/live/media/A1/A1_22284E_Fro.jpg)
Cardone 22-284E Rack and Pinion Assembly
| Brand | Cardone 22-284E |
|---|---|
| Casting Material | Aluminum |
| Distance Between Mounting Holes (in) | 17.06 |
| Distance Between Mounting Holes (mm) | 433.40 |
| E-Waste | Yes |
| Hose Port Type | O-Ring |
| Input Shaft Diameter (in) | 0.91 |
| Input Shaft Diameter (mm) | 23.16 |
| Input Shaft Length (in) | 1.75 |
| Input Shaft Length (mm) | 44.45 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and Pinion, Sealing Kit, Instruction Sheet |
| Pressure Port ID Size | 0.436 |
| Product Condition | Remanufactured |
| Rack Length (in) | 38.50 |
| Rack Length (mm) | 977.90 |
| Return Port ID Size | 0.386 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.10 |
| Thread Length (mm) | 53.26 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 3.5 |
| Product line | Rack and Pinion Assembly |
| Fits | Cadillac · 6 vehicles |
OE direct replacement. Remanufactured to factory standards for a precise fit and dependable performance.
Aluminum housing. Lightweight construction with a protective coating to resist corrosion and rust.
Fresh sealing components. New seals and specialized lubricant help reduce leaks and extend service life.
Cross-references Cadillac 15257558 for the same application. See all 1.
Cardone Electronic Power Steering Rack
Cardone 22-284E is a remanufactured rack and pinion assembly for the 2004-2009 Cadillac SRX with hydraulic power steering and Electronic Variable Orifice (EVO) control. It is built with new sealing components, a protective finish, and factory testing to verify operation and on-car communication.
Key Features
- Remanufactured Original Equipment-style rack and pinion assembly for a precise vehicle fit
- Fits 2004-2009 Cadillac SRX, N/A, with hydraulic power steering
- Includes Electronic Variable Orifice (EVO) component and inner tie rods
- New spool valve seals and rack donut seals help reduce internal leakage
- Specialized lubricant applied for extended service life
- Factory test drive checks performance under demanding operating conditions
- Protective coating helps resist corrosion and rust
- Aluminum housing with black finish
Product Details
The Cardone Rack and Pinion Assembly, part number 22-284E, is remanufactured to meet rigorous quality and performance standards. It uses brand-new premium components where needed, including 100% replacement of rubber sealing parts, and the valve housings receive a polished micro-finish sleeve where applicable. This helps restore steering response and maintain consistent hydraulic operation in the Cadillac SRX platform. This part cross-references Cadillac 15257558 for the same application.
Common Steering Issues It Can Address
- Hard steering during the first few minutes of driving
- Internal fluid bypass caused by worn spool valve seals
- Steering that does not return to center after a turn
- Power steering pump whine caused by air in the system after service
- Corrosion-related wear on the steering rack housing
Installation Notes
For 2004-2009 Cadillac SRX rack and pinion replacement, follow the included instruction sheet and bleed the steering system completely after installation. Cardone recommends using the suggested OE fluid and flushing the system, and an in-line filter is available for warranty-related service guidance. Check front-end alignment after installation and inspect the return line for kinks or restrictions if the steering does not return to center.
Quality Assurance
Each Cardone 22-284E rack and pinion assembly undergoes a factory test drive that simulates extreme operating conditions while verifying on-car communications. The remanufacturing process also reduces the energy and raw material needed to produce a new part by 80%, supporting an earth-friendly repair approach.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2009 | Cadillac | SRX | N/A | Supplied with Electronic Variable Orifice (EVO) Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2008 | Cadillac | SRX | N/A | Supplied with Electronic Variable Orifice (EVO) Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2007 | Cadillac | SRX | N/A | Supplied with Electronic Variable Orifice (EVO) Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2006 | Cadillac | SRX | N/A | Supplied with Electronic Variable Orifice (EVO) Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2005 | Cadillac | SRX | N/A | Supplied with Electronic Variable Orifice (EVO) Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2004 | Cadillac | SRX | N/A | Supplied with Electronic Variable Orifice (EVO) Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| No rows match your filter. | ||||