/live/media/A1/A1_261653_Fro.jpg)
Cardone 26-1653 Rack and Pinion Assembly
| Brand | Cardone 26-1653 |
|---|---|
| Casting Material | Aluminum |
| Distance Between Mounting Holes (in) | 0.00 |
| Distance Between Mounting Holes (mm) | 0.00 |
| E-Waste | No |
| Hose Port Type | Seat |
| Input Shaft Diameter (in) | 0.68 |
| Input Shaft Diameter (mm) | 17.27 |
| Input Shaft Length (in) | 1.69 |
| Input Shaft Length (mm) | 42.86 |
| Number of Mounting Holes | 1 |
| Package Contents | Rack and Pinion, Installation Kit, Instruction Sheet |
| Pressure Port Thread Size | M16 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 40.75 |
| Rack Length (mm) | 1035.05 |
| Return Port Thread Size | M17 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.11 |
| Thread Length (mm) | 53.59 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 3.19 |
| Product line | Rack and Pinion Assembly |
| Fits | Toyota · 4 vehicles |
Remanufactured OE part. Built to original equipment standards for a direct-fit replacement.
Aluminum housing. Lightweight construction finished with a protective coating to resist corrosion.
New sealing components. Fresh seals and specialized lubricant help reduce internal leaks and extend life.
Cross-references Toyota 4425032030 for the same application. See all 1.
Remanufactured Steering Rack for Toyota Camry
Restore precise steering response with this remanufactured CARDONE Electronic Power Steering Rack and Pinion Assembly. Built for 1983-1986 Toyota Camry applications, part number 26-1653 is remanufactured with new sealing components, specialized lubricant, and protective coating for dependable operation.
Key Features
- Fits 1983-1986 Toyota Camry, N/A
- Remanufactured Original Equipment-style fit for the listed application
- New spool valve seals and rack donut seals installed where applicable
- 100% replacement of rubber sealing components
- Factory test drive verifies operation under extreme conditions and on-car communications
- Protective coating helps resist corrosion and rust
- Aluminum casting with black finish
- Tie rod ends included
- Package contents: rack and pinion, installation kit, instruction sheet
Product Details
CARDONE Rack and Pinion Assembly 26-1653 is remanufactured to meet rigorous performance standards for the Toyota Camry. The unit uses premium replacement components, polished micro-finish sleeves where applicable, and a specialized lubricant to support long service life. With a rack length of 40.75 in, a total lock-to-lock turn count of 3.19, M16 x 1.5 pressure port threads, and M17 x 1.5 return port threads, this assembly is built around the specifications needed for the listed Camry fitment. This part cross-references Toyota 4425032030 for the same application.
Common Steering Issues This Part Can Address
- Hard steering during the first few minutes of driving
- Internal fluid bypass from worn seals or spool valve leakage
- Steering that does not return to center after a turn
- Power steering pump whine caused by air in the system after service
- Corrosion-related wear in the steering rack housing
Installation Notes
For 1983-1986 Toyota Camry installation, use an in-line filter and OE fluid, and flush the hydraulic power steering system when installing the rack and pinion assembly with inner tie rods for warranty validation. Bleed the steering system completely after installation to remove trapped air and verify smooth operation.
Quality Assurance
Each CARDONE electronic power steering rack and pinion undergoes factory testing that simulates demanding operating conditions while checking on-car communications. The remanufacturing process also reduces energy and raw material use compared with producing a new part, while replacing worn sealing components to support reliable service.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1986 | Toyota | Camry | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 1985 | Toyota | Camry | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 1984 | Toyota | Camry | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 1983 | Toyota | Camry | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| No rows match your filter. | ||||