/live/media/A1/A1_221004_Fro.jpg)
Cardone 22-1004 Rack and Pinion Assembly
| Brand | Cardone 22-1004 |
|---|---|
| Casting Material | Steel; Aluminum |
| Distance Between Mounting Holes (in) | 16.75 |
| Distance Between Mounting Holes (mm) | 425.45 |
| E-Waste | No |
| Hose Port Type | O-Ring |
| Input Shaft Diameter (in) | 0.79 |
| Input Shaft Diameter (mm) | 19.94 |
| Input Shaft Length (in) | 1.75 |
| Input Shaft Length (mm) | 44.45 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and Pinion, Sealing Kit, Instruction Sheet |
| Pressure Port Thread Size | M18 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 50.75 |
| Rack Length (mm) | 1289.05 |
| Return Port ID Size | 0.24 |
| Return Port Thread Size | M16 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.44 |
| Thread Length (mm) | 61.98 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 2.69 |
| Product line | Rack and Pinion Assembly |
| Fits | Buick · 10 vehicles |
Remanufactured OE part. Delivers a precise fit with factory-tested performance.
Protective coating. Helps resist corrosion and rust for longer service life.
New sealing components. Replaced seals help eliminate internal leaks.
Cross-references Buick 26087416 and Buick 26099975 for the same application. See all 2.
Remanufactured Steering Rack for Buick LeSabre and Park Avenue
The Cardone 22-1004 rack and pinion assembly is a remanufactured steering replacement built for Buick LeSabre and Buick Park Avenue applications. It combines OE-style fitment with new sealing components, specialized lubricant, and factory testing to support consistent steering response.
Key Features
- Remanufactured Original Equipment-style rack and pinion assembly for direct vehicle fit
- Brand-new rubber sealing components installed to reduce internal leakage
- All new spool valve seals and rack donut seals installed where applicable
- Factory test drive performed to verify operation under demanding conditions and confirm on-car communications
- Protective coating helps resist corrosion and rust
- Specialized lubricant applied for extended service life
- Includes tie rod ends and sealing kit
- Black steering rack with steel and aluminum casting materials
Product Details
Cardone Rack and Pinion Assembly 22-1004 is remanufactured to rigorous quality and performance standards and finished for long-term durability. The unit uses O-ring hose ports, M18 x 1.5 pressure port threads, and M16 x 1.5 return port threads. It measures 50.75 inches in rack length, has a 16.75-inch mounting hole spacing, and a 2.69 lock-to-lock turn ratio. This part cross-references Buick OE numbers 26087416 and 26099975 for the same application.
Compatible With 2001-2005 Buick LeSabre, N/A; 2001-2002 Buick Park Avenue, N/A; and 2003-2005 Buick Park Avenue, N/A. For Park Avenue applications, notes specify use without Magnetic Speed Variable Assist Steering (NV8), with hydraulic power, and with inner tie rods.
Common Steering Issues This Part Addresses
- Hard steering during the first few minutes of driving
- Internal fluid bypass caused by worn rack seals
- Steering that does not return to center after a turn
- Power steering pump noise related to air in the system after service
- Leakage from worn spool valve or rack seals
Installation Notes
- Flush the hydraulic power steering system during installation
- Use OE-specified fluid for Buick LeSabre and Park Avenue applications
- Install an in-line filter where recommended in the fitment notes
- Bleed the steering system completely to remove trapped air
- Check front-end alignment and return-line routing if steering does not self-center
Quality Assurance
Each Cardone electronic power steering rack and pinion is remanufactured with new premium components and tested on a factory drive cycle that simulates extreme operating conditions. The process replaces all rubber sealing components and applies specialized lubricant to support durability and reliable operation.
| Year | Make | Model | Submodel | Position | Notes |
|---|---|---|---|---|---|
| 2005 | Buick | LeSabre | — | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2005 | Buick | Park Avenue | Base | N/A | without Magnetic Speed Variable Assist Steering (NV8); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2004 | Buick | LeSabre | — | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2004 | Buick | Park Avenue | Base | N/A | without Magnetic Speed Variable Assist Steering (NV8); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2003 | Buick | LeSabre | — | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2003 | Buick | Park Avenue | Base | N/A | without Magnetic Speed Variable Assist Steering (NV8); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2002 | Buick | LeSabre | — | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2002 | Buick | Park Avenue | Base | N/A | without Magnetic Speed Variable Assist Steering (NV8); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Option Codes are on the Service Parts Identification Sticker; with Hydraulic Power; Rack and Pinion Assembly |
| 2001 | Buick | LeSabre | — | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2001 | Buick | Park Avenue | Base | N/A | without Magnetic Speed Variable Assist Steering (NV8); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Option Codes are on the Service Parts Identification Sticker; with Hydraulic Power; Rack and Pinion Assembly |
| No rows match your filter. | |||||