/live/media/A1/A1_22265_Fro.jpg)
Cardone 22-265 Rack and Pinion Assembly
| Brand | Cardone 22-265 |
|---|---|
| Casting Material | Aluminum |
| Distance Between Mounting Holes (in) | 17.75 |
| Distance Between Mounting Holes (mm) | 450.85 |
| E-Waste | No |
| Hose Port Type | O-Ring |
| Input Shaft Diameter (in) | 0.73 |
| Input Shaft Diameter (mm) | 18.42 |
| Input Shaft Length (in) | 1.81 |
| Input Shaft Length (mm) | 46.05 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and Pinion, Sealing Kit, Instruction Sheet |
| Pressure Port ID Size | 0.24 |
| Product Condition | Remanufactured |
| Rack Length (in) | 50.00 |
| Rack Length (mm) | 1270.00 |
| Return Port ID Size | 0.24 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.50 |
| Thread Length (mm) | 63.50 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 3 |
| Product line | Rack and Pinion Assembly |
| Fits | Ford and Mazda · 8 vehicles |
Remanufactured OE part. Built to original equipment standards for a precise, direct-fit replacement.
New sealing components. All rubber seals are replaced to help eliminate internal leaks and restore reliable performance.
Factory tested. Each unit is driven under extreme conditions to verify operation and communications.
Cross-references Ford 3L8Z3504CARM, Ford EC0132110 and Ford YL8Z3280EA for the same application. See all 7.
Electronic Power Steering Rack Overview
Cardone 22-265 is a remanufactured electronic power steering rack and pinion assembly built for direct replacement in select Ford Escape and Mazda Tribute applications. It combines OE fitment with new sealing components, specialized lubricant, and factory testing to support consistent steering response.
This Cardone rack and pinion assembly is finished in black aluminum and includes tie rod ends, a sealing kit, and an instruction sheet. It is engineered for vehicles with hydraulic power steering and O-ring hose ports.
Key Features
- Remanufactured OE-style rack and pinion assembly for accurate vehicle fit
- Brand-new rubber sealing components installed throughout the unit
- New spool valve seals and rack donut seals help reduce internal leakage
- Specialized lubricant applied for extended service life
- Factory test driven under extreme operating conditions
- Protective coating helps resist corrosion and rust
- Aluminum casting with black finish
- Includes tie rod ends
Product Details
Cardone Rack and Pinion Assembly 22-265 is remanufactured to meet rigorous quality and performance standards. The unit is tested to verify on-car communications and steering operation, then finished with protective coating for durability. For drivers searching for a Ford Escape rack and pinion replacement or a Mazda Tribute steering rack assembly, this part provides a direct-fit solution for the listed applications.
This part cross-references Ford and Mazda OE numbers such as 3L8Z3504CARM and EC0132110 for the same application.
Common Steering Issues It Can Address
- Hard steering during the first few minutes of driving
- Power steering pump whine caused by air in the system after replacement
- Steering that does not return to center after a turn
- Internal bypass from worn spool valve sealing surfaces
- Fluid leakage from worn rack seals
Installation Notes
Fits 2004 Ford Escape, N/A; without P235/70R16 Tires; Before 12/22/2003; Includes Inner Tie Rods; In-Line Filter available; with Hydraulic Power. Fits 2001-2004 Mazda Tribute, N/A; with P215/70R16 Tires; Includes Inner Tie Rods; In-Line Filter available; with Hydraulic Power. Fits 2001-2003 Ford Escape, N/A; without P235/70R16 Tires; Includes Inner Tie Rods; In-Line Filter available; with Hydraulic Power.
Bleed the steering system completely after installation to remove air. Check front-end alignment and inspect the return line for restriction or kinks if the steering does not return to center. For warranty purposes, Cardone recommends installing an in-line filter and using the suggested OE fluid, then flushing the system.
Quality Assurance
Cardone remanufactures this electronic power steering rack and pinion using a process that replaces worn sealing components, applies specialized lubricant, and verifies operation through factory testing. The remanufacturing process also reduces the energy and raw material needed to produce a new part by 80%.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2004 | Ford | Escape | N/A | without P235/70R16 Tires; Before 12/22/2003; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2004 | Mazda | Tribute | N/A | with P215/70R16 Tires; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2003 | Ford | Escape | N/A | without P235/70R16 Tires; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2003 | Mazda | Tribute | N/A | with P215/70R16 Tires; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2002 | Ford | Escape | N/A | without P235/70R16 Tires; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2002 | Mazda | Tribute | N/A | with P215/70R16 Tires; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2001 | Ford | Escape | N/A | without P235/70R16 Tires; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2001 | Mazda | Tribute | N/A | with P215/70R16 Tires; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| No rows match your filter. | ||||