/live/media/A1/A1_22288_Fro.jpg)
Cardone 22-288 Rack and Pinion Assembly
| Brand | Cardone 22-288 |
|---|---|
| Casting Material | Aluminum |
| Distance Between Mounting Holes (in) | 14.00 |
| Distance Between Mounting Holes (mm) | 355.60 |
| E-Waste | No |
| Hose Port Type | O-Ring |
| Input Shaft Diameter (in) | 0.73 |
| Input Shaft Diameter (mm) | 18.42 |
| Input Shaft Length (in) | 1.56 |
| Input Shaft Length (mm) | 39.67 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and Pinion, Sealing Kit, Instruction Sheet |
| Pressure Port ID Size | 0.436 |
| Product Condition | Remanufactured |
| Rack Length (in) | 54.25 |
| Rack Length (mm) | 1377.95 |
| Return Port ID Size | 0.386 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.56 |
| Thread Length (mm) | 65.10 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 3.13 |
| Product line | Rack and Pinion Assembly |
| Fits | Ford · 8 vehicles |
Remanufactured OE replacement. Built to original equipment standards for a precise fit and dependable performance.
Factory-tested assembly. Each unit is test-driven under extreme conditions to verify on-car communications.
Corrosion-resistant finish. Protective coating helps guard the housing against rust and wear.
Cross-references Ford 4R3Z3280A, Ford 4R3Z3280AA and Ford 4R3Z3504AA for the same application. See all 7.
Remanufactured Electronic Power Steering Rack
CARDONE 22-288 is a remanufactured rack and pinion assembly built for hydraulic power steering applications on select Ford Mustang models. It is finished in black with an aluminum casting, includes inner tie rods, and is rebuilt with new sealing components and specialized lubricant for long-term service.
This CARDONE Rack and Pinion Assembly is engineered for direct OE-style fitment on the Mustang platform, with a 54.25-inch rack length, O-ring hose ports, and a 3.13 lock-to-lock turn ratio. The 22-288 is remanufactured to restore steering response while maintaining factory-style vehicle communication and fit.
Key Features
- Remanufactured Original Equipment-style rack and pinion assembly
- Includes inner tie rods
- 100% replacement of rubber sealing components
- New spool valve seals and rack donut seals installed where applicable
- Specialized lubricant applied for extended service life
- Factory test driven under simulated extreme operating conditions
- Protective coating helps resist corrosion and rust
- Aluminum casting with black finish
Detailed Product Overview
CARDONE’s remanufacturing process focuses on restoring steering performance with premium replacement components and verified on-car communication testing. The 22-288 rack and pinion assembly is built for Ford Mustang applications that use hydraulic power steering, with fitment covering 2005-2007 Ford Mustang, 2008-2009 Ford Mustang with 16" wheels, and 2010 Ford Mustang with 17" wheels. For buyers searching for a Ford Mustang rack and pinion assembly, this part number provides a direct replacement path with OE-style dimensions and sealing updates.
This part cross-references Ford 4R3Z3280A and 4R3Z3504AA for the same application.
What It Can Help Resolve
- Excessive steering play or loose steering feel
- Internal fluid leakage in the steering gear
- Hard steering caused by worn rack seals or internal bypass
- Steering noise related to worn hydraulic rack components
- Return-to-center issues tied to rack wear or fluid flow restriction
Installation Notes and Tips
Fits 2005-2007 Ford Mustang, N/A; install an in-line filter and use OE fluid, then flush the hydraulic power steering system during installation. Fits 2008-2009 Ford Mustang, N/A; with 16" wheels, includes inner tie rods, and an in-line filter is available. Fits 2010 Ford Mustang, N/A; with 17" wheels, includes inner tie rods, and an in-line filter is available. For warranty validation, follow the listed fluid and flushing requirements and verify front-end alignment after installation. If steering does not return to center, inspect the alignment and check for a restricted or kinked return line.
Quality Assurance
Each CARDONE 22-288 rack and pinion assembly is factory test driven to verify operation under demanding conditions and confirm on-car communications. The remanufacturing process replaces worn rubber sealing components, adds specialized lubricant, and uses a protective coating to help extend service life while reducing raw material and energy use versus manufacturing a new part.
| Year | Make | Model | Submodel | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2010 | Ford | Mustang | GT | — | — | N/A | with 17" Wheels; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2010 | Ford | Mustang | Base | — | — | N/A | with 17" Wheels; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2010 | Ford | Mustang | Shelby | — | — | N/A | with 17" Wheels; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2009 | Ford | Mustang | — | — | — | N/A | with 16" Wheels; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2008 | Ford | Mustang | — | 4.0L | V6 | N/A | with 16" Wheels; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2007 | Ford | Mustang | — | 4.0L | V6 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2006 | Ford | Mustang | — | 4.0L | V6 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2005 | Ford | Mustang | — | 4.0L | V6 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| No rows match your filter. | |||||||