/live/media/A1/A1_223026_Fro.jpg)
Cardone 22-3026 Rack and Pinion Assembly
| Brand | Cardone 22-3026 |
|---|---|
| Casting Material | Aluminum |
| Distance Between Mounting Holes (in) | 3.63 |
| Distance Between Mounting Holes (mm) | 92.08 |
| E-Waste | No |
| Hose Port Type | O-Ring |
| Input Shaft Diameter (in) | 0.75 |
| Input Shaft Diameter (mm) | 19.10 |
| Input Shaft Length (in) | 1.50 |
| Input Shaft Length (mm) | 38.10 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and Pinion, Mounting Bushing Assembly, Sealing Kit, Instruction Sheet |
| Pressure Port Thread Size | M18 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 47.13 |
| Rack Length (mm) | 1196.98 |
| Return Port Thread Size | M16 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 3.27 |
| Thread Length (mm) | 83.08 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 2.75 |
| Product line | Rack and Pinion Assembly |
| Fits | Chrysler · 6 vehicles |
Remanufactured OE part. Delivers a precise fit with factory-tested performance.
New sealing components. Helps eliminate internal leaks for reliable operation.
Protective coating. Resists corrosion and rust for longer service life.
Cross-references Chrysler 5085317AA, Chrysler 5085317AC and Chrysler 5085520AA for the same application. See all 4.
Cardone 22-3026 Rack and Pinion Assembly
Cardone 22-3026 is a remanufactured electronic power steering rack and pinion assembly built for precise steering response and OE-style fit. It is engineered for Chrysler PT Cruiser applications with hydraulic power steering, including models with standard steering and inner tie rods.
This rack and pinion assembly is part of Cardone’s remanufactured rack and pinion line, which focuses on restoring steering performance with new wear components, tested operation, and corrosion-resistant finishing.
Key Features
- Remanufactured Original Equipment-style rack and pinion assembly for direct vehicle fit
- Brand-new rubber sealing components, spool valve seals, and rack donut seals installed where applicable
- Specialized lubricant applied for extended service life
- Factory test drive performed to verify operation and on-car communications
- Protective coating helps resist corrosion and rust
- Aluminum housing with black finish
- Includes tie rod ends, mounting bushing assembly, sealing kit, and instruction sheet
- O-ring hose port type with M18 x 1.5 pressure port and M16 x 1.5 return port
- 2.75 total turns lock to lock for responsive steering feel
Detailed Description
Cardone Part Number 22-3026 is a remanufactured rack and pinion assembly for Chrysler PT Cruiser steering systems. It measures 47.13 inches in rack length, uses a 0.75-inch input shaft diameter, and is built with aluminum casting for strength and weight control. The unit is remanufactured to restore steering precision while replacing critical sealing components that commonly wear over time.
Fits 2009 Chrysler PT Cruiser, N/A; Fits 2008 Chrysler PT Cruiser, N/A; Fits 2004-2007 Chrysler PT Cruiser, N/A. This part cross-references Chrysler 5085317AA and 5085317AC for the same application.
Common Steering Issues It May Address
- Steering effort that becomes heavy during the first minutes of driving
- Internal fluid leakage in the rack and pinion assembly
- Power steering pump noise caused by air in the hydraulic system after service
- Steering that does not return to center after a turn
- Wear-related bypass in the spool valve or housing
Installation Notes and Tips
For 2004-2009 Chrysler PT Cruiser applications, install an in-line filter, use the suggested OE fluid, and flush the hydraulic power steering system during installation. Proper bleeding is important to remove air from the system and reduce pump whine after service. Verify the vehicle’s sales codes and steering configuration before installation.
Quality Assurance
Each Cardone 22-3026 rack and pinion assembly is remanufactured to rigorous quality and performance standards and factory test driven under simulated extreme operating conditions. The process replaces all rubber sealing components and uses a specialized lubricant to support durability and reliable steering performance.
| Year | Make | Model | Transmission | Position | Notes |
|---|---|---|---|---|---|
| 2009 | Chrysler | PT Cruiser | Automatic | N/A | with Standard Steering (SBA), with 16" Wheels, Includes Inner Tie Rods, In-Line Filter available, For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system, Sales Codes are found on the "Body Code" plate located on the left front side shield, wheel housing, or the upper radiator support of your vehicle; with Hydraulic Power; Rack and Pinion Assembly |
| 2008 | Chrysler | PT Cruiser | Manual | N/A | Rack and Pinion Assembly fitment note: with Standard Steering (SBA); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes install a filter, use OE Fluid, flush system; Sales Codes on "Body Code" plate on left front side shield, wheel housing, or upper radiator support; with Hydraulic Power.; Rack and Pinion Assembly |
| 2007 | Chrysler | PT Cruiser | Manual | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2006 | Chrysler | PT Cruiser | Manual | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2005 | Chrysler | PT Cruiser | Manual | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2004 | Chrysler | PT Cruiser | Manual | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| No rows match your filter. | |||||