/live/media/A1/A1_261875_Fro.jpg)
Cardone 26-1875 Rack and Pinion Assembly
| Brand | Cardone 26-1875 |
|---|---|
| Casting Material | Steel; Aluminum |
| Distance Between Mounting Holes (in) | 0.00 |
| Distance Between Mounting Holes (mm) | 0.00 |
| E-Waste | No |
| Hose Port Type | Banjo/Washer |
| Input Shaft Diameter (in) | 0.69 |
| Input Shaft Diameter (mm) | 17.42 |
| Input Shaft Length (in) | 2.31 |
| Input Shaft Length (mm) | 58.75 |
| Number of Mounting Holes | 1 |
| Package Contents | Rack and Pinion, EVO Sealing Kit, Instruction Sheet |
| Pressure Port Thread Size | M14 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 47.38 |
| Rack Length (mm) | 1203.33 |
| Return Port Thread Size | M16 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.45 |
| Thread Length (mm) | 62.28 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 2.56 |
| Product line | Rack and Pinion Assembly |
| Fits | INFINITI · 7 vehicles |
Remanufactured OE part. Delivers a precise fit with factory-tested performance.
New sealing components. Replaced rubber seals help eliminate internal leaks.
Protective coating. Helps resist corrosion and rust for longer service life.
Cross-references Infiniti 4852161U00, Infiniti 4900160U10 and Infiniti 4900167U00 for the same application. See all 5.
Cardone Electronic Power Steering Rack
Cardone 26-1875 is a remanufactured rack and pinion assembly for the 1990-1996 Infiniti Q45 with hydraulic power steering. It is built with new sealing components, a specialized lubricant, and factory-tested operation to support accurate steering response and OE-style fitment.
Key Features
- Remanufactured Original Equipment-style rack and pinion assembly for a direct vehicle fit
- Fits 1990-1996 Infiniti Q45, with front steering rack and hydraulic power steering
- New spool valve seals and rack donut seals installed to reduce internal leakage
- 100% replacement of rubber sealing components
- Factory test drive performed to verify operation under demanding conditions and on-car communications
- Protective coating helps resist corrosion and rust
- Includes rack and pinion, EVO sealing kit, and instruction sheet
- Part number 26-1875 is built with steel and aluminum casting materials
Product Details
This Cardone rack and pinion assembly is remanufactured to restore steering performance on Infiniti Q45 models from 1990 through 1996. The unit is finished with a protective coating, uses specialized lubricant for extended service life, and is assembled with premium replacement components to address wear points commonly found in steering racks. Cardone 26-1875 is also listed with tie rod ends included and a black steering rack finish. This part cross-references Infiniti OE numbers 4852161U00 and 4900160U10 for the same application.
Common Problems This Part Can Address
- Excessive steering play or loose steering feel
- Internal rack leakage causing fluid loss or poor assist
- Hard steering during cold start or initial driving
- Steering that does not return smoothly after a turn
- Noise or whine related to worn steering rack seals or air in the system
Installation Notes
Fits 1990-1996 Infiniti Q45, front steering rack application with hydraulic power steering. For warranty purposes, Cardone recommends installing an in-line filter, using the suggested OE fluid, and flushing the system during service. The steering system must be bled completely after installation to remove air and reduce pump whine. If the vehicle does not return to center, inspect front-end alignment and check the return line for restriction or kinks.
Quality Assurance
Each unit undergoes Cardone’s factory test drive to confirm operation under simulated extreme conditions and verify on-car communications. The remanufacturing process also replaces rubber sealing components and applies specialized lubricant to support durability and reliable steering performance. Part number 26-1875 is remanufactured to rigorous quality and performance standards for Infiniti Q45 applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1996 | INFINITI | Q45 | N/A | with Front Steering Rack; Supplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 1995 | INFINITI | Q45 | N/A | with Front Steering Rack; Supplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 1994 | INFINITI | Q45 | N/A | with Front Steering Rack; Supplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 1993 | INFINITI | Q45 | N/A | with Front Steering Rack; Supplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 1992 | INFINITI | Q45 | N/A | with Front Steering Rack; Supplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 1991 | INFINITI | Q45 | N/A | with Front Steering Rack; Supplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 1990 | INFINITI | Q45 | N/A | with Front Steering Rack; Supplied without EVO Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| No rows match your filter. | ||||