/live/media/A1/A1_22157_Fro.jpg)
Cardone 22-157 Rack and Pinion Assembly
| Brand | Cardone 22-157 |
|---|---|
| Casting Material | Steel; Aluminum |
| Distance Between Mounting Holes (in) | 1.69 |
| Distance Between Mounting Holes (mm) | 42.85 |
| E-Waste | No |
| Hose Port Type | O-Ring |
| Input Shaft Diameter (in) | 0.66 |
| Input Shaft Diameter (mm) | 16.79 |
| Input Shaft Length (in) | 1.88 |
| Input Shaft Length (mm) | 47.63 |
| Number of Mounting Holes | 5 |
| Package Contents | Rack and Pinion, Sealing Kit, Instruction Sheet |
| Pressure Port Thread Size | M18 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 49.75 |
| Rack Length (mm) | 1263.65 |
| Return Port Thread Size | M16 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.41 |
| Thread Length (mm) | 61.09 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 2.75 |
| Product line | Rack and Pinion Assembly |
| Fits | Cadillac · 3 vehicles |
Remanufactured OE part. Built to original equipment standards for a precise replacement fit.
Factory-tested performance. Each unit is driven under extreme conditions to verify communication and function.
Protective coating. Helps resist corrosion and rust for longer service life.
Cross-references Cadillac 26047066 for the same application. See all 1.
Remanufactured Steering Rack for Cadillac
CARDONE 22-157 is a remanufactured electronic power steering rack and pinion assembly built for direct replacement in select 1996 Cadillac DeVille, Eldorado, and Seville applications. It combines OE fitment with new sealing components and factory testing to support consistent steering response.
Key Features
- Remanufactured Original Equipment-style rack and pinion assembly for a precise vehicle fit
- Fits 1996 Cadillac DeVille, 1996 Cadillac Eldorado, and 1996 Cadillac Seville
- New spool valve seals and rack donut seals installed to reduce internal leakage where applicable
- 100% replacement of rubber sealing components
- Specialized lubricant applied for extended service life
- Factory test drive performed under extreme operating conditions while verifying on-car communications
- Protective coating helps resist corrosion and rust
- Includes rack and pinion, sealing kit, and instruction sheet
- Part number 22-157 for ordering and catalog lookup
Product Details
This CARDONE Rack and Pinion Assembly is engineered for Cadillac steering systems that require a remanufactured replacement with OE-style dimensions and connections. It features a steel and aluminum casting, O-ring hose ports, M18 x 1.5 pressure port threads, M16 x 1.5 return port threads, and a 49.75-inch rack length. The unit also includes tie rod ends and is finished in black for a clean replacement appearance. CARDONE’s remanufacturing process replaces rubber sealing components, applies specialized lubricant, and verifies operation through factory testing to help restore steering performance on 1996 Cadillac DeVille, Eldorado, and Seville models. If you are searching for CARDONE 22-157 rack and pinion assembly for 1996 Cadillac DeVille or 1996 Cadillac Seville steering repair, this part is built for that application.
What It Can Help Fix
- Hard steering during the first few minutes of driving
- Internal fluid bypass caused by worn rack seals
- Power steering pump whine related to air in the system after service
- Steering that does not return to center due to restricted return flow or alignment issues
- Leakage from worn spool valve or rack seals
Installation Notes and Tips
Before installation, flush the hydraulic power steering system and bleed it completely to remove air. CARDONE recommends using OE fluid and installing an in-line filter where available to help protect the replacement rack. Check front-end alignment after installation, and inspect the return line for kinks or restrictions if the steering does not return to center. For 1996 Cadillac DeVille, Eldorado, and Seville applications, confirm the vehicle does not require an EVO component before ordering part number 22-157.
Quality Assurance
Each CARDONE electronic power steering rack and pinion assembly is remanufactured to rigorous quality and performance standards and factory test driven to verify operation and communication. The process uses new premium components, replaced sealing parts, and protective finishing to support reliable service in daily driving conditions.
This part cross-references Cadillac OE number 26047066 for the same application.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1996 | Cadillac | DeVille | N/A | Supplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; Recommended to always install a filter and use OE Fluid for warranty purposes; Flush the system with Hydraulic Power.; Rack and Pinion Assembly |
| 1996 | Cadillac | Eldorado | N/A | Supplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; Recommended to always install a filter and use OE Fluid for warranty purposes; Flush the system with Hydraulic Power.; Rack and Pinion Assembly |
| 1996 | Cadillac | Seville | N/A | Supplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; Recommended to always install a filter and use OE Fluid for warranty purposes; Flush the system with Hydraulic Power.; Rack and Pinion Assembly |
| No rows match your filter. | ||||