/live/media/A1/A1_222029_Fro.jpg)
Cardone 22-2029 Rack and Pinion Assembly
| Brand | Cardone 22-2029 |
|---|---|
| Casting Material | Aluminum |
| Distance Between Mounting Holes (in) | 15.69 |
| Distance Between Mounting Holes (mm) | 398.48 |
| E-Waste | No |
| Hose Port Type | O-Ring |
| Input Shaft Diameter (in) | 0.73 |
| Input Shaft Diameter (mm) | 18.42 |
| Input Shaft Length (in) | 1.38 |
| Input Shaft Length (mm) | 34.93 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and Pinion, Sealing Kit, Instruction Sheet |
| Pressure Port ID Size | 0.437 |
| Product Condition | Remanufactured |
| Rack Length (in) | 51.06 |
| Rack Length (mm) | 1297.00 |
| Return Port ID Size | 0.376 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.59 |
| Thread Length (mm) | 65.76 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 2.69 |
| Product line | Rack and Pinion Assembly |
| Fits | Ford · 12 vehicles |
Remanufactured OE replacement. Built to original equipment standards for a precise fit and dependable performance.
All-new sealing components. Replaced rubber seals help eliminate internal leaks and extend service life.
Factory tested. Each unit is driven through extreme conditions to verify communication and operation.
Cross-references Ford 9S4Z3280B, Ford 9S4Z3504B and Ford 964Z3504B for the same application. See all 3.
Remanufactured Steering Rack for Focus
Cardone 22-2029 is a remanufactured electronic power steering rack and pinion assembly built for direct replacement on select Ford Focus applications. It is engineered for 2009-2011 Ford Focus models with variable ratio steering and hydraulic power steering, including inner tie rods and an in-line filter note for service planning.
The Cardone rack and pinion assembly line focuses on OE-style fit and restored steering performance. Part number 22-2029 uses new premium components, replaced rubber sealing parts, and a specialized lubricant to support long-term operation in daily driving conditions.
Key Features
- Remanufactured Original Equipment-style rack and pinion assembly
- Fits 2009-2011 Ford Focus, N/A, with Variable Ratio Steering
- Includes inner tie rods
- All rubber sealing components replaced
- New spool valve seals and rack donut seals installed where applicable
- Factory test driven under simulated extreme operating conditions
- Protective coating helps resist corrosion and rust
- Aluminum casting material with black finish
- Package contents: rack and pinion, sealing kit, instruction sheet
Product Details
Cardone 22-2029 is a remanufactured rack and pinion assembly for the Ford Focus steering system. It is built to restore steering response, hydraulic assist, and on-car communication performance after wear-related failure. The assembly measures 51.06 inches in rack length, has a 15.69-inch mounting hole spacing, an O-ring hose port type, and a total lock-to-lock turn count of 2.69. This part cross-references Ford 9S4Z3280B and 9S4Z3504B for the same application.
Common Issues This Part Can Address
- Hard steering during the first few minutes of driving
- Power steering pump whine caused by air in the system after service
- Steering that does not return to center after a turn
- Internal fluid bypass from worn spool valve sealing surfaces
- Leaks from aged rack seals or sealing components
Installation Notes
Fits 2009-2011 Ford Focus, N/A, with Variable Ratio Steering and hydraulic power steering. For warranty purposes, Cardone recommends installing an in-line filter, using the suggested OE fluid, and flushing the system before operation. The steering system must be bled completely after installation to remove trapped air and reduce pump noise. If the vehicle does not return to center, inspect front-end alignment and check the return line for restriction or kinking.
Quality Assurance
Each Cardone electronic power steering rack and pinion undergoes a factory test drive that simulates demanding operating conditions while verifying on-car communications. The remanufacturing process replaces sealing components, applies specialized lubricant, and uses new premium parts to support reliable service life. The process also reduces the energy and raw material needed to produce a new part by up to 80%.
| Year | Make | Model | Submodel | Position | Notes |
|---|---|---|---|---|---|
| 2011 | Ford | Focus | SES | N/A | with Variable Ratio Steering; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2011 | Ford | Focus | S | N/A | with Variable Ratio Steering; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2011 | Ford | Focus | SE | N/A | with Variable Ratio Steering; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2011 | Ford | Focus | SEL | N/A | with Variable Ratio Steering; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2010 | Ford | Focus | SES | N/A | with Variable Ratio Steering; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2010 | Ford | Focus | S | N/A | with Variable Ratio Steering; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2010 | Ford | Focus | SE | N/A | with Variable Ratio Steering; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2010 | Ford | Focus | SEL | N/A | with Variable Ratio Steering; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2009 | Ford | Focus | SES | N/A | with Variable Ratio Steering; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2009 | Ford | Focus | S | N/A | with Variable Ratio Steering; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2009 | Ford | Focus | SE | N/A | with Variable Ratio Steering; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2009 | Ford | Focus | SEL | N/A | with Variable Ratio Steering; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| No rows match your filter. | |||||