related hydraulic issues
- Noise or drag from worn caliper hardware and slides
Installation Notes
Verify the vehicle’s brake fluid specification before installation and use the fluid type listed on the master cylinder reservoir lid. Clean and lubricate floating caliper mounting pins with silicone grease, and bleed the brake system after installation to remove trapped air. Confirm inlet fitting and thread size match the vehicle before assembly. Part number 19-B7385 is intended for the front right position on the listed Mazda 3 and Mazda 3 Sport applications.
Quality Assurance
Each Cardone remanufactured brake caliper is rebuilt to defined quality and performance standards, then pressure-tested before release. New premium components are used throughout the remanufacturing process to support long-term reliability and consistent brake operation.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2016 | Mazda | 3 | 2.0L | L4 | Front Right | Remanufactured Brake Caliper |
| 2016 | Mazda | 3 Sport | 2.0L | L4 | Front Right | Remanufactured Brake Caliper |
| 2015 | Mazda | 3 | 2.0L | L4 | Front Right | Remanufactured Brake Caliper |
| 2015 | Mazda | 3 Sport | 2.0L | L4 | Front Right | Remanufactured Brake Caliper |
| 2014 | Mazda | 3 | 2.0L | L4 | Front Right | Remanufactured Brake Caliper |
| 2014 | Mazda | 3 Sport | 2.0L | L4 | Front Right | Remanufactured Brake Caliper |
| No rows match your filter. | ||||||