/live/media/A1/A1_22328_Fro.jpg)
Cardone 22-328 Rack and Pinion Assembly
| Brand | Cardone 22-328 |
|---|---|
| Casting Material | Steel; Aluminum |
| Distance Between Mounting Holes (in) | 3.00 |
| Distance Between Mounting Holes (mm) | 76.20 |
| E-Waste | No |
| Hose Port Type | O-Ring |
| Input Shaft Diameter (in) | 0.73 |
| Input Shaft Diameter (mm) | 18.42 |
| Input Shaft Length (in) | 1.75 |
| Input Shaft Length (mm) | 44.45 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and Pinion, Rubber Bushing, Sealing Kit, Instruction Sheet |
| Pressure Port Thread Size | M18 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 47.25 |
| Rack Length (mm) | 1200.15 |
| Return Port Thread Size | M16 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 3.00 |
| Thread Length (mm) | 76.20 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 3.19 |
| Product line | Rack and Pinion Assembly |
| Fits | Dodge and Plymouth · 6 vehicles |
Remanufactured OE part. Delivers a perfect fit with factory-tested performance.
New sealing components. Replaced rubber seals help eliminate internal leaks.
Protective coating. Helps resist corrosion and rust for longer service life.
Cross-references Dodge 4626890, Dodge 4656350 and Plymouth 4626890 for the same application. See all 4.
Remanufactured Steering Rack for Neon
Restore precise steering response with this remanufactured CARDONE rack and pinion assembly. Built for hydraulic power steering applications, it is engineered for 1995-1997 Dodge Neon and Plymouth Neon models with Standard Steering (SBA), including vehicles with inner tie rods.
Part number 22-328 is remanufactured with new premium components and tested to verify on-car communication and performance under demanding conditions. For Dodge Neon and Plymouth Neon owners looking for a direct-fit steering rack replacement, this unit is built around OE-style fitment and durability.
Key Features
- Remanufactured Original Equipment-style rack and pinion assembly
- Fits 1995-1996 Dodge Neon, N/A and 1995-1996 Plymouth Neon, N/A
- Fits 1997 Dodge Neon, N/A and 1997 Plymouth Neon, N/A with Standard Steering (SBA) before 10/14/1996
- Includes inner tie rods where applicable
- New spool valve seals and rack donut seals installed to reduce internal leakage
- 100% replacement of rubber sealing components
- Specialized lubricant applied for extended service life
- Protective coating helps resist corrosion and rust
- Black steering rack with steel and aluminum casting materials
- O-ring hose ports with M18 x 1.5 pressure port and M16 x 1.5 return port
- 3.19 total turns lock to lock
Product Details
CARDONE’s Electronic Power Steering Rack and Pinion line focuses on remanufactured steering components that are rebuilt to rigorous quality and performance standards. For this application, the rack is factory tested to simulate extreme operating conditions while checking on-car communications, then finished with new sealing components and a specialized lubricant to support long-term reliability. The result is a steering rack assembly intended for direct replacement on compatible Dodge Neon and Plymouth Neon hydraulic power steering systems.
This part cross-references Dodge and Plymouth OE numbers 4626890 and 4656350 for the same application. Part number 22-328 is a practical choice when replacing a worn steering rack on a 1995-1997 Dodge Neon or Plymouth Neon.
Common Problems This Part Can Address
- Excessive steering play or loose steering feel
- Fluid leakage from the rack and pinion assembly
- Hard steering after startup, often described as morning sickness
- Steering that does not return to center due to internal wear or restricted flow
- Power steering pump noise caused by air in the system after rack service
Installation Notes
Before installation, confirm the vehicle uses Standard Steering (SBA) and hydraulic power steering, and verify the body code sales information when needed. CARDONE recommends installing an in-line filter, using the suggested OE fluid, and flushing the system to help protect the replacement rack and pinion assembly. After installation, bleed the steering system completely to remove trapped air and check alignment if the steering does not return to center.
Quality Assurance
Each unit is remanufactured to CARDONE’s quality standards, then factory test driven to confirm operation under demanding conditions. Rubber sealing components are replaced, corrosion-resistant finishing is applied, and the assembly is built to deliver OE-style fitment for the listed Dodge Neon and Plymouth Neon applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1997 | Dodge | Neon | N/A | Fitment Note: with Standard Steering (SBA) Before 10/14/1996; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes, always install a filter, use suggested OE Fluid, and flush the system; Sales Codes are located on the "Body Code" plate on the vehicle; with Hydraulic Power.; Rack and Pinion Assembly |
| 1997 | Plymouth | Neon | N/A | Fitment Note: with Standard Steering (SBA) Before 10/14/1996; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes, always install a filter, use suggested OE Fluid, and flush the system; Sales Codes are located on the "Body Code" plate on the vehicle; with Hydraulic Power.; Rack and Pinion Assembly |
| 1996 | Dodge | Neon | N/A | Rack and Pinion Assembly fitment note: with Standard Steering (SBA); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes install a filter, use OE Fluid, flush system; Sales Codes on "Body Code" plate on left front side shield, wheel housing, or upper radiator support; with Hydraulic Power.; Rack and Pinion Assembly |
| 1996 | Plymouth | Neon | N/A | Rack and Pinion Assembly fitment note: with Standard Steering (SBA); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes install a filter, use OE Fluid, flush system; Sales Codes on "Body Code" plate on left front side shield, wheel housing, or upper radiator support; with Hydraulic Power.; Rack and Pinion Assembly |
| 1995 | Dodge | Neon | N/A | Rack and Pinion Assembly fitment note: with Standard Steering (SBA); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes install a filter, use OE Fluid, flush system; Sales Codes on "Body Code" plate on left front side shield, wheel housing, or upper radiator support; with Hydraulic Power.; Rack and Pinion Assembly |
| 1995 | Plymouth | Neon | N/A | Rack and Pinion Assembly fitment note: with Standard Steering (SBA); Includes Inner Tie Rods; In-Line Filter available; For warranty purposes install a filter, use OE Fluid, flush system; Sales Codes on "Body Code" plate on left front side shield, wheel housing, or upper radiator support; with Hydraulic Power.; Rack and Pinion Assembly |
| No rows match your filter. | ||||