/live/media/A1/A1_1A3024_Fro.jpg)
Cardone 1A-3024 Rack and Pinion Assembly
| Brand | Cardone 1A-3024 |
|---|---|
| Distance Between Mounting Holes (in) | 21.625 |
| Distance Between Mounting Holes (mm) | 549.28 |
| E-Waste | Yes |
| Input Shaft Diameter (in) | 0.692 |
| Input Shaft Diameter (mm) | 17.58 |
| Input Shaft Length (in) | 2 |
| Input Shaft Length (mm) | 50.8 |
| Package Contents | EPS Rack; Caution Tag; Instruction Sheet; Packing Material |
| Product Condition | Remanufactured |
| Rack Length (in) | 12 |
| Rack Length (mm) | 304.8 |
| Steering Rack Color/Finish | Black |
| Thread Length (in) | 1.81 |
| Thread Length (mm) | 46.08 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 2.688 |
| Product line | Rack and Pinion Assembly |
| Fits | Acura · 6 vehicles |
Remanufactured OE part. Built to original equipment standards for a precise replacement fit.
Factory-tested performance. Verified under extreme conditions for reliable on-car communication.
Protective coating. Helps resist corrosion and rust for longer service life.
Cross-references Acura 53600TK4A01 for the same application. See all 1.
Cardone EPS Rack for Acura TL
Restore precise steering response with this remanufactured Cardone rack and pinion assembly for the 2009-2014 Acura TL. Part number 1A-3024 is built as an electronic power steering rack with new sealing components, specialized lubricant, and OE-style fitment for the Acura TL platform.
Key Features
- Remanufactured Original Equipment rack and pinion assembly
- Fits 2009-2014 Acura TL with electronic power assist
- Includes inner tie rods
- All rubber sealing components are replaced
- New spool valve seals and rack donut seals help eliminate internal leaks where applicable
- Factory test drive verifies operation under extreme conditions and checks on-car communications
- Protective black finish helps resist corrosion and rust
- Specialized lubricant is applied during remanufacturing for extended service life
- Distance between mounting holes: 21.625 in. (549.28 mm)
- Total turns lock to lock: 2.688
Product Details
Cardone’s rack and pinion assembly line focuses on remanufactured steering components that are returned to OE-level fit and function. This unit is remanufactured with brand-new premium parts, including sealing components and lubricant, then tested to confirm performance and electronic communication before release. For Acura TL steering repair, 1A-3024 provides a direct replacement solution for vehicles equipped with electronic power assist.
This part cross-references Acura 53600TK4A01 for the same application.
Common Steering Issues This Part Can Address
- Steering play or looseness in the Acura TL
- Internal hydraulic or seal-related leakage
- Uneven or inconsistent steering effort
- Noise or roughness from a worn rack assembly
- Electronic power steering communication faults tied to the rack assembly
Installation Notes
Compatible With 2009-2014 Acura TL, with electronic power assist. Zero-point calibration is required after installation, and a scan tool must be used to complete the calibration. Verify mounting dimensions, input shaft measurements, and tie rod configuration before installation. Follow the included instruction sheet and caution tag during setup.
Quality Assurance
Each Cardone electronic power steering rack and pinion assembly is remanufactured to rigorous quality and performance standards, then factory test driven to confirm operation under demanding conditions. The process also reduces energy and raw material use compared with manufacturing a new part.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2014 | Acura | TL | N/A | Includes Inner Tie Rods; Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration.; with Electronic Power Assist; Rack and Pinion Assembly |
| 2013 | Acura | TL | N/A | Includes Inner Tie Rods; Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration.; with Electronic Power Assist; Rack and Pinion Assembly |
| 2012 | Acura | TL | N/A | Includes Inner Tie Rods; Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration.; with Electronic Power Assist; Rack and Pinion Assembly |
| 2011 | Acura | TL | N/A | Includes Inner Tie Rods; Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration.; with Electronic Power Assist; Rack and Pinion Assembly |
| 2010 | Acura | TL | N/A | Includes Inner Tie Rods; Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration.; with Electronic Power Assist; Rack and Pinion Assembly |
| 2009 | Acura | TL | N/A | Includes Inner Tie Rods; Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration.; with Electronic Power Assist; Rack and Pinion Assembly |
| No rows match your filter. | ||||