/live/media/A1/A1_221012_Fro.jpg)
OE Quality
60-Day Returns
Cardone 22-1012 Rack and Pinion Assembly
Remanufactured Steering Rack for GM Full-Size Sedans
Cardone 22-1012 is a remanufactured electronic power steering rack and pinion assembly built for precise OE-style fit and dependable steering response. It is engineered for select Chevrolet Impala and Chevrolet Monte Carlo applications with hydraulic power steering, including models with sport or special ride and handling suspension packages.
Each Cardone rack and pinion assembly is rebuilt with new premium components, replaced rubber sealing parts, and a specialized lubricant to support long service life. The unit is factory test driven to verify operation under demanding conditions and confirm on-car communication where applicable.
Key Features
- Remanufactured Original Equipment-style rack and pinion assembly
- Fits Chevrolet Impala and Chevrolet Monte Carlo applications listed below
- Includes tie rod ends, mounting bushing assembly, sealing kit, and instruction sheet
- Steel and aluminum construction with protective black finish
- O-ring hose ports with M18 x 1.5 pressure port and M16 x 1.5 return port
- 2.31 total turns lock to lock for responsive steering feel
- Factory tested under simulated operating conditions
- Cross-reference part numbers include Chevrolet 19207777 and 88955466
Product Details
Cardone Rack and Pinion Assembly 22-1012 is designed for hydraulic power steering systems on 2004-2011 Chevrolet Impala and 2004-2007 Chevrolet Monte Carlo applications listed in the fitment data. The remanufacturing process replaces all rubber sealing components, installs new spool valve seals and rack donut seals where applicable, and applies a specialized lubricant to help extend service life. A polished micro-finish sleeve is used in the valve housing where applicable, and the finished unit receives a protective coating to resist corrosion and rust.
This part is built to restore steering precision in vehicles that need a direct replacement rack for OE-style geometry and communication. Cardone 22-1012 is a practical choice for Chevrolet Impala and Chevrolet Monte Carlo owners looking for a remanufactured steering rack that matches the original application requirements.
Common Issues This Part Can Address
- Hard steering during the first few minutes of driving
- Power steering fluid leaks from worn internal seals
- Steering that does not return to center after a turn
- Power steering pump whine caused by air in the system after service
- Internal bypass or pressure loss from worn spool valve sealing surfaces
Installation Notes
- Fits 2008-2011 Chevrolet Impala, N/A, with Sport Suspension (FE3); includes inner tie rods; hydraulic power
- Fits 2006-2007 Chevrolet Impala, N/A; install an in-line filter and use OE fluid; flush the hydraulic power system during installation
- Fits 2006-2007 Chevrolet Monte Carlo, N/A; install an in-line filter and use OE fluid; flush the hydraulic power system during installation
- Fits 2004-2005 Chevrolet Impala, N/A, with Special Ride, Handling Suspension (FE4); includes inner tie rods; hydraulic power
- Fits 2004-2005 Chevrolet Monte Carlo, N/A, with Special Ride, Handling Suspension (FE4); includes inner tie rods; hydraulic power
For warranty validation on the listed hydraulic applications, install the recommended in-line filter where noted and flush the system with the suggested OE fluid. If the steering wheel does not return to center after installation, check front-end alignment first, then inspect the return line for restriction or kinks.
Quality Assurance
Cardone remanufactures this rack and pinion assembly to rigorous quality and performance standards, then factory test drives each unit to verify operation under extreme conditions. The process uses new premium components, replaced sealing parts, and corrosion-resistant finishing to support reliable service in the Chevrolet Impala and Chevrolet Monte Carlo applications listed above.
| Brand | Cardone |
|---|---|
| Part Number | 22-1012 |
| Position | Rack and Pinion Assembly |
| Casting Material | Steel; Aluminum |
| Distance Between Mounting Holes (in) | 12.25 |
| Distance Between Mounting Holes (mm) | 311.15 |
| E-Waste | No |
| Hose Port Type | O-Ring |
| Input Shaft Diameter (in) | 0.79 |
| Input Shaft Diameter (mm) | 19.94 |
| Input Shaft Length (in) | 1.75 |
| Input Shaft Length (mm) | 44.45 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and Pinion, Mounting Bushing Assembly, Sealing Kit, Instruction Sheet |
| Pressure Port Thread Size | M18 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 48.75 |
| Rack Length (mm) | 1238.25 |
| Return Port Thread Size | M16 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.44 |
| Thread Length (mm) | 62.08 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 2.31 |
This part fits 12 vehicles. Search below:
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2011 | Chevrolet | Impala | N/A | with Sport Suspension ( (FE3) ); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Option Codes are on the Service Parts Identification Sticker; with Hydraulic Power; Rack and Pinion Assembly | ||
| 2010 | Chevrolet | Impala | N/A | with Sport Suspension ( (FE3) ); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Option Codes are on the Service Parts Identification Sticker; with Hydraulic Power; Rack and Pinion Assembly | ||
| 2009 | Chevrolet | Impala | N/A | with Sport Suspension ( (FE3) ); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Option Codes are on the Service Parts Identification Sticker; with Hydraulic Power; Rack and Pinion Assembly | ||
| 2008 | Chevrolet | Impala | N/A | with Sport Suspension ( (FE3) ); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Option Codes are on the Service Parts Identification Sticker; with Hydraulic Power; Rack and Pinion Assembly | ||
| 2007 | Chevrolet | Impala | 5.3L | V8 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2007 | Chevrolet | Monte Carlo | 5.3L | V8 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2006 | Chevrolet | Impala | 5.3L | V8 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2006 | Chevrolet | Monte Carlo | 5.3L | V8 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2005 | Chevrolet | Impala | N/A | with Special Ride, Handling Suspension ( (FE4) ); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly | ||
| 2005 | Chevrolet | Monte Carlo | N/A | with Special Ride, Handling Suspension ( (FE4) ); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly | ||
| 2004 | Chevrolet | Impala | N/A | with Special Ride, Handling Suspension ( (FE4) ); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly | ||
| 2004 | Chevrolet | Monte Carlo | N/A | with Special Ride, Handling Suspension ( (FE4) ); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.