/live/media/A1/A1_22253_Fro.jpg)
Cardone 22-253 Rack and Pinion Assembly
| Brand | Cardone 22-253 |
|---|---|
| Casting Material | Aluminum |
| Distance Between Mounting Holes (in) | 11.13 |
| Distance Between Mounting Holes (mm) | 282.58 |
| E-Waste | No |
| Hose Port Type | Teflon |
| Input Shaft Diameter (in) | 0.73 |
| Input Shaft Diameter (mm) | 18.42 |
| Input Shaft Length (in) | 1.50 |
| Input Shaft Length (mm) | 38.10 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and Pinion, Sealing Kit, Instruction Sheet |
| Pressure Port Thread Size | M16 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 44.75 |
| Rack Length (mm) | 1136.65 |
| Return Port Thread Size | M16 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.33 |
| Thread Length (mm) | 59.18 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 2.63 |
| Product line | Rack and Pinion Assembly |
| Fits | Ford, Lincoln, and Jaguar · 8 vehicles |
Remanufactured OE part. Built to original equipment standards for a precise fit and dependable performance.
Factory-tested. Each unit is driven under extreme conditions to verify on-car communications.
Aluminum housing. Lightweight construction with protective coating helps resist corrosion and rust.
Cross-references Chrysler 4764403AE, Ford 1W6Z3504AARM and Ford XR87387N for the same application. See all 15.
Remanufactured Electronic Power Steering Rack
CARDONE 22-253 is a remanufactured rack and pinion assembly built for precise steering response and OE-style fit. It is engineered for select Ford Thunderbird, Lincoln LS, and Jaguar S-Type applications, including models with hydraulic power steering and inner tie rods.
The CARDONE rack and pinion line focuses on restored steering performance with new sealing components, protective finishing, and factory testing. For drivers searching for a remanufactured steering rack for a 2000-2002 Lincoln LS or a 2000-2001 Jaguar S-Type, this part number 22-253 is built to match the original vehicle layout.
Key Features
- Remanufactured Original Equipment-style rack and pinion assembly
- Brand-new rubber sealing components installed
- New spool valve seals and rack donut seals where applicable
- Specialized lubricant applied for extended service life
- Factory test drive performed under simulated operating conditions
- Protective coating helps resist corrosion and rust
- Aluminum housing with black finish
- Tie rod ends included
Product Details
This CARDONE rack and pinion assembly 22-253 is remanufactured to rigorous quality and performance standards, then tested to verify on-car communication and operation. The unit uses a 44.75-inch rack length, M16 x 1.5 pressure and return ports, and a 2.63 total turns lock to lock. It is built with a 0.73-inch input shaft diameter and comes with a sealing kit and instruction sheet. For fitment-based searches, this assembly is listed for 2003 Ford Thunderbird, 2002 Ford Thunderbird, 2000-2002 Lincoln LS, and 2000-2001 Jaguar S-Type.
This part cross-references Ford 1W6Z3504AARM for the same application.
Common Steering Issues It May Address
- Excessive steering play or loose steering feel
- Fluid leakage from worn rack seals
- Hard steering after startup or during cold operation
- Steering that does not return to center properly
- Noise caused by internal bypass or worn hydraulic components
Installation Notes
- Fits 2003 Ford Thunderbird, N/A; supplied without EVO component; before 11/18/2002; includes inner tie rods; with hydraulic power.
- Fits 2002 Ford Thunderbird, N/A; supplied without EVO component; includes inner tie rods; with hydraulic power.
- Fits 2000-2002 Lincoln LS, N/A; supplied without EVO component; includes inner tie rods; with hydraulic power.
- Fits 2000-2001 Jaguar S-Type, N/A; install an in-line filter and use OE fluid; flush the hydraulic power steering system during installation.
- Bleed the steering system completely after installation to remove air and reduce pump whine.
- Check front-end alignment and inspect return lines if the steering does not return to center.
Quality Assurance
Each unit undergoes CARDONE’s factory test drive process to simulate demanding operating conditions and confirm on-car communication. The remanufacturing process replaces all rubber sealing components and uses specialized lubricant to support durability, while the earth-friendly process reduces energy and raw material use compared with manufacturing a new part.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2003 | Ford | Thunderbird | N/A | Supplied without EVO Component; Before 11/18/2002; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2003 | Lincoln | LS | N/A | Supplied without EVO Component; Before 11/18/2002; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2002 | Ford | Thunderbird | N/A | Supplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; Recommended to always install a filter and use OE Fluid for warranty purposes; Flush the system with Hydraulic Power.; Rack and Pinion Assembly |
| 2002 | Lincoln | LS | N/A | Supplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; Recommended to always install a filter and use OE Fluid for warranty purposes; Flush the system with Hydraulic Power.; Rack and Pinion Assembly |
| 2001 | Jaguar | S-Type | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2001 | Lincoln | LS | N/A | Supplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; Recommended to always install a filter and use OE Fluid for warranty purposes; Flush the system with Hydraulic Power.; Rack and Pinion Assembly |
| 2000 | Jaguar | S-Type | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2000 | Lincoln | LS | N/A | Supplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; Recommended to always install a filter and use OE Fluid for warranty purposes; Flush the system with Hydraulic Power.; Rack and Pinion Assembly |
| No rows match your filter. | ||||