Cardone
Rack and Pinion Assembly

Cardone 22-1001 Rack and Pinion Assembly

Brand Cardone 22-1001
Casting Material Steel; Aluminum
Distance Between Mounting Holes (in) 16.75
Distance Between Mounting Holes (mm) 425.45
E-Waste No
Hose Port Type O-Ring
Input Shaft Diameter (in) 0.79
Input Shaft Diameter (mm) 19.96
Input Shaft Length (in) 1.75
Input Shaft Length (mm) 44.45
Number of Mounting Holes 2
Package Contents Rack and Pinion, Sealing Kit, Instruction Sheet
Pressure Port Thread Size M18 x 1.5
Product Condition Remanufactured
Rack Length (in) 50.75
Rack Length (mm) 1289.05
Return Port Thread Size M16 x 1.5
Steering Rack Color Black
Thread Length (in) 2.56
Thread Length (mm) 64.90
Tie Rod Ends Included Yes
Total Turns Lock to Lock 2.75
Product line Rack and Pinion Assembly
Fits Pontiac · 5 vehicles

Remanufactured OE replacement. Built to original equipment standards for a precise fit and dependable performance.

Factory-tested unit. Simulates extreme operating conditions while verifying on-car communications.

New sealing components. All rubber seals are replaced to help prevent internal leaks and extend service life.

Cross-references Pontiac 26084647, Pontiac 26088334 and Pontiac 26099979 for the same application. See all 3.

$306.20Free shipping
In stock · usually ships same day before 1pm CST
Step 1 — Confirm fitment
Free return shipping if it doesn't fit when you check fitment here first.
Select your vehicle to confirm fitment
Verify this part fits before purchasing — free returns if it doesn't
Step 2 — Quantity
Order total $306.20
Free shipping to the continental U.S.
Free returns within 60 days if it doesn't fit when fitment is verified.

Cardone Rack and Pinion for Bonneville

Restore precise steering response with this remanufactured CARDONE Electronic Power Steering Rack and Pinion Assembly, Part Number 22-1001. Built for 2001-2005 Pontiac Bonneville models with hydraulic power steering and without Magnetic Speed Variable Assist Steering (NV8), it is remanufactured with new premium components and tested to verify on-car communication and operating performance.

Key Features

  • Remanufactured Original Equipment-style fit for Pontiac Bonneville applications
  • New spool valve seals and rack donut seals installed where applicable to reduce internal leakage
  • 100% replacement of rubber sealing components
  • Specialized lubricant applied for extended service life
  • Factory test drive performed under simulated extreme operating conditions
  • Protective coating helps resist corrosion and rust
  • Includes tie rod ends and sealing kit
  • Black finish with steel and aluminum construction

Product Details

CARDONE Part Number 22-1001 is a remanufactured rack and pinion assembly engineered for direct replacement on 2001-2005 Pontiac Bonneville vehicles. The unit measures 50.75 inches in rack length, uses an O-ring hose port type, and features M18 x 1.5 pressure port and M16 x 1.5 return port thread sizes. With 2.75 total turns lock to lock and a 16.75-inch mounting hole spacing, it is built to match the original steering geometry for the listed application. This part cross-references Pontiac 26084647 and 26088334 for the same application.

Common Steering Issues It Can Address

  • Excessive steering play or loose steering feel
  • Internal rack leakage causing fluid loss or poor assist
  • Hard steering after startup or inconsistent assist
  • Steering that does not return to center properly after a turn
  • Noise caused by worn internal seals or air in the steering system

Installation Notes and Tips

Fits 2001-2005 Pontiac Bonneville, without Magnetic Speed Variable Assist Steering (NV8); includes inner tie rods; in-line filter available. For warranty purposes, install a filter, use the suggested OE fluid, and flush the system before returning the vehicle to service. Option codes are listed on the Service Parts Identification sticker. After installation, bleed the steering system completely and verify alignment, return-to-center action, and fluid flow through the return line.

Quality Assurance

Each CARDONE rack and pinion assembly undergoes a factory test drive that simulates demanding operating conditions while checking on-car communications. The remanufacturing process replaces sealing components, applies specialized lubricant, and uses a protective coating to support durability and corrosion resistance. CARDONE’s process also reduces the energy and raw material needed to produce a new part by 80%.

This part fits 5 vehicles
Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
YearMakeModelPositionNotes
2005PontiacBonnevilleN/Awithout Magnetic Speed Variable Assist Steering (NV8); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Option Codes are on the Service Parts Identification Sticker; with Hydraulic Power; Rack and Pinion Assembly
2004PontiacBonnevilleN/Awithout Magnetic Speed Variable Assist Steering (NV8); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Option Codes are on the Service Parts Identification Sticker; with Hydraulic Power; Rack and Pinion Assembly
2003PontiacBonnevilleN/Awithout Magnetic Speed Variable Assist Steering (NV8); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Option Codes are on the Service Parts Identification Sticker; with Hydraulic Power; Rack and Pinion Assembly
2002PontiacBonnevilleN/Awithout Magnetic Speed Variable Assist Steering (NV8); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Option Codes are on the Service Parts Identification Sticker; with Hydraulic Power; Rack and Pinion Assembly
2001PontiacBonnevilleN/Awithout Magnetic Speed Variable Assist Steering (NV8); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Option Codes are on the Service Parts Identification Sticker; with Hydraulic Power; Rack and Pinion Assembly
Directly replaces or cross-references 3 part numbers
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.
Pontiac — 26084647Pontiac — 26088334Pontiac — 26099979