/live/media/A1/A1_22260E_Fro.jpg)
Cardone 22-260E Rack and Pinion Assembly
| Brand | Cardone 22-260E |
|---|---|
| Casting Material | Steel; Aluminum |
| Distance Between Mounting Holes (in) | 17.50 |
| Distance Between Mounting Holes (mm) | 444.50 |
| E-Waste | Yes |
| Hose Port Type | O-Ring |
| Input Shaft Diameter (in) | 0.73 |
| Input Shaft Diameter (mm) | 18.42 |
| Input Shaft Length (in) | 1.81 |
| Input Shaft Length (mm) | 46.05 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and Pinion, Sealing Kit, Instruction Sheet |
| Pressure Port ID Size | 0.24 |
| Product Condition | Remanufactured |
| Rack Length (in) | 56.75 |
| Rack Length (mm) | 1441.45 |
| Return Port ID Size | 0.24 |
| Steering Rack Color | Black |
| Thread Length (in) | 3.23 |
| Thread Length (mm) | 82.04 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 3.25 |
| Product line | Rack and Pinion Assembly |
| Fits | Lincoln · 4 vehicles |
Remanufactured OE part. Built to rigorous quality and performance standards for a precise replacement.
Factory test driven. Each unit is verified under extreme operating conditions and on-car communications.
New sealing components. All rubber seals are replaced to help eliminate internal leaks and extend service life.
Cross-references Lincoln 2L1Z3280FA, Lincoln 2L1Z3280GA and Lincoln 2L7Z3504CARM for the same application. See all 6.
Electronic Power Steering Rack for Navigator
Restore steering response with this remanufactured Cardone rack and pinion assembly for the Lincoln Navigator. Cardone Part Number 22-260E is built with new sealing components, specialized lubricant, and factory testing to support dependable operation in hydraulic power steering systems.
Key Features
- Remanufactured Original Equipment-style rack and pinion assembly for a precise vehicle fit
- Fits 2003-2006 Lincoln Navigator, N/A
- Includes inner tie rods and a sealing kit
- All rubber sealing components are replaced during remanufacturing
- New spool valve seals and rack donut seals help reduce internal leakage
- Factory test driven to verify operation under demanding conditions and on-car communications
- Protective coating helps resist corrosion and rust
- Finished with specialized lubricant for extended service life
Detailed Description
Cardone 22-260E is a remanufactured rack and pinion assembly for the Lincoln Navigator, engineered for hydraulic power steering applications. The unit is rebuilt with premium replacement components, including new seals and a protective finish, then tested to confirm performance before it leaves the factory. This Cardone rack and pinion assembly is intended for 2003-2006 Lincoln Navigator models supplied with an Electronic Variable Orifice (EVO) component and includes inner tie rods.
The Cardone Rack and Pinion Assembly line focuses on OE-style fitment and remanufactured durability. For buyers searching for a 2003-2006 Lincoln Navigator rack and pinion assembly, Cardone Part Number 22-260E provides a direct replacement option backed by a controlled remanufacturing process. This part cross-references Lincoln OE numbers such as 2L1Z3280FA and 4L7Z3504AA for the same application.
Common Steering Issues This Part Addresses
- Excessive steering play or loose steering feel
- Internal fluid leakage in the steering gear
- Hard steering after startup or inconsistent assist
- Noise caused by worn rack seals or bypassing fluid
- Poor steering return caused by a worn or restricted rack assembly
Installation Notes and Tips
Fits 2003-2006 Lincoln Navigator, N/A. For warranty purposes, Cardone recommends installing an in-line filter, using the suggested OE fluid, and flushing the steering system during service. Proper bleeding is important after installation to remove air from the hydraulic system and reduce pump whine. Verify front-end alignment and inspect return-line routing if steering does not return to center.
Quality Assurance
Each Cardone 22-260E rack and pinion assembly is remanufactured to rigorous quality and performance standards and factory test driven to verify operation under extreme conditions. The process replaces rubber sealing components, uses specialized lubricant, and applies a protective coating to support long-term reliability. The remanufacturing process also reduces energy and raw material use compared with producing a new part.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2006 | Lincoln | Navigator | N/A | Supplied with Electronic Variable Orifice (EVO) Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2005 | Lincoln | Navigator | N/A | Supplied with Electronic Variable Orifice (EVO) Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2004 | Lincoln | Navigator | N/A | Supplied with Electronic Variable Orifice (EVO) Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2003 | Lincoln | Navigator | N/A | Supplied with Electronic Variable Orifice (EVO) Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| No rows match your filter. | ||||