/live/media/A1/A1_19B7391_Fro.jpg)
Cardone 19-B7391 Disc Brake Caliper - Rear Left
| Brand | Cardone 19-B7391 |
|---|---|
| Position | Rear Left |
| Pad Wear Sensor Included | No |
| Mounting Hardware Included | Yes |
| Bracket Included | Yes |
| Grade Type | Regular |
| Casting Number | Bc140191 |
| Casting Number | Bc412178 |
| Pads Included | No |
| Caliper Casting Material | Aluminum |
| Mounting Bolt Included | No |
| Bleeder Screw Included | Yes |
| Anti-Rattle Spring Included | No |
| Caliper Slides Included | Yes |
| Piston Quantity | 1 |
| Caliper Type | Floating |
| Piston Diameter | 1.335 |
| Piston Diameter | 33.909 |
| Inlet Fitting Type | Banjo |
| Caliper Color | Gray |
| Mounting Hole Diameter | 0.398 |
| Mounting Hole Diameter | 10.10522 |
| Abutment Clips Included | Yes |
| Mounting Bracket Included | Yes |
| Piston Material | Steel |
| Bleeder Screw Quantity | 1 |
| Caliper Finish | Oil emulsion |
| Bleeder Screw Cap Included | No |
| Bleeder Thread Size | M10x1.0 |
| Contains Electronic Components | No |
| Does it require SDS | No |
| Dust Boots Included | Yes |
| Product line | Remanufactured Brake Caliper |
| Fits | Hyundai · 4 vehicles |
Remanufactured brake caliper. Built to rigorous quality and performance standards.
Pressure-tested. Delivers consistent braking performance you can trust.
Complete installation. Includes new hardware, bracket, slides, and dust boots.
Cross-references 58310F3A30 for the same application. See all 1.
Remanufactured Rear Left Brake Caliper
This Cardone remanufactured brake caliper is built for the rear left position on select Hyundai Elantra models. It is a direct-fit disc brake caliper for 2017-2020 Hyundai Elantra applications and is engineered for consistent braking response with renewed internal components.
Part number 19-B7391 is a practical replacement for a worn or sticking rear caliper on the Hyundai Elantra. The aluminum floating caliper design includes a steel piston, bleeder screw, caliper slides, dust boots, abutment clips, and a mounting bracket where applicable, helping simplify service on the rear brake system.
Key Features
- Fits 2017-2020 Hyundai Elantra, rear left
- Cardone remanufactured brake caliper, part number 19-B7391
- Aluminum floating caliper design
- 1.335 in. piston diameter with steel piston construction
- Includes bleeder screw, caliper slides, dust boots, abutment clips, and mounting bracket
- Banjo inlet fitting with M10x1.0 thread size
- Gray finish with oil emulsion coating
- Mounting hardware included
Product Details
Cardone remanufactured brake calipers are rebuilt with new premium components and pressure-tested to verify brake performance before shipment. This rear left caliper for the Hyundai Elantra uses a floating design with one piston and includes the bracket for the listed application. The gray aluminum housing and renewed sealing components help restore proper hydraulic operation in the rear disc brake system. If you are replacing a dragging, leaking, or uneven rear caliper, 19-B7391 provides a direct service solution for the 2017-2020 Hyundai Elantra.
This part cross-references Hyundai OE part number 58310F3A30 for the same application.
Common Repair Uses
- Rear brake drag caused by a sticking caliper
- Brake fluid leakage at the caliper body or bleeder area
- Uneven rear braking on one side of the vehicle
- Soft or inconsistent rear brake response after caliper wear
- Corrosion or piston wear in the original rear left caliper
Installation Notes
Verify the rear left position and confirm fitment before installation. Use the correct brake fluid specified by the vehicle manufacturer, and bleed the brake system thoroughly after replacement. Floating caliper mounting pins should be lubricated with silicone grease, and all sealing surfaces should be inspected during service. Part number 19-B7391 is intended for 2017-2020 Hyundai Elantra rear left applications only.
Quality Assurance
Each Cardone remanufactured brake caliper is pressure-tested and assembled with new premium components to support reliable brake operation. The remanufacturing process is focused on restoring proper hydraulic function and consistent pedal response for the specified Hyundai Elantra application.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2020 | Hyundai | Elantra | 2.0L | L4 | Rear Left | Remanufactured Brake Caliper |
| 2019 | Hyundai | Elantra | 2.0L | L4 | Rear Left | Remanufactured Brake Caliper |
| 2018 | Hyundai | Elantra | 2.0L | L4 | Rear Left | Remanufactured Brake Caliper |
| 2017 | Hyundai | Elantra | 2.0L | L4 | Rear Left | Remanufactured Brake Caliper |
| No rows match your filter. | ||||||