/live/media/A1/A1_261938_Fro.jpg)
Cardone 26-1938 Rack and Pinion Assembly
| Brand | Cardone 26-1938 |
|---|---|
| Casting Material | Steel; Aluminum |
| Distance Between Mounting Holes (in) | 0.00 |
| Distance Between Mounting Holes (mm) | 0.00 |
| E-Waste | No |
| Hose Port Type | O-Ring |
| Input Shaft Diameter (in) | 0.65 |
| Input Shaft Diameter (mm) | 16.51 |
| Input Shaft Length (in) | 1.06 |
| Input Shaft Length (mm) | 27.00 |
| Number of Mounting Holes | 1 |
| Package Contents | Rack and Pinion, Sealing Kit, Instruction Sheet |
| Pressure Port Thread Size | M14 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 47.06 |
| Rack Length (mm) | 1195.40 |
| Return Port Thread Size | M16 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 1.82 |
| Thread Length (mm) | 46.23 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 2.63 |
| Product line | Rack and Pinion Assembly |
| Fits | Eagle, Mitsubishi, Plymouth, and Dodge · 10 vehicles |
Remanufactured OE part. Built to original equipment standards for a precise fit and dependable performance.
New sealing components. All rubber seals are replaced to help eliminate internal leaks.
Factory tested. Each unit is driven under extreme conditions to verify communication and operation.
Cross-references Dodge MB501126, Dodge MB564991 and Eagle (cars) MB501126 for the same application. See all 10.
Remanufactured Electronic Power Steering Rack
Cardone 26-1938 is a remanufactured rack and pinion assembly built for direct replacement in select Mitsubishi Galant and Plymouth Laser applications. It is rebuilt with new sealing components, specialized lubricant, and protective coating to support dependable steering response and long service life.
The Cardone Rack and Pinion Assembly line focuses on OE-style fit and verified operation. Each unit is factory test driven to check performance under demanding conditions and confirm on-car communications where applicable.
Key Features
- Remanufactured Original Equipment-style rack and pinion assembly for a precise vehicle fit
- New spool valve seals and rack donut seals installed to reduce internal leakage
- 100% replacement of rubber sealing components
- Specialized lubricant applied for extended service life
- Factory test driven to simulate extreme operating conditions
- Protective coating helps resist corrosion and rust
- Black steering rack with steel and aluminum construction
- Includes tie rod ends and sealing kit
Product Details
Part number 26-1938 is engineered for steering systems that require a remanufactured electronic power steering rack and pinion assembly with O-ring hose ports, M14 x 1.5 pressure port threads, and M16 x 1.5 return port threads. It measures 47.06 inches in rack length and uses a 2.63 lock-to-lock turn ratio for consistent steering feel. This part cross-references Mitsubishi MB501721 and Dodge MB501126 for the same application.
Fits 1989-1993 Mitsubishi Galant, N/A. Fits 1990-1991 Plymouth Laser, N/A. Search terms such as Mitsubishi Galant rack and pinion assembly 1989-1993 and Plymouth Laser steering rack replacement 1990-1991 align with this application. The part number 26-1938 is also used when sourcing a remanufactured steering rack for these vehicles.
Common Steering Problems This Part Can Address
- Excessive steering play or loose steering response
- Internal rack leakage causing fluid loss or poor assist
- Hard steering after startup or inconsistent assist
- Steering that does not return to center normally
- Noise or whine related to worn rack seals or air in the system
Installation Notes
For 1989-1993 Mitsubishi Galant and 1990-1991 Plymouth Laser applications, install an in-line filter and use OE fluid. Flush the hydraulic power steering system when installing the rack and pinion assembly with inner tie rods for warranty validation. After installation, bleed the steering system completely and verify front-end alignment.
Quality Assurance
Each Cardone 26-1938 rack and pinion assembly is remanufactured to rigorous quality and performance standards, then factory test driven to verify operation before release. The process replaces worn sealing components, applies specialized lubricant, and uses a protective finish to support durability in service.
| Year | Make | Model | Drive Type | Transmission | Position | Notes |
|---|---|---|---|---|---|---|
| 1993 | Mitsubishi | Galant | — | — | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 1992 | Mitsubishi | Galant | AWD | Manual | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 1992 | Mitsubishi | Galant | FWD | — | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 1991 | Mitsubishi | Galant | AWD | Manual | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 1991 | Mitsubishi | Galant | FWD | — | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 1991 | Plymouth | Laser | FWD | — | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 1990 | Mitsubishi | Galant | FWD | — | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 1990 | Mitsubishi | Galant | AWD | — | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 1990 | Plymouth | Laser | — | — | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 1989 | Mitsubishi | Galant | — | — | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| No rows match your filter. | ||||||