Cardone 22-338 Rack and Pinion Assembly
OE Quality 60-Day Returns
Cardone
 Rack and Pinion Assembly

Cardone 22-338 Rack and Pinion Assembly

Brand Cardone 22-338
Casting Material Steel; Aluminum
Distance Between Mounting Holes (in) 10.88
Distance Between Mounting Holes (mm) 276.23
E-Waste No
Hose Port Type O-Ring
Input Shaft Diameter (in) 0.60
Input Shaft Diameter (mm) 15.24
Input Shaft Length (in) 1.75
Input Shaft Length (mm) 44.45
Number of Mounting Holes 2
Package Contents Rack and Pinion, Mounting Bushings Assembly, Sealing Kit, Instruction Sheet
Pressure Port Thread Size M18 x 1.5
Product Condition Remanufactured
Rack Length (in) 49.50
Rack Length (mm) 1257.30
Return Port Thread Size M16 x 1.5
Steering Rack Color Black
Thread Length (in) 2.88
Thread Length (mm) 73.03
Tie Rod Ends Included Yes
Total Turns Lock to Lock 2.88
Product line Rack and Pinion Assembly
Fits Dodge · 13 vehicles

Remanufactured OE part. Built to rigorous quality and performance standards for a precise replacement.

Factory-tested. Each unit is driven under extreme conditions to verify communications and performance.

Corrosion-resistant coating. Finished to help protect against rust and extend service life.

Cross-references Dodge 52039207AC, Dodge 52106477AC and Dodge 52106477AF for the same application. See all 3.

$286.15Free shipping
Out of stock
Step 1 — Confirm fitment
Free return shipping if it doesn't fit when you check fitment here first.
Select your vehicle to confirm fitment
Verify this part fits before purchasing — free returns if it doesn't
Step 2 — Quantity
Order total $286.15
Free shipping to the continental U.S.
Free returns within 60 days if it doesn't fit when fitment is verified.
Not what you need? See all Rack and Pinion Assembly options

Remanufactured Electronic Power Steering Rack

Cardone 22-338 is a remanufactured rack and pinion assembly built for direct replacement in select Dodge Dakota and Dodge Durango applications. It is rebuilt with new sealing components, specialized lubricant, and protective coating to support dependable steering response and long service life.

This CARDONE Rack and Pinion Assembly line focuses on OE-style fitment and verified on-car communication through factory testing. For drivers searching for a remanufactured Dodge Dakota rack and pinion or a Dodge Durango steering rack replacement, part number 22-338 provides a service-ready solution.

Key Features

  • Remanufactured Original Equipment-style rack and pinion assembly
  • New spool valve seals and rack donut seals installed where applicable
  • 100% replacement of rubber sealing components
  • Factory test drive performed under extreme operating conditions
  • Protective coating helps resist corrosion and rust
  • Specialized lubricant applied for extended service life
  • Steel and aluminum casting materials
  • Rack length: 49.50 in. with 2.88 total turns lock to lock
  • O-ring hose ports with M18 x 1.5 pressure port and M16 x 1.5 return port
  • Tie rod ends included

Product Details

Cardone 22-338 is engineered for steering systems that require a remanufactured rack and pinion assembly with verified fit and function. The unit is built with a 10.88 in. mounting-hole spacing, a 0.60 in. input shaft diameter, and a black finish. It is supplied with a rack and pinion, mounting bushings assembly, sealing kit, and instruction sheet. This part cross-references Dodge OE numbers 52039207AC and 52106477AC for the same application.

Compatible With 1997-2004 Dodge Dakota and 1999-2003 Dodge Durango, this rack and pinion assembly is a direct-fit steering replacement for vehicles needing restored steering control, reduced internal leakage, and consistent hydraulic operation. Search terms such as 1997-2004 Dodge Dakota rack and pinion assembly and 1999-2003 Dodge Durango steering rack replacement align with this application.

Common Issues This Part Addresses

  • Hard steering during the first few minutes of driving
  • Internal hydraulic leakage in the rack and pinion
  • Steering wheel not returning to center after a turn
  • Power steering pump whine caused by air in the system after service
  • Morning sickness symptoms from worn spool valve sealing surfaces

Installation Notes

  • Fits 1997-2004 Dodge Dakota, N/A
  • Fits 1999-2003 Dodge Durango, N/A
  • Install an in-line filter and use OE fluid on listed Dodge applications
  • Flush the hydraulic power steering system during installation
  • Bleed the steering system completely to remove trapped air
  • Check front-end alignment if the steering does not return to center
  • Inspect the return line for restriction or kinks before condemning the rack

Quality Assurance

Each CARDONE Electronic Power Steering Rack and Pinion is remanufactured to rigorous quality and performance standards and tested to confirm on-car communication. The remanufacturing process also reduces the energy and raw material required to produce a new part by 80%, supporting a lower-impact repair choice.

Related reading

This part fits 13 vehicles
Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
YearMakeModelDrive TypePositionNotes
2004DodgeDakotaRWDN/AInstall in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly
2003DodgeDakotaRWDN/AInstall in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly
2003DodgeDurangoRWDN/AInstall in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly
2002DodgeDakotaRWDN/AInstall in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly
2002DodgeDurangoRWDN/AInstall in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly
2001DodgeDakotaRWDN/AInstall in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly
2001DodgeDurangoRWDN/AInstall in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly
2000DodgeDakotaRWDN/AInstall in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly
2000DodgeDurangoRWDN/AInstall in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly
1999DodgeDakotaRWDN/AInstall in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly
1999DodgeDurangoRWDN/AInstall in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly
1998DodgeDakotaRWDN/AInstall in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly
1997DodgeDakotaRWDN/AInstall in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly
Directly replaces or cross-references 3 part numbers
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.
Dodge — 52039207ACDodge — 52106477ACDodge — 52106477AF