/live/media/A1/A1_261400_Fro.jpg)
Cardone 26-1400 Rack and Pinion Assembly
| Brand | Cardone 26-1400 |
|---|---|
| Casting Material | Steel; aluminum |
| Distance Between Mounting Holes (in) | 0.00 |
| Distance Between Mounting Holes (mm) | 0.00 |
| E-Waste | No |
| Hose Port Type | O-ring |
| Input Shaft Diameter (in) | 0.65 |
| Input Shaft Diameter (mm) | 16.38 |
| Input Shaft Length (in) | 2.83 |
| Input Shaft Length (mm) | 71.88 |
| Number of Mounting Holes | 1 |
| Package Contents | Rack and pinion, sealing kit, instruction sheet |
| Pressure Port Thread Size | M14 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 46.25 |
| Rack Length (mm) | 1174.75 |
| Return Port Thread Size | M16 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 1.83 |
| Thread Length (mm) | 46.58 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 3.44 |
| Product line | Rack and Pinion Assembly |
| Fits | Subaru · 4 vehicles |
Remanufactured OE part. Built to original equipment standards for a precise, direct replacement.
Factory-tested performance. Each unit is driven under extreme conditions to verify communication and function.
New sealing components. All rubber seals are replaced to help prevent internal leaks and extend service life.
Cross-references Subaru 34110AC040 and Subaru 34140AA040 for the same application. See all 2.
Remanufactured Steering Rack for Subaru Legacy
Restore precise steering response with this remanufactured Cardone rack and pinion assembly for select 1996-1999 Subaru Legacy models. Cardone Part Number 26-1400 is built with new sealing components, specialized lubricant, and factory testing to support dependable operation in daily driving.
Key Features
- Remanufactured Original Equipment-style fit for select Subaru Legacy applications
- 100% replacement of rubber sealing components
- New spool valve seals and rack donut seals installed where applicable
- Factory test drive verifies operation and on-car communications
- Protective coating helps resist corrosion and rust
- Steel and aluminum casting construction
- Includes rack and pinion, sealing kit, and instruction sheet
Product Details
Cardone Rack and Pinion Assembly 26-1400 is remanufactured to meet rigorous quality and performance standards for steering service on 1996-1999 Subaru Legacy vehicles. The unit is finished with a protective coating, uses specialized lubricant for extended service life, and is tested under simulated operating conditions to confirm proper function. This part cross-references Subaru 34110AC040 and 34140AA040 for the same application.
For Subaru Legacy steering repair, this assembly addresses worn internal seals and hydraulic leakage concerns while maintaining OE-style vehicle fit. It is a direct replacement choice for technicians servicing Subaru Legacy steering systems that require a remanufactured rack and pinion assembly.
Common Issues This Part May Resolve
- Steering effort that becomes heavy after startup
- Internal hydraulic leaks in the rack and pinion
- Power steering fluid bypass caused by worn spool valve seals
- Steering that does not return smoothly after a turn
- Noise or poor steering response related to a worn steering rack
Installation Notes and Tips
- Fits 1996-1999 Subaru Legacy, N/A.
- Install an in-line filter and use OE fluid during service.
- Flush the hydraulic power steering system when installing the rack and pinion assembly with inner tie rods for warranty validation.
- Bleed the steering system completely after installation to remove trapped air.
- Check front-end alignment and inspect return lines for restriction or kinks if steering does not return to center.
Quality Assurance
Cardone remanufactures this steering rack using new sealing components, specialized lubricant, and factory testing to verify performance before release. The remanufacturing process also reduces energy and raw material use compared with producing a new part.
| Year | Make | Model | Submodel | Position | Notes |
|---|---|---|---|---|---|
| 1999 | Subaru | Legacy | Outback | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 1998 | Subaru | Legacy | Outback | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 1997 | Subaru | Legacy | Outback | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 1996 | Subaru | Legacy | Outback | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| No rows match your filter. | |||||