/live/media/A1/A1_262055_Fro.jpg)
Cardone 26-2055 Rack and Pinion Assembly
| Brand | Cardone 26-2055 |
|---|---|
| Casting Material | Aluminum |
| Distance Between Mounting Holes (in) | 25.19 |
| Distance Between Mounting Holes (mm) | 639.78 |
| E-Waste | No |
| Hose Port Type | Banjo/washer |
| Input Shaft Diameter (in) | 0.69 |
| Input Shaft Diameter (mm) | 17.50 |
| Input Shaft Length (in) | 3.19 |
| Input Shaft Length (mm) | 80.95 |
| Number of Mounting Holes | 4 |
| Package Contents | Rack and pinion, sealing kit, instruction sheet |
| Pressure Port Thread Size | M14 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 45.75 |
| Rack Length (mm) | 1162.05 |
| Return Port Thread Size | M16 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.38 |
| Thread Length (mm) | 60.45 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 2.88 |
| Product line | Rack and Pinion Assembly |
| Fits | Mazda · 6 vehicles |
Remanufactured OE part. Delivers a precise fit with factory-tested performance.
Aluminum construction. Lightweight housing with a protective finish for corrosion resistance.
New sealing components. Replaced rubber seals help eliminate internal leaks and improve reliability.
Cross-references Mazda EG2132110D, Mazda EG2132110E and Mazda EG2132110F for the same application. See all 6.
Cardone Electronic Rack and Pinion for Mazda CX-7
Restore precise steering response with this remanufactured Cardone rack and pinion assembly for the 2007-2012 Mazda CX-7. Part number 26-2055 is built with new premium components, including replaced rubber sealing parts and specialized lubricant for long-term reliability.
Compatible with Mazda CX-7 steering systems, this Cardone Rack and Pinion Assembly is remanufactured to OE fit standards and tested under simulated road conditions. The result is a direct-fit steering gear solution for drivers addressing steering feel, leaks, or internal bypass concerns on the Mazda CX-7.
Key Features
- Remanufactured Original Equipment-style rack and pinion assembly
- Fits 2007-2012 Mazda CX-7, N/A
- Part number 26-2055
- Aluminum casting with black protective finish
- 100% replacement of rubber sealing components
- New spool valve seals and rack donut seals installed where applicable
- Factory test driven to verify operation and on-car communications
- Includes rack and pinion, sealing kit, and instruction sheet
- Tie rod ends included
- Hose port type: Banjo/Washer
- Pressure port thread size: M14 x 1.5; return port thread size: M16 x 1.5
Product Details
Cardone 26-2055 is a remanufactured electronic power steering rack and pinion assembly engineered for the Mazda CX-7. The unit uses new sealing components, a specialized lubricant, and a corrosion-resistant finish to support durability in daily driving. With a rack length of 45.75 in., 4 mounting holes, and a total lock-to-lock turn count of 2.88, this assembly is built around the original vehicle geometry for accurate steering feel.
This part cross-references Mazda OE numbers such as EG2132110D and EH4432110C for the same application. For Mazda CX-7 owners searching for a remanufactured steering rack, electronic power steering rack, or 2007-2012 Mazda CX-7 rack and pinion assembly, 26-2055 provides a direct replacement path.
Common Problems This Part Can Address
- Steering that feels hard during the first few minutes of driving
- Internal fluid bypass caused by worn rack seals
- Power steering pump whine related to air in the hydraulic system after service
- Steering that does not return to center after a turn
- Leaks from worn sealing components in the rack and pinion assembly
Installation Notes
- Fits 2007-2012 Mazda CX-7, N/A.
- Install an in-line filter and use OE fluid.
- Flush the hydraulic power system when installing the rack and pinion assembly with inner tie rods for warranty validation.
- Bleed the steering system completely after installation to remove trapped air.
- Check front-end alignment and inspect return-line routing if steering does not return to center.
Quality Assurance
Each Cardone rack and pinion assembly is remanufactured to rigorous quality and performance standards and factory test driven to confirm operation under demanding conditions. The remanufacturing process also reduces energy and raw material use compared with producing a new part.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2012 | Mazda | CX-7 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2011 | Mazda | CX-7 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2010 | Mazda | CX-7 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2009 | Mazda | CX-7 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2008 | Mazda | CX-7 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2007 | Mazda | CX-7 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| No rows match your filter. | ||||