/live/media/A1/A1_22292_Fro.jpg)
Cardone 22-292 Rack and Pinion Assembly
| Brand | Cardone 22-292 |
|---|---|
| Casting Material | Aluminum |
| Distance Between Mounting Holes (in) | 15.25 |
| Distance Between Mounting Holes (mm) | 387.35 |
| E-Waste | No |
| Hose Port Type | O-Ring |
| Input Shaft Diameter (in) | 0.73 |
| Input Shaft Diameter (mm) | 18.42 |
| Input Shaft Length (in) | 1.50 |
| Input Shaft Length (mm) | 38.10 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and Pinion, Rubber Bushings, Sealing Kit, Instruction Sheet |
| Pressure Port ID Size | 0.436 |
| Product Condition | Remanufactured |
| Rack Length (in) | 50.25 |
| Rack Length (mm) | 1276.35 |
| Return Port ID Size | 0.386 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.88 |
| Thread Length (mm) | 73.03 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 3.69 |
| Product line | Rack and Pinion Assembly |
| Fits | Ford and Mercury · 14 vehicles |
Remanufactured OE replacement. Built to original equipment standards for a precise fit and dependable performance.
Aluminum construction. Lightweight housing with a protective coating to help resist corrosion and rust.
Factory tested. Each unit is driven under extreme conditions to verify communication and operation.
Cross-references Ford 6L2Z3504AA, Ford 7A2Z3504A and Ford 7A2Z3504B for the same application. See all 17.
Remanufactured Electronic Power Steering Rack
CARDONE 22-292 is a remanufactured rack and pinion assembly built for direct replacement in select Ford and Mercury applications. It is engineered for the 2006-2010 Ford Explorer, 2007-2010 Ford Explorer Sport Trac, and 2006-2010 Mercury Mountaineer, with OE-style fit and electronic power steering communication support.
Key Features
- Remanufactured Original Equipment-style rack and pinion assembly for precise vehicle fit
- Brand-new rubber sealing components, including spool valve seals and rack donut seals where applicable
- Specialized lubricant applied to support longer service life
- Factory test drive performed under extreme operating conditions to verify on-car communications
- Protective coating helps resist corrosion and rust
- Aluminum housing with black finish
- Tie rod ends included
- Package contents: rack and pinion, rubber bushings, sealing kit, and instruction sheet
Product Details
This CARDONE Rack and Pinion Assembly, part number 22-292, is remanufactured to rigorous quality and performance standards. The unit uses new premium components and replaced sealing parts to address internal leakage concerns, while polished micro-finish sleeves in the valve housings add durability where applicable. CARDONE’s remanufacturing process also reduces raw material and energy use compared with producing a new part, making it an earth-conscious replacement choice.
Fits 2006-2010 Ford Explorer, N/A; Fits 2007-2010 Ford Explorer Sport Trac, N/A; Fits 2006-2010 Mercury Mountaineer, N/A. This part cross-references Ford 6L2Z3504AA and 7A2Z3504A for the same application. Part number 22-292 is a direct-fit steering replacement for these vehicles.
Common Steering Issues It Can Address
- Steering that feels hard during the first few minutes of driving
- Internal fluid bypass caused by worn sealing rings
- Power steering pump whine after rack replacement when air remains in the system
- Steering that does not return to center after a turn when alignment or return flow is restricted
- Corrosion or wear in the original rack and pinion assembly
Installation Notes
For warranty validation on listed applications, install an in-line filter, use OE fluid, and flush the hydraulic power steering system when replacing the rack and pinion assembly with inner tie rods. Bleed the system completely to remove air and reduce pump noise. If the steering does not return to center, check front-end alignment and inspect the return line for kinks or restriction.
Quality Assurance
Each CARDONE 22-292 rack and pinion assembly undergoes a factory test drive that simulates severe operating conditions and verifies on-car communications. The remanufacturing process replaces all rubber sealing components and uses specialized lubricant to support durability and reliable steering performance.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2010 | Ford | Explorer | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2010 | Ford | Explorer Sport Trac | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2010 | Mercury | Mountaineer | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2009 | Ford | Explorer | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2009 | Ford | Explorer Sport Trac | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2009 | Mercury | Mountaineer | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2008 | Ford | Explorer | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2008 | Ford | Explorer Sport Trac | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2008 | Mercury | Mountaineer | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2007 | Ford | Explorer | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2007 | Ford | Explorer Sport Trac | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2007 | Mercury | Mountaineer | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2006 | Ford | Explorer | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2006 | Mercury | Mountaineer | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| No rows match your filter. | ||||