/live/media/A1/A1_1A2037_Fro.jpg)
Cardone 1A-2037 Rack and Pinion Assembly
| Brand | Cardone 1A-2037 |
|---|---|
| Type | Electric |
| Mounting Hardware Included | No |
| Grade Type | Regular |
| Gasket Or Seal Included | No |
| Mounting Hole Quantity | 2 |
| Mounting Brackets Included | No |
| Bellows Color | Black |
| Outer Tie Rods Included | No |
| End To End Length | 1383.76 |
| End To End Length | 54.50 |
| Total Turns Lock To Lock | 2.63 |
| Steering Input Shaft Diameter | 0.73 |
| Steering Input Shaft Diameter | 18.54 |
| Inner Tie Rods Included | Yes |
| Contains Electronic Components | Circuit board |
| Does it require SDS | No |
| E-Waste | Yes |
| FAA_A1 | Rubber seals, dust boots, wear items, lubricant(s), clamps and be |
| FAA_A2 | Yes, all units produced are verified to function to o.e. design s |
| FAA_A3 | Yes, the steering wheel must be held in a straight-ahead position |
| FAA_A4 | Yes, these systems are equipped with torque angle sensors in the |
| FAA_A5 | Not recommended; radical modifications would be needed for instal |
| Input Shaft Type | Notched |
| Input Shaft Type | Point |
| Is Item A Chemical | No |
| Fits | — |
Remanufactured assembly. Built to rigorous quality and performance standards for dependable steering.
Electronic power steering. Includes a circuit board and verified O.E.-spec operation.
Rebuilt with new components. Rubber seals, dust boots, wear items, lubricant, clamps, and bearings are replaced.
Cross-references EG1Z3504K and EG1Z3504L for the same application. See all 2.
Remanufactured Electronic Steering Rack
CARDONE 1A-2037 is a remanufactured electric rack and pinion assembly built for electronic power steering systems. It is rebuilt with new premium components, replaced rubber sealing parts, and specialized lubricant to support long service life and consistent steering response.
This CARDONE Remanufactured Rack and Pinion Assembly is a direct-fit steering gear solution for vehicles using an EPS setup. It is engineered for applications such as Ford Edge and Lincoln MKX steering systems where precise input, smooth assist, and reliable on-car communication matter.
Key Features
- Electric rack and pinion assembly for electronic power steering
- Remanufactured to rigorous quality and performance standards
- Brand-new premium components used during the rebuild process
- All rubber sealing components replaced
- Specialized lubricant applied for added durability
- Factory Test Drive verifies operation under demanding conditions
- Includes inner tie rods
- Contains electronic components, including a circuit board
- Black bellows color
- Part number: 1A-2037
Product Details
CARDONE’s remanufactured electronic power steering rack and pinion line focuses on restoring OE-style steering performance with verified electronic communication and functional testing. Part 1A-2037 is built as an EPS rack assembly with a notched, point-style input shaft, 2 mounting holes, and a 54.50-inch end-to-end length. It is a practical replacement for Ford Edge and Lincoln MKX vehicles that require an electric steering rack and pinion assembly. This part cross-references Ford OE numbers EG1Z3504K and EG1Z3504L for the same application.
What It Helps Fix
- Excessive steering play or loose steering feel
- Uneven or inconsistent electric power steering assist
- Steering noise from a worn rack and pinion assembly
- Fluid-free EPS steering gear wear in the rack housing or internal components
- Electronic steering faults tied to rack-mounted components
Installation Notes
Before removal, hold the steering wheel in the straight-ahead position to prevent clock spring damage when disconnecting the intermediate shaft. After installation, recalibrate the steering column torque angle sensors as required by the EPS system. Mounting hardware, outer tie rods, gaskets, seals, and brackets are not listed as included, so verify all related service parts before installation. This part is not recommended for custom or classic vehicle conversions outside the original OE application.
Quality Assurance
Each unit is factory tested to verify operation under simulated driving conditions and to confirm on-car communications. CARDONE replaces wear items such as rubber seals and dust boots, validates function to OE design specifications, and applies improvements where failure modes are identified. The product is remanufactured for dependable steering performance in Ford Edge and Lincoln MKX applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||