/live/media/A1/A1_22289_Fro.jpg)
Cardone 22-289 Rack and Pinion Assembly
| Brand | Cardone 22-289 |
|---|---|
| Casting Material | Steel; Aluminum |
| Distance Between Mounting Holes (in) | 17.50 |
| Distance Between Mounting Holes (mm) | 444.50 |
| E-Waste | No |
| Hose Port Type | O-Ring |
| Input Shaft Diameter (in) | 0.81 |
| Input Shaft Diameter (mm) | 20.62 |
| Input Shaft Length (in) | 1.56 |
| Input Shaft Length (mm) | 39.67 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and Pinion, Sealing Kit, Instruction Sheet |
| Pressure Port ID Size | 0.436 |
| Product Condition | Remanufactured |
| Rack Length (in) | 56.75 |
| Rack Length (mm) | 1441.45 |
| Return Port ID Size | 0.386 |
| Steering Rack Color | Black |
| Thread Length (in) | 3.23 |
| Thread Length (mm) | 82.04 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 3.81 |
| Product line | Rack and Pinion Assembly |
| Fits | Ford · 4 vehicles |
Remanufactured OE replacement. Factory-tested for reliable steering performance and on-car communication.
New sealing components. All rubber seals are replaced to help eliminate internal leaks.
Protective coating. Helps resist corrosion and rust for longer service life.
Cross-references Ford 2L1Z3280GA, Ford 3L1Z3504AARM and Ford 6L1Z3504AA for the same application. See all 3.
Remanufactured Steering Rack for Expedition
Cardone 22-289 is a remanufactured electronic power steering rack and pinion assembly built for direct replacement in select Ford Expedition applications. It is engineered with new premium components, replaced rubber sealing parts, and a specialized lubricant to support long service life and consistent steering response.
Fits 2004-2006 Ford Expedition, N/A. Fits 2003 Ford Expedition, N/A.
Key Features
- Remanufactured Original Equipment-style rack and pinion assembly for proper vehicle fit
- Brand-new spool valve seals and rack donut seals to reduce internal leakage where applicable
- Factory test drive process verifies operation under demanding conditions and checks on-car communications
- Protective coating helps resist corrosion and rust
- Polished micro-finish valve sleeves are used where applicable for added durability
- Includes tie rod ends and a sealing kit
- Black finish with steel and aluminum casting materials
Product Details
This Cardone Rack and Pinion Assembly, part number 22-289, is built for Ford Expedition steering service where precise rack travel and stable hydraulic performance are required. The unit measures 56.75 inches in rack length, uses an O-ring hose port type, and has a total lock-to-lock turn count of 3.81. It is remanufactured to restore steering feel while replacing worn sealing components that can contribute to leaks, noise, or inconsistent assist. This part cross-references Ford 2L1Z3280GA and 3L1Z3504AARM for the same application.
Common Problems This Part Can Address
- Steering effort that is hard during the first few minutes of driving
- Internal fluid leakage in the rack and pinion assembly
- Power steering pump whine caused by air in the system after service
- Steering that does not return to center after a turn
- Wear-related “morning sickness” symptoms from internal bypass in the rack
Installation Notes
- Fits 2004-2006 Ford Expedition, N/A, and 2003 Ford Expedition, N/A from 07/15/2002.
- For 2004-2006 Ford Expedition, install an in-line filter and use OE fluid; flush the hydraulic power steering system during installation.
- For 2003 Ford Expedition, install an in-line filter, use the suggested OE fluid, and flush the system for warranty validation.
- Bleed the steering system completely after installation to remove trapped air.
- If the vehicle does not return to center, inspect front-end alignment and check the return line for restriction or kinks.
Quality Assurance
Cardone remanufactures this electronic power steering rack and pinion assembly to rigorous quality and performance standards. Each unit is factory tested, including a simulated drive cycle, to verify operation and communication before release. The remanufacturing process also reduces energy and raw material use compared with producing a new part.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2006 | Ford | Expedition | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2005 | Ford | Expedition | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2004 | Ford | Expedition | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2003 | Ford | Expedition | N/A | From 07/15/2002; includes inner tie rods; in-line filter available; for warranty purposes install a filter, use suggested OE fluid, flush the system; with hydraulic power.; Rack and Pinion Assembly |
| No rows match your filter. | ||||