Cardone
Rack and Pinion Assembly

Cardone 22-133 Rack and Pinion Assembly

Brand Cardone 22-133
Casting Material Steel; Aluminum
Distance Between Mounting Holes (in) 1.69
Distance Between Mounting Holes (mm) 42.85
E-Waste No
Hose Port Type O-Ring
Input Shaft Diameter (in) 0.66
Input Shaft Diameter (mm) 16.71
Input Shaft Length (in) 1.13
Input Shaft Length (mm) 28.58
Number of Mounting Holes 5
Package Contents Rack and Pinion, Sealing Kit, Instruction Sheet
Pressure Port Thread Size M18 x 1.5
Product Condition Remanufactured
Rack Length (in) 49.50
Rack Length (mm) 1257.30
Return Port Thread Size M16 x 1.5
Steering Rack Color Black
Thread Length (in) 2.50
Thread Length (mm) 63.50
Tie Rod Ends Included Yes
Total Turns Lock to Lock 2.75
Product line Rack and Pinion Assembly
Fits Cadillac · 9 vehicles

Remanufactured OE part. Built to original equipment standards for a precise, direct replacement.

Factory-tested. Each unit is driven through extreme conditions to verify communication and performance.

New sealing components. Fresh seals and specialized lubricant help reduce leaks and extend service life.

Cross-references Cadillac 26045893 for the same application. See all 1.

$176.00Free shipping
Out of stock
Step 1 — Confirm fitment
Free return shipping if it doesn't fit when you check fitment here first.
Select your vehicle to confirm fitment
Verify this part fits before purchasing — free returns if it doesn't
Step 2 — Quantity
Order total $176.00
Free shipping to the continental U.S.
Free returns within 60 days if it doesn't fit when fitment is verified.

Remanufactured Electronic Power Steering Rack

CARDONE 22-133 is a remanufactured rack and pinion assembly built for precise steering response and OE-style fitment. It is engineered for select Cadillac applications, including 1993 Cadillac Allante, 1993-1995 Cadillac Eldorado, 1993-1995 Cadillac Seville, and 1994-1995 Cadillac DeVille.

The CARDONE Rack and Pinion Assembly line focuses on restored steering performance with new sealing components, protective finishing, and factory-level testing. Part number 22-133 is built to match the original vehicle layout while supporting reliable hydraulic steering operation.

  • Remanufactured Original Equipment-style rack and pinion assembly
  • Fits Cadillac DeVille, Eldorado, Seville, and Allante applications listed above
  • 100% replacement of rubber sealing components
  • New spool valve seals and rack donut seals installed where applicable
  • Specialized lubricant applied for extended service life
  • Protective coating helps resist corrosion and rust
  • Factory test drive verifies operation under demanding conditions
  • Includes rack and pinion, sealing kit, and instruction sheet
  • Black steering rack with steel and aluminum construction
  • O-ring hose ports with M18 x 1.5 pressure port and M16 x 1.5 return port
  • Includes inner tie rods; tie rod ends included

Detailed Product Overview

This CARDONE 22-133 rack and pinion assembly is remanufactured to rigorous quality and performance standards using brand-new premium components where needed. The unit is tested to confirm on-car communication and steering function, and the remanufacturing process replaces all rubber sealing components to help reduce internal leakage. For Cadillac DeVille, Eldorado, Seville, and Allante owners, this part number 22-133 provides a direct replacement solution for worn or leaking steering racks.

This part cross-references Cadillac 26045893 for the same application.

Common Steering Problems It Can Address

  • Steering play or loose steering feel
  • Power steering fluid leaks from the rack housing or seals
  • Hard steering after startup or during initial driving
  • Noise caused by internal bypass or worn rack seals
  • Steering that does not return smoothly after a turn

Installation Notes and Tips

Compatible With 1993 Cadillac Allante, 1993-1995 Cadillac Eldorado, 1993-1995 Cadillac Seville, and 1994-1995 Cadillac DeVille. These applications are supplied without the EVO component. CARDONE recommends installing an in-line filter, using OE fluid, and flushing the hydraulic power steering system before operation. The steering system must be bled completely after installation to remove air and reduce pump whine.

If the vehicle does not return to center after installation, inspect front-end alignment and check the return line for restriction or kinking. For symptoms that appear only when cold and improve as the unit warms up, the rack may be experiencing internal bypass from worn sealing surfaces.

Quality Assurance

Each CARDONE Electronic Power Steering Rack and Pinion undergoes a factory test drive that simulates extreme operating conditions while checking on-car communications. The remanufacturing process is designed to reduce energy and raw material use compared with producing a new part, while delivering a restored steering component built to OE fit standards.

This part fits 9 vehicles
Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
YearMakeModelPositionNotes
1995CadillacDeVilleN/ASupplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; Recommended to always install a filter and use OE Fluid for warranty purposes; Flush the system with Hydraulic Power.; Rack and Pinion Assembly
1995CadillacEldoradoN/ASupplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; Recommended to always install a filter and use OE Fluid for warranty purposes; Flush the system with Hydraulic Power.; Rack and Pinion Assembly
1995CadillacSevilleN/ASupplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; Recommended to always install a filter and use OE Fluid for warranty purposes; Flush the system with Hydraulic Power.; Rack and Pinion Assembly
1994CadillacDeVilleN/ASupplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; Recommended to always install a filter and use OE Fluid for warranty purposes; Flush the system with Hydraulic Power.; Rack and Pinion Assembly
1994CadillacEldoradoN/ASupplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; Recommended to always install a filter and use OE Fluid for warranty purposes; Flush the system with Hydraulic Power.; Rack and Pinion Assembly
1994CadillacSevilleN/ASupplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; Recommended to always install a filter and use OE Fluid for warranty purposes; Flush the system with Hydraulic Power.; Rack and Pinion Assembly
1993CadillacAllanteN/ASupplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; Recommended to always install a filter and use OE Fluid for warranty purposes; Flush the system with Hydraulic Power.; Rack and Pinion Assembly
1993CadillacEldoradoN/ASupplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; Recommended to always install a filter and use OE Fluid for warranty purposes; Flush the system with Hydraulic Power.; Rack and Pinion Assembly
1993CadillacSevilleN/ASupplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; Recommended to always install a filter and use OE Fluid for warranty purposes; Flush the system with Hydraulic Power.; Rack and Pinion Assembly
Directly replaces or cross-references 1 part number
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.
Cadillac — 26045893