/live/media/A1/A1_1A18014_Fro.jpg)
Cardone 1A-18014 Rack and Pinion Assembly
| Brand | Cardone 1A-18014 |
|---|---|
| Distance Between Mounting Holes (in) | 18.5 |
| Distance Between Mounting Holes (mm) | 470 |
| E-Waste | Yes |
| Input Shaft Diameter (in) | 0.66 |
| Input Shaft Diameter (mm) | 16.76 |
| Input Shaft Length (in) | 4.5 |
| Input Shaft Length (mm) | 114.3 |
| Package Contents | EPS Rack; Caution Tag; Instruction Sheet; Packing Material |
| Product Condition | Remanufactured |
| Rack Length (in) | 47.5 |
| Rack Length (mm) | 1206.5 |
| Steering Rack Color/Finish | Black |
| Thread Length (in) | 2.5 |
| Thread Length (mm) | 63.5 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 2.9 |
| Product line | Rack and Pinion Assembly |
| Fits | Buick and Chevrolet · 2 vehicles |
Remanufactured OE part. Built to restore original steering performance with a precise factory fit.
New sealing components. Replaced rubber seals help eliminate internal leaks and keep performance reliable.
Protective coating. Helps resist corrosion and rust for longer service life.
Cross-references Buick 13372109 and Chevrolet 13372109 for the same application. See all 2.
Remanufactured EPS Rack for Cruze and Verano
Cardone 1A-18014 is a remanufactured electronic power steering rack and pinion assembly built for direct replacement on select 2012 Buick Verano and 2012 Chevrolet Cruze applications. It is rebuilt with new premium components, tested under simulated road conditions, and finished for corrosion resistance.
Key Features
- Remanufactured Original Equipment-style fit for the listed applications
- Electronic power steering rack and pinion assembly with tie rod ends included
- 100% replacement of rubber sealing components to help reduce internal leakage
- New spool valve seals and rack donut seals installed where applicable
- Specialized lubricant applied to support longer service life
- Factory test drive verifies operation and on-car communications
- Protective black finish helps resist rust and corrosion
- Earth-friendly remanufacturing process reduces raw material and energy use versus new part production
Product Details
This Cardone Rack and Pinion Assembly, part number 1A-18014, is engineered for vehicles with electronic power assist and includes inner tie rods for the confirmed applications. It measures 47.5 inches in rack length, has a 2.9 total turns lock to lock, and uses a 2-hole mounting pattern with 18.5 inches between mounting holes. The unit is remanufactured to restore steering response and communication between the steering system and vehicle electronics. This part cross-references Buick 13372109 and Chevrolet 13372109 for the same application.
What It Helps Address
- Steering play or looseness in the rack and pinion assembly
- Internal fluid leakage from worn seals
- Rough or inconsistent steering effort
- Electronic power steering communication faults tied to the rack assembly
- Corrosion-related wear on the steering gear housing
Installation Notes
Fits 2012 Buick Verano, N/A, with 17" wheels and electronic power assist. Fits 2012 Chevrolet Cruze, N/A, with electronic power assist. Flash programming is required after installation using manufacturer software and a J2534 device, and zero-point calibration must be performed with a scan tool. Verify steering column and suspension alignment before returning the vehicle to service.
Quality Assurance
Cardone remanufactures this EPS rack and pinion assembly to rigorous performance standards and validates operation through factory testing that simulates demanding driving conditions. The process includes replacement of sealing components, application of specialized lubricant, and inspection for proper on-car communication and durability.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2012 | Buick | Verano | 2.4L | L4 | N/A | with 17" Wheels; Includes Inner Tie Rods; Flash programming is required following installation to ensure proper performance. Software must be downloaded from vehicle manufacturer and programmed using a J2534 device.; Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration.; with Electronic Power Assist; Rack and Pinion Assembly |
| 2012 | Chevrolet | Cruze | — | — | N/A | Includes Inner Tie Rods; Flash programming is required following installation to ensure proper performance. Software must be downloaded from vehicle manufacturer and programmed using a J2534 device.; Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration.; with Electronic Power Assist; Rack and Pinion Assembly |
| No rows match your filter. | ||||||