/live/media/A1/A1_22324_Fro.jpg)
Cardone 22-324 Rack and Pinion Assembly
| Brand | Cardone 22-324 |
|---|---|
| Casting Material | Steel; Aluminum |
| Distance Between Mounting Holes (in) | 1.97 |
| Distance Between Mounting Holes (mm) | 50.01 |
| E-Waste | No |
| Hose Port Type | O-Ring |
| Input Shaft Diameter (in) | 0.73 |
| Input Shaft Diameter (mm) | 18.42 |
| Input Shaft Length (in) | 2.13 |
| Input Shaft Length (mm) | 53.98 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and Pinion, Rubber Bushings, Sealing Kit, Instruction Sheet |
| Pressure Port Thread Size | M18 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 34.50 |
| Rack Length (mm) | 876.30 |
| Return Port Thread Size | M16 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 0 |
| Thread Length (mm) | 0.00 |
| Tie Rod Ends Included | No |
| Total Turns Lock to Lock | 3.13 |
| Product line | Rack and Pinion Assembly |
| Fits | Chrysler, Dodge, and Eagle · 13 vehicles |
Remanufactured OE part. Built to deliver a precise fit and dependable steering performance.
Factory-tested. Each unit is driven under extreme conditions to verify on-car communications.
Protective coating. Helps resist corrosion and rust for longer service life.
Cross-references Chrysler 4600003, Chrysler 4616985 and Chrysler 4695820 for the same application. See all 12.
Remanufactured Steering Rack for Chrysler and Dodge
Cardone 22-324 is a remanufactured electronic power steering rack and pinion assembly built for precise OE-style fit and dependable steering response. It is engineered for 1993-1995 Chrysler Concorde, Intrepid, LHS, and New Yorker applications, plus 1993-1995 Dodge Intrepid coverage.
Key Features
- Remanufactured Original Equipment-style rack and pinion assembly for direct vehicle fit
- Brand-new rubber sealing components installed to help control internal leakage
- Specialized lubricant applied for extended service life
- Factory test drive performed under simulated operating conditions
- Protective coating helps resist corrosion and rust
- Steel and aluminum casting materials for application-specific strength and durability
- Package contents include rack and pinion, rubber bushings, sealing kit, and instruction sheet
Product Details
This Cardone Rack and Pinion Assembly, part number 22-324, is remanufactured to meet rigorous quality and performance standards. The unit is finished with new spool valve seals and rack donut seals where applicable, and the valve housings receive a polished micro-finish sleeve for added durability where used in the design. It uses O-ring hose ports, M18 x 1.5 pressure port threads, and M16 x 1.5 return port threads. With a rack length of 34.50 inches and a 3.13 lock-to-lock turn ratio, this assembly is built for Chrysler Concorde, Chrysler Intrepid, Chrysler LHS, Chrysler New Yorker, and Dodge Intrepid steering systems that require hydraulic power steering.
This part cross-references Chrysler and Dodge OE numbers 4600003 and 4616985 for the same application.
Common Steering Problems This Part Addresses
- Hard steering during the first few minutes of driving
- Power steering pump whine caused by air in the system after rack replacement
- Steering that does not return to center after a turn
- Internal bypass from worn spool valve sealing surfaces
- Fluid leakage from aged rack seals and sealing components
Installation Notes
Fits 1993 Chrysler Concorde, 1993 Chrysler Intrepid, 1993 Dodge Intrepid, 1994 Chrysler Concorde, 1994 Chrysler Intrepid, 1994 Chrysler LHS, 1994 Chrysler New Yorker, 1994 Dodge Intrepid, 1995 Chrysler Concorde, 1995 Chrysler Intrepid, 1995 Chrysler LHS, 1995 Chrysler New Yorker, and 1995 Dodge Intrepid. These applications are for vehicles with standard steering and hydraulic power; 1995 Chrysler and Dodge listings exclude Automatic Stick Shift (Autostick). Supplied without inner tie rods. For warranty purposes, install an in-line filter, use the suggested OE fluid, and flush the system before operation. Bleed the steering system completely after installation to remove trapped air and verify proper return-to-center behavior with a correct front-end alignment.
Quality Assurance
Each unit undergoes CARDONE’s Factory Test Drive to verify operation under extreme conditions and confirm on-car communications. The remanufacturing process replaces rubber sealing components, applies specialized lubricant, and uses a protective coating to support long-term reliability while reducing raw material and energy use versus manufacturing a new part.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1995 | Chrysler | Concorde | N/A | without Automatic Stick Shift (Autostick); with Standard Steering (SBA); Supplied without Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Sales Codes are found on the "Body Code" plate located on the left front side shield, wheel housing, or the upper radiator support of your vehicle; with Hydraulic Power; Rack and Pinion Assembly |
| 1995 | Chrysler | Intrepid | N/A | without Automatic Stick Shift (Autostick); with Standard Steering (SBA); Supplied without Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Sales Codes are found on the "Body Code" plate located on the left front side shield, wheel housing, or the upper radiator support of your vehicle; with Hydraulic Power; Rack and Pinion Assembly |
| 1995 | Chrysler | LHS | N/A | without Automatic Stick Shift (Autostick); with Standard Steering (SBA); Supplied without Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Sales Codes are found on the "Body Code" plate located on the left front side shield, wheel housing, or the upper radiator support of your vehicle; with Hydraulic Power; Rack and Pinion Assembly |
| 1995 | Chrysler | New Yorker | N/A | without Automatic Stick Shift (Autostick); with Standard Steering (SBA); Supplied without Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Sales Codes are found on the "Body Code" plate located on the left front side shield, wheel housing, or the upper radiator support of your vehicle; with Hydraulic Power; Rack and Pinion Assembly |
| 1995 | Dodge | Intrepid | N/A | without Automatic Stick Shift (Autostick); with Standard Steering (SBA); Supplied without Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Sales Codes are found on the "Body Code" plate located on the left front side shield, wheel housing, or the upper radiator support of your vehicle; with Hydraulic Power; Rack and Pinion Assembly |
| 1994 | Chrysler | Concorde | N/A | with Standard Steering (SBA); Supplied without Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Sales Codes are found on the "Body Code" plate located on the left front side shield, wheel housing, or the upper radiator support of your vehicle; with Hydraulic Power; Rack and Pinion Assembly |
| 1994 | Chrysler | Intrepid | N/A | with Standard Steering (SBA); Supplied without Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Sales Codes are found on the "Body Code" plate located on the left front side shield, wheel housing, or the upper radiator support of your vehicle; with Hydraulic Power; Rack and Pinion Assembly |
| 1994 | Chrysler | LHS | N/A | with Standard Steering (SBA); Supplied without Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Sales Codes are found on the "Body Code" plate located on the left front side shield, wheel housing, or the upper radiator support of your vehicle; with Hydraulic Power; Rack and Pinion Assembly |
| 1994 | Chrysler | New Yorker | N/A | with Standard Steering (SBA); Supplied without Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Sales Codes are found on the "Body Code" plate located on the left front side shield, wheel housing, or the upper radiator support of your vehicle; with Hydraulic Power; Rack and Pinion Assembly |
| 1994 | Dodge | Intrepid | N/A | with Standard Steering (SBA); Supplied without Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Sales Codes are found on the "Body Code" plate located on the left front side shield, wheel housing, or the upper radiator support of your vehicle; with Hydraulic Power; Rack and Pinion Assembly |
| 1993 | Chrysler | Concorde | N/A | Supplied without Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 1993 | Chrysler | Intrepid | N/A | Supplied without Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 1993 | Dodge | Intrepid | N/A | Supplied without Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| No rows match your filter. | ||||