/live/media/A1/A1_261683_Fro.jpg)
Cardone 26-1683 Rack and Pinion Assembly
| Brand | Cardone 26-1683 |
|---|---|
| Casting Material | Steel; Aluminum |
| Distance Between Mounting Holes (in) | 0.00 |
| Distance Between Mounting Holes (mm) | 0.00 |
| E-Waste | No |
| Hose Port Type | Banjo/Washer |
| Input Shaft Diameter (in) | 0.75 |
| Input Shaft Diameter (mm) | 19.00 |
| Input Shaft Length (in) | 1.63 |
| Input Shaft Length (mm) | 41.28 |
| Number of Mounting Holes | 1 |
| Package Contents | Rack and Pinion, EVO Sealing Kit, Installation Kit, Instruction Sheet |
| Pressure Port Thread Size | M16 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 46.50 |
| Rack Length (mm) | 1181.10 |
| Return Port Thread Size | M17 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.12 |
| Thread Length (mm) | 53.72 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 2.88 |
| Product line | Rack and Pinion Assembly |
| Fits | Lexus · 2 vehicles |
Remanufactured OE replacement. Built to original equipment standards for a precise fit.
Factory-tested performance. Each unit is driven under extreme conditions to verify communication.
New sealing components. Rubber seals are replaced to help eliminate internal leaks.
Cross-references Lexus 4425032042 and Lexus 4550339025 for the same application. See all 2.
Remanufactured Steering Rack for Lexus ES250
Restore precise steering response with this remanufactured Cardone rack and pinion assembly for the 1990-1991 Lexus ES250. Built for direct OE-style fitment, Cardone 26-1683 is remanufactured with new sealing components and tested under simulated driving conditions to verify operation and on-car communication.
Cardone’s Rack and Pinion Assembly line focuses on remanufactured steering components that match original vehicle fit and function. For Lexus ES250 owners, that means a replacement steering rack engineered around the original mounting, port, and shaft specifications.
Key Features
- Fits 1990-1991 Lexus ES250
- Remanufactured original equipment-style steering rack
- Cardone part number 26-1683
- Steel and aluminum casting materials
- Banjo/washer hose port type
- Pressure port thread size: M16 x 1.5
- Return port thread size: M17 x 1.5
- Input shaft diameter: 0.75 in. (19.00 mm)
- Total turns lock to lock: 2.88
- Tie rod ends included
- Finished with a protective coating to resist corrosion
Detailed Description
This Cardone rack and pinion assembly is remanufactured to restore steering control on the Lexus ES250 while maintaining the original vehicle geometry and connection points. The unit includes new rubber sealing components, new spool valve seals, and rack donut seals where applicable, along with specialized lubricant for extended service life. Each assembly is factory test driven to help confirm performance under demanding conditions and verify communication on the vehicle.
Part number 26-1683 is listed for 1990-1991 Lexus ES250 applications and includes inner tie rods. This part cross-references Lexus OE numbers 4425032042 and 4550339025 for the same application.
Common Issues This Part Can Address
- Steering effort that is hard during the first few minutes of driving
- Power steering fluid leakage from worn internal seals
- Steering that does not return to center after a turn
- Whining caused by air in the power steering system after rack replacement
- Internal bypass from worn spool valve sealing surfaces
Installation Notes and Tips
Fits 1990-1991 Lexus ES250, N/A. The notes for this application state that the unit is supplied without EVO component, includes inner tie rods, and an in-line filter is available. Always install a filter and use OE fluid for warranty purposes, then flush the hydraulic power steering system completely before returning the vehicle to service.
After installation, bleed the steering system thoroughly to remove trapped air. If the steering does not return to center, inspect front-end alignment and check the return line for kinks or restrictions.
Quality Assurance
Cardone remanufactures this steering rack to rigorous quality and performance standards using brand-new premium components where required. The assembly is finished with a protective coating, tested on a factory drive cycle, and built to support reliable operation in the 1990-1991 Lexus ES250 platform.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1991 | Lexus | ES250 | N/A | Supplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; Recommended to always install a filter and use OE Fluid for warranty purposes; Flush the system with Hydraulic Power.; Rack and Pinion Assembly |
| 1990 | Lexus | ES250 | N/A | Supplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; Recommended to always install a filter and use OE Fluid for warranty purposes; Flush the system with Hydraulic Power.; Rack and Pinion Assembly |
| No rows match your filter. | ||||