/live/media/A1/A1_1A2024_Fro.jpg)
Cardone 1A-2024 Rack and Pinion Assembly
| Brand | Cardone 1A-2024 |
|---|---|
| Type | Electric |
| Mounting Hardware Included | No |
| Grade Type | Regular |
| Gasket Or Seal Included | No |
| Mounting Hole Quantity | 2 |
| Mounting Brackets Included | No |
| Bellows Color | Black |
| Outer Tie Rods Included | No |
| End To End Length | 1421.84 |
| End To End Length | 56.00 |
| Total Turns Lock To Lock | 3.88 |
| Steering Input Shaft Diameter | 0.70 |
| Steering Input Shaft Diameter | 17.77 |
| Inner Tie Rods Included | Yes |
| Contains Electronic Components | Circuit board |
| Does it require SDS | No |
| E-Waste | Yes |
| FAA_A1 | Rubber seals, dust boots, wear items, lubricant(s), clamps and be |
| FAA_A2 | Yes, all units produced are verified to function to o.e. design s |
| FAA_A3 | Yes, the steering wheel must be held in a straight-ahead position |
| FAA_A4 | Yes, these systems are equipped with torque angle sensors in the |
| FAA_A5 | Not recommended; radical modifications would be needed for instal |
| Input Shaft Type | Notched |
| Input Shaft Type | Point |
| Is Item A Chemical | No |
| Product line | Remanufactured Rack and Pinion Assembly |
| Fits | Ford and Lincoln · 7 vehicles |
Remanufactured assembly. Built with brand-new premium components for lasting reliability.
Factory tested. Verified under extreme conditions and on-car communications checks.
Electric power steering. Includes a circuit board and replaced rubber seals for durability.
Cross-references GG1Z3504F for the same application. See all 1.
Remanufactured EPS Rack for Ford and Lincoln
This CARDONE remanufactured electronic power steering rack and pinion assembly is built for direct replacement in select Ford and Lincoln applications. It combines remanufactured core components with new premium wear items to support consistent steering response and long-term reliability.
Compatible with 2016-2019 Ford Flex, 2018-2019 Ford Taurus, and 2019 Lincoln MKT, this CARDONE 1A-2024 rack and pinion assembly is an electric EPS unit with inner tie rods included and a black bellows finish.
Key Features
- Remanufactured electronic power steering rack and pinion assembly
- Electric type with circuit board electronic components
- Inner tie rods included
- End-to-end length: 56.00 in. (1421.84 mm)
- Total turns lock to lock: 3.88
- Steering input shaft diameter: 0.70 in. (17.77 mm)
- Notched, point input shaft type
- Black bellows color
- Mounting hole quantity: 2
- Part number: 1A-2024
Product Details
CARDONE’s remanufactured rack and pinion line focuses on restoring steering performance with updated wear components and verified electronic function. During remanufacturing, rubber seals, dust boots, clamps, bearings, and other wear items are replaced, and a specialized lubricant is applied to support smoother operation and extended service life. Each unit is tested to O.E. design specifications and evaluated under CARDONE’s Factory Test Drive process, which checks operation under demanding conditions and confirms on-car communication.
This part cross-references Ford OE number GG1Z3504F for the same application. The 1A-2024 is a practical replacement choice for drivers servicing a Ford Flex rack and pinion, Ford Taurus steering rack, or Lincoln MKT EPS steering assembly.
Common Steering Problems This Part Can Address
- Excessive steering play or loose steering feel
- Uneven or inconsistent steering assist from an electric rack
- Noise or binding from worn internal rack components
- Fluid-free EPS steering issues related to electronic rack wear
- Failed steering response caused by damaged seals, boots, or internal wear items
Installation Notes
Before installation, hold the steering wheel in the straight-ahead position to prevent clock spring damage when disconnecting the intermediate shaft. These systems use torque angle sensors in the steering column, so recalibration is required after replacement. Mounting hardware, mounting brackets, outer tie rods, and seals are not listed as included, so verify all required transfer parts before beginning the job.
Fits 2016-2019 Ford Flex, N/A. Fits 2018-2019 Ford Taurus, N/A. Fits 2019 Lincoln MKT, N/A.
Quality Assurance
Each CARDONE remanufactured rack and pinion assembly is verified to function to O.E. design specifications, with validated improvements applied where original failure modes are identified. The remanufacturing process replaces rubber sealing components and wear items 100%, then adds premium components and lubricant to support dependable steering performance. Part number 1A-2024 is built for the listed Ford Flex, Ford Taurus, and Lincoln MKT applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2019 | Ford | Flex | N/A | Remanufactured Rack and Pinion Assembly |
| 2019 | Ford | Taurus | N/A | Remanufactured Rack and Pinion Assembly |
| 2019 | Lincoln | MKT | N/A | Remanufactured Rack and Pinion Assembly |
| 2018 | Ford | Flex | N/A | Remanufactured Rack and Pinion Assembly |
| 2018 | Ford | Taurus | N/A | Remanufactured Rack and Pinion Assembly |
| 2017 | Ford | Flex | N/A | Remanufactured Rack and Pinion Assembly |
| 2016 | Ford | Flex | N/A | Remanufactured Rack and Pinion Assembly |
| No rows match your filter. | ||||