/live/media/A1/A1_1H20223_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Cardone 1H-20223 Power Steering Pump
| Brand | Cardone 1H-20223 |
|---|---|
| Pulley Included | No |
| Inlet Attachment Type | Barb |
| Outlet Attachment Type | Threaded |
| Type | Hydraulic |
| Mounting Hardware Included | No |
| Inlet Diameter | 0.424 |
| Inlet Diameter | 10.75 |
| Inlet Quantity | 1 |
| Outlet Quantity | 1 |
| Reservoir Included | Yes |
| Filter Included | No |
| Remote Reservoir | Yes |
| Reservoir Cap Included | No |
| Hose Port Type | O-ring |
| 9898 | No |
| Contains Electronic Components | Circuit board |
| Does it require SDS | No |
| E-Waste | Yes |
| FAA_A1 | Automobile manufacturers are favoring ehps pumps because they res |
| FAA_A2 | An ehps pump consists of an electronic motor and a hydraulic pump |
| FAA_A3 | Most automobile manufactures do not recommend servicing individua |
| FAA_A4 | Unlike traditional power steering pumps, the ehps pumps require a |
| FAA_A5 | No. you must use the correct fluid specified in the o.e. service |
| FAA_A6 | An ehps pump has a different appearance than a traditional power |
| FAA_A7 | Yes. the hydraulic system must be flushed according to the o.e. s |
| FAA_A8 | Yes, a bleeding procedure must be performed, just like a traditio |
| Product line | Remanufactured Power Steering Pump |
| Fits | Mazda · 4 vehicles |
Remanufactured unit. Built to meet or exceed O.E. performance standards.
Hydraulic efficiency tested. Each unit is checked for reliable, long-lasting operation.
Aluminum and plastic housing. Combines lightweight construction with durable design.
Cross-references C51332600B, C51332600C and C51332600D for the same application. See all 4.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Remanufactured EHPS Pump for Mazda 5
Restore hydraulic steering performance with this remanufactured Cardone Electrohydraulic Power Steering Pump. Built for 2012-2015 Mazda 5 applications, Part Number 1H-20223 is engineered to meet or exceed original equipment performance while addressing wear points found in the original design.
Cardone’s remanufactured power steering pump line focuses on durable replacement units for vehicles that use electrohydraulic steering. For Mazda 5 owners searching for a remanufactured power steering pump, 1H-20223 provides a direct-fit solution with the correct hydraulic and electrical architecture for the application.
Key Features
- Remanufactured electrohydraulic power steering pump
- Fits 2012-2015 Mazda 5
- Hydraulic type with remote reservoir
- Barb inlet attachment and threaded outlet attachment
- Outlet thread size: 14x1.5
- Aluminum and plastic housing construction
- Reservoir included; filter and pulley not included
- Includes electronic components and circuit board
- Package includes electronic hydraulic power steering pump and sealing kit
Detailed Description
Cardone 1H-20223 is a remanufactured EHPS pump designed for vehicles that use an electrohydraulic steering system rather than a traditional belt-driven pump. This design uses an electric motor to drive hydraulic pressure, helping maintain steering assist without the belt and pulley mass of conventional systems. The unit is built with a remote reservoir layout, one inlet and one outlet, and an O-ring hose port type for the specified Mazda 5 application.
Each unit is remanufactured with attention to critical operating components and tested for hydraulic efficiency to verify proper flow and pressure output. The result is a replacement pump intended for drivers and repair shops servicing 2012, 2013, 2014, and 2015 Mazda 5 models that need a remanufactured power steering pump with the correct OE-style configuration. This part cross-references Mazda OE numbers C51332600B and C51332600C for the same application.
Common Problems This Part Can Address
- Loss of power steering assist
- Whining or noisy pump operation
- Hydraulic pressure loss in the steering system
- Fluid leakage at the pump or hose connections
- Steering effort that becomes heavy or inconsistent
Installation Notes and Tips
Fits 2012-2015 Mazda 5, N/A. Confirm the vehicle uses an EHPS setup before ordering, since this pump is not a conventional belt-driven unit. Use the fluid specified in the OE service manual or owner’s manual, flush the hydraulic system during service, and perform the required bleeding procedure after installation. Because this system uses electronic control components, verify electrical connections and module communication before finalizing the repair.
Quality Assurance
Cardone remanufactured EHPS pumps are engineered to meet or exceed OE performance. Original designs are reviewed for improvement opportunities, and applicable upgrades are incorporated to improve durability. Critical components are tested, and each unit undergoes a hydraulic efficiency test to help ensure reliable operation.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2015 | Mazda | 5 | N/A | Remanufactured Power Steering Pump |
| 2014 | Mazda | 5 | N/A | Remanufactured Power Steering Pump |
| 2013 | Mazda | 5 | N/A | Remanufactured Power Steering Pump |
| 2012 | Mazda | 5 | N/A | Remanufactured Power Steering Pump |
| No rows match your filter. | ||||