/live/media/A1/A1_22389_Fro.jpg)
Cardone 22-389 Rack and Pinion Assembly
| Brand | Cardone 22-389 |
|---|---|
| Casting Material | Steel; Aluminum |
| Distance Between Mounting Holes (in) | 11.50 |
| Distance Between Mounting Holes (mm) | 292.10 |
| E-Waste | No |
| Hose Port Type | O-Ring |
| Input Shaft Diameter (in) | 0.73 |
| Input Shaft Diameter (mm) | 18.64 |
| Input Shaft Length (in) | 2.50 |
| Input Shaft Length (mm) | 63.50 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and Pinion, Mounting Bushings Assembly, Sealing Kit, Instruction Sheet |
| Pressure Port Thread Size | M18 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 49.06 |
| Rack Length (mm) | 1246.20 |
| Return Port Thread Size | M16 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 3.11 |
| Thread Length (mm) | 79.02 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 3.44 |
| Product line | Rack and Pinion Assembly |
| Fits | Jeep · 2 vehicles |
Remanufactured OE fit. Built to original equipment standards for a direct replacement.
Factory-tested performance. Each unit is driven under extreme conditions to verify operation.
New sealing components. Fresh seals and specialized lubricant help extend service life.
Cross-references Jeep 5189419AA and Jeep 52109970AA for the same application. See all 2.
Remanufactured Steering Rack for Jeep Liberty
Restore precise steering response with this remanufactured CARDONE Electronic Power Steering Rack and Pinion Assembly. Built for 2006-2007 Jeep Liberty applications, Part Number 22-389 is remanufactured with new premium components and tested to verify on-car communication and performance under demanding conditions.
Key Features
- Remanufactured Original Equipment-style fit for the Jeep Liberty
- New spool valve seals and rack donut seals installed where applicable
- 100% replacement of rubber sealing components
- Specialized lubricant applied for extended service life
- Protective coating helps resist corrosion and rust
- Factory test drive checks operation under extreme conditions
- Black steering rack housing with steel and aluminum construction
- Includes rack and pinion, mounting bushings assembly, sealing kit, and instruction sheet
Product Details
CARDONE 22-389 is a remanufactured rack and pinion assembly engineered for direct replacement in 2006-2007 Jeep Liberty models. It features an 11.50-inch mounting hole spacing, O-ring hose ports, M18 x 1.5 pressure port threads, M16 x 1.5 return port threads, and a 3.44 total turns lock-to-lock ratio. The unit includes tie rod ends and is built to support accurate steering feel and consistent hydraulic operation. This part cross-references Jeep OE numbers 5189419AA and 52109970AA for the same application.
Common Steering Issues It Can Address
- Excessive steering play or loose steering response
- Internal hydraulic leakage in the rack and pinion assembly
- Hard steering after startup or during initial driving
- Steering that does not return to center properly
- Power steering noise caused by worn internal seals or bypass
Installation Notes
Fits 2006-2007 Jeep Liberty, N/A. For warranty validation on Rack and Pinion Assembly with inner tie rods, install an in-line filter, use OE fluid, and flush the hydraulic power steering system during installation. Bleed the steering system completely to remove air and reduce pump whine. If the vehicle does not return to center, check front-end alignment and inspect the return line for restriction or kinks.
Quality Assurance
Each CARDONE Electronic Power Steering Rack and Pinion Assembly undergoes factory testing that simulates severe operating conditions while verifying on-car communications. The remanufacturing process replaces sealing components, uses specialized lubricant, and applies protective coating to support durability and corrosion resistance. Part Number 22-389 is built to meet rigorous quality and performance standards for 2006-2007 Jeep Liberty steering service.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2007 | Jeep | Liberty | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2006 | Jeep | Liberty | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| No rows match your filter. | ||||